凝析气藏相态参数实验研究

油气藏流体主要有烃类成分组成,在油藏及地面条件下,这种烃类混合物的物理性质取决于其化学成分及给定的温度和压力。对于烃类的相态特征及流体组分研究在油气田开发中具有重要的意义,尤其是凝析气藏田。对海榆和10井的研究,归纳总结其流体PVT性质,为其开发提供科学依据。     

戏画人生——关良的水墨戏剧人物画研究

关良是中国近现代画坛上一位不可或缺的大师,也是最早将西方绘画艺术介绍到我国的先行者之一。从关良留下的作品看,他酷爱传统戏剧,对戏剧表现语言深有体味。他不仅将西方现代派的绘画理念引入中国传统的水墨画之中,也在油画中表现了许多传统中国画的元素,在他的灵魂里,东西方艺术已经融为一体。重新审视其独特艺术语言,希望能为当代画坛提供一些启示。     

古尼虫草深层发酵工艺的空气净化系统染菌浅析

通过调查本室约2年的染菌统计,找出了导致染菌的主要因素--空气净化系统带菌.介绍了空气净化系统的工艺流程及主要设备,分析了其染菌原因,制定了措施,并说明了实施后的效果.     

Bioactive ceramic coatings containing carbon nanotubes on metallic substrates by electrophoretic deposition

A range of potentially bioactive ceramic coatings, based on combinations of either hydroxyapatite (HA) or titanium oxide nanoparticles with carbon nanotubes (CNTs), have been deposited on metallic substrates, using electrophoretic deposition (EPD). Sol–gel derived, ultrafine HA powders (10–70 nm) were dispersed in multi-wall nanotube-containing ethanol suspensions maintained at pH = ∼3.5 and successfully coated onto Ti alloy wires at 20 V for 1–3 min For TiO₂/CNT coatings, commercially available titania nanopowders and surface-treated CNTs in aqueous suspensions were co-deposited on stainless steel planar substrates. A field strength of 20 V/cm and deposition time of 4 min were used working at pH = 5. Although the co-deposition mechanism was not investigated in detail, the evidence suggests that co-deposition occurs due to the opposite signs of the surface charges (zeta potentials) of the particles, at the working pH. Electrostatic attraction between CNTs and TiO₂ particles leads to the creation of composite particles in suspension, consisting of TiO₂ particles homogenously attached onto the surface of individual CNTs. Under the applied electric field, these net negatively charged “composite TiO₂/CNT” elements migrate to and deposit on the anode (working electrode). The process of EPD at constant voltage conditions was optimised in both systems to achieve homogeneous and reasonably adhered deposits of varying thicknesses on the metallic substrates_.     

X-ray photoelectron spectroscopy characterization of the interface between Ag electrode and PVDF film treated by electric poling

Interface changes induced by electric poling treatment between an Ag electrode deposited by vacuum thermal evaporation and a polymer thin film have been investigated. The polymer film poly (vinylidene fluoride) (PVDF), a fluoropolymer of repeat unit (–CH₂–CF₂–) was treated under electric poling at high temperature of 90°C. The characterization was accomplished using X-ray photoelectron spectroscopy (XPS) as a primary tool. The results indicate that the piezoelectricity of PVDF thin films and adhesion force between polymer thin film and metallic electrode are improved by electric poling and chemical bond joint.     

Reproducibility and stability of N–Al codoped p-type ZnO thin films

Reproducible and stable p-type ZnO thin films have been prepared by the N–Al codoping method. Secondary ion mass spectroscopy measurements demonstrate that N and Al are incorporated into ZnO. The resistivity, carrier concentration, and Hall mobility are typically of 50–100 Ωcm, 1×10¹⁷–8×10¹⁷ cm⁻³, and 0.1–0.6 cm²/Vs, respectively, for the N–Al codoped p-type ZnO films. Hall measurement, X-ray diffraction, and optical transmission were carried out to investigate the changes of the properties with the storage period. Results show that the p-type characteristics of the N–Al codoped ZnO films are of acceptable reproducibility and stability. In addition, the N–Al codoped p-type ZnO films have good crystallinity and optical quality. The properties are time independent.     

.NET Web services和FCS技术在煤矿安全监管中的应用

分析了现场总线技术(FCS)在分布式测控方面的优势,比较了.NETFrame和WindowsDNA框架下Web服务的适用范围。根据煤矿行业特点,提出了应用.NETWebservices和FCS技术构建煤矿安全监管系统的技术方案。     

铝电解阴极用TiB2涂层的研究现状

简要介绍了我国铝电解工业的发展现状,指出了我国预焙铝电解槽寿命短的弊端;并分析了电解槽早期破损的原因和采用TiB2阴极涂层技术提高电解槽寿命的机理;叙述了新一代常温固化TiB2阴极涂层的特点,并强调应用新一代常温固化TiB2阴极涂层技术,提高电解槽寿命,是符合我国国情且行之有效的措施。