Modeling and simulation of water-gas shift in a heat exchange integrated microchannel converter

The aim of this study is to analyze the operation of a heat exchange integrated, Pt-CeO₂/Al₂O₃ washcoated microchannel water-gas shift (WGS) reactor under fuel processing conditions by mathematical modeling techniques. In this context, operation of a single microchannel is modeled, whose outcomes are compared with experimental data obtained from the literature. Simulations show good agreement with the experimental data, with an error below 4%. Upon its validation, single channel model is used to simulate a heat exchange integrated microchannel reactor, which involves periodically located groups of reaction and air-fed cooling channels. The integrated reactor is modeled by 2D Navier-Stokes equations together with reactive transport of heat and mass. Incorporation of heat exchange function minimizes the impact of thermodynamic limitations on WGS by precise regulation of reaction temperature and gives 77.6% CO conversion, which is 67.4% in the absence of cooling. Improvement in conversion from 69.2% to 77.6% is observed upon increasing feed temperature of the reaction stream from 565 to 595 K, above which the reaction is controlled by equilibrium. Coolant feed temperature, however, changes conversion only by <1%. Isothermal conditions are obtained upon feeding reaction and coolant channels at 595 K and 587 K, respectively. Changes in the thickness and material of the wall between the channels give limited deviations in conversion. An integrated reactor with 2.37 L volume is sufficient for supplying H₂ necessary to drive a 1 kW PEMFC unit.     

Trading off between makespan and customer responsiveness in flow shop sequencing

There is a vast literature on the problem of how to sequence products in a blocking flow shop so as to minimise makespan. It is often the case, however, that problem instances have multiple optima, and that within the set of optimal (or near optimal) solutions, other characteristics of importance vary substantially. Thus, the solution found by an approach that solely minimises makespan may be inferior to alternate solutions that have comparable makespan but superior value with regard to other criteria. In this paper, we demonstrate this by considering makespan and customer responsiveness, the potential that a sequence has for modification so as to incorporate customer order changes after production has begun. We consider the relationship between these two metrics and present computational results to show how different approaches to making trade-offs between them can change the solution characteristics substantially.     

OBTAINING SCARLET SAGE (SALVIA COCCINEA) EXTRACT THROUGH HOMOGENIZER- AND ULTRASOUND-ASSISTED EXTRACTION METHODS

Scarlet sage (Salvia coccinea) leaves were extracted with water, ethanol, methanol, and aqueous mixtures of those solvents by homogenizer-assisted extraction (HAE) and ultrasound-assisted extraction (UAE) methods, which are novel technologies used for this purpose. The best results were compared with those obtained by the conventional Soxhlet method (SM). Total phenolic content was expressed in gallic acid equivalent (GAE) per g of dried leaf. Free radical scavenging activity for the antioxidant capacity was tested by 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical. The greatest amount of extraction was achieved by pure water with the value of 368.87 mg/g dried matter and the highest total phenolic content was observed by 100% methanol as 43.18 mg-GAE/g dried matter, both obtained by the HAE method. The mint leaves extracted by SM exhibited the highest antioxidant capacity, with a value of 90.55% for inhibition of DPPH radical.     

Determination of material parameters of a viscoplastic model by genetic algorithm

Macroscopic (continuum) and microscopic models, used for simulation of material behaviors under different loading conditions, contain a large number of material parameters and determination of these parameters is an important and difficult issue in the modeling. The aim of this work essentially deals with parameter determination procedure of any viscoplasticity model. In this study, genetic algorithm (GA) parameter optimization procedure has been proposed to determine material parameters of viscoplastic models. Parameter determination capability of the GA optimization method was tested by using VBO model which one of the viscoplasticity theory with no yield surface and loading–unloading conditions. Fourteen material parameters of VBO model are determined using uniaxial loading–unloading stress strain curves of high density polyethylene (HDPE). Using these material parameters, creep and relaxation behaviors of HDPE are simulated. A good match with experimental results is obtained. Apart from many existing studies in the literature, GA optimization procedure is applied to determine material parameters instead of trial and error procedure. This method can also be used to determine materials parameters of other viscoplasticity theories for all kinds of materials.     

Investigation of process performance and fouling mechanisms in micellar-enhanced ultrafiltration of nickel-contaminated waters

Nickel removal from aqueous solution by micellar-enhanced ultrafiltration (MEUF) with relatively low transmembrane pressures was investigated at varying conditions of sodium lauryl ether sulfate (SLES) and nickel concentrations, transmembrane pressure and sodium chloride content. Process employed in continuous filtration mode, could be operated within a short time of 30 min presenting high rejection of nickel and SLES at high transient fluxes. Under the effect of increasing transmembrane pressure, the rejection of nickel and SLES increased, but the transient flux decreased. The existence of salt caused to decrease both rejections and flux. Nickel rejection, SLES rejection and flux were established as 98.6%, 75.7% and 0.304 m(3)/m(2)h, respectively, for the conditions of surfactant to metal (S/M) ratio of 10 (SLES = 2 mM), transmembrane pressure of 250 kPa without NaCl content at the end of 90-min operation time. The analyses related to the membrane fouling were carried out using adsorptive fouling models. It has been determined that, the fouling occurs as a dynamic function of various process conditions studied, and depends strongly on mechanisms controlled by the formation of gel layer and its bridging over the pore entrances simultaneously together with partial constriction of membrane pores by surfactant adsorption.     

National Standards of Impulse Electrical Voltage of the Russian Federation and the Republic of Belarus: Additional Comparisons

Measurement Techniques - This article discusses supplementary comparison results of initial national standards of the impulse electrical voltage, which resulted in confirmation of the accuracy of...     

Sturctural characteristics or the surface of cold-rolling rolls refitted by radiation heat treatment

At present, besides the conventional methods for strengthening (bulk hardening, treatment by high-frequency current) parts operating under high contact loads and elevated wear, methods of surface treatment by concentrated energy fluxes, including laser and electron-beam irradiation, are used. Treatment of the surface of parts made of tool steels by a focused beam in an optimum regime improves their hardness and wear resistance. The present work is devoted to investigating the properties of cold-rolling rolls refitted by electron beam treatment.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 2–4, September, 1995.