A novel model reduction method based on balanced truncation

The main goal of this paper is to construct an efficient reduced-order model (ROM) for unsteady aerodynamic force modeling. Balanced truncation (BT) is presented to address the problem. For conventional BT method, it is necessary to compute exact controllability and observability grammians. Although it is relatively straightforward to compute these matrices in a control setting where the system order is moderate, the technique does not extend easily to high order systems. In response to the challenge, snapshots-BT (S-BT) method is introduced for high order system ROM construction. The outline idea of the S-BT method is that snapshots of primary and dual system approximate the controllability and observability matrices in the frequency domain. The method has been demonstrated for 3 high order systems: (1) unsteady motion of a two-dimensional airfoil in response to gust, (2) AGARD 445.6 wing aeroelastic system, and (3) BACT (benchmark active control technology) standard aeroservoelastic system. All the results indicate that S-BT based ROM is efficient and accurate enough to provide a powerful tool for unsteady aerodynamic force modeling.     

Fractal model of lightning channel for simulating lightning strikes to transmission lines

How to accurately evaluate the direct-strike lightning protection is one of the key issues in the design of transmission lines. In this paper, three important issues in applying the fractal simulation to the lightning protection of transmission lines were discussed, including the criteria and implementation of upward leader inception, the connection with the magnitude of lightning current, and the calculation and control of fractal dimensions. Then we conducted the simulation iterately, leading to statistical results, which indicate that even if the transmission line satisfies the perfect shielding condition, shielding failure fault remains possible. Furthermore, we calculated the shielding failure fault rates of an EHV line with different ground obliquities and distribution of strike points over the interval between two neighboring towers along a UHV-DC line to find out the weak point of transmission-line lightning protection. This work provides a promising approach for improving the lightning protection property of transmission lines by optimizing the configuration of shielding wires and phase or pole conductors.     

Optimization of material structure of ploy-Si thin film based on Al induced crystallization

Based on Al induced crystallization (AIC) method, influences of different material structures on formation and characteristics of ploy-silicon thin films were studied and optimized. Al-Si films on glass with different structures (Si/Al/Glass, Al/Si/Glass, Si/Al/…/Si/Al/Glass) were deposited on glass substrates by sputtering method. All samples were annealed for MIC with varied time processes under 500℃ N2 environment. X-ray diffraction test and scanning electron microscope were adopted to characterize cryst...     

Hybrids perfluorosulfonic acid ionomer and silicon oxide membrane for application in ion-exchange polymer-metal composite actuators

This paper reports a new technique to fabricate an ion-exchange polymer-metal composite (IPMC) actuator. This technique is based on a hybrid organic-inorganic composite membrane. In the fabrication course, silica oxide particles, prepared from hydrolysis of tetraethyl orthosilicate in situ with sol-gel reaction, co-crystallize with perfluorosulfonate acid (PFSA) ionomer. Attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR) analyses demonstrate that a highly water-saving hybrid mem...     

Flux pinning effect of cubic equiaxed morphology and its Ti stabilizing in Nb<Subscript>3</Subscript>Sn superconductors

Two sets of internal-Sn Nb3Sn superconducting strands were fabricated through RRP method, one with 2 wt% of Ti alloyed in Sn core and the other just pure Sn. Four reaction temperatures of 650℃, 675℃, 700℃ and 725℃ and 128 h duration were applied for A15 phase formation heat treatment after Cu-Sn alloying procedure of 210℃/50 h + 340℃/25 h. For the heat-treated coil samples, transport non-Cu JC was examined through standard 4-probe technique and phase microstructure was observed by means of Field Emission Sc...     

Restraint of mid-spatial frequency error in magneto-rheological finishing (MRF) process by maximum entropy method

In order to restrain the mid-spatial frequency error in magnetorheological finishing (MRF) process, a novel part-random path is designed based on the theory of maximum entropy method (MEM). Using KDMRF-1000F polishing machine, one flat work piece (98 mm in diameter) is polished. The mid-spatial frequency error in the region using part-random path is much lower than that by using common raster path. After one MRF iteration (7.46 min), peak-to-valley (PV) is 0.062 wave (1 wave =632.8 nm), root-mean-square (RM...     

Research on indoor experimentation of range SAL imaging system

By means of advantages of both SAR and lidar, the combination of the techniques of (inverse) synthetic aperture and lidar makes it possible to obtain high resolution 2-D image. In this paper, an indoor experimental system of inverse synthetic aperture lidar imaging is given and a processing approach is presented. The given system is in the mode of lidar system with separated receiver and transmitter, which can effectively eliminate the jamming from the lens or/and the intersection between two optic fibers. ...     

Gearbox fault diagnosis of rolling mills using multiwavelet sliding window neighboring coefficient denoising and optimal blind deconvolution

Fault diagnosis of rolling mills, especially the main drive gearbox, is of great importance to the high quality products and long-term safe operation. However, the useful fault information is usually submerged in heavy background noise under the severe condition. Thereby, a novel method based on multiwavelet sliding window neighboring coefficient denoising and optimal blind deconvolution is proposed for gearbox fault diagnosis in rolling mills. The emerging multiwavelets can seize the important signal proce...     

Growth of Ag nanocrystals on multiwalled carbon nanotubes and Ag-carbon nanotube interaction

The experimental investigations on the interaction between Ag-nanocrystal particles (Ag-NCPs) and carbon nanotubes (CNTs) in Ag-nanocrystal particles/carbon nanotubes (Ag-NCPs/CNTs) hybrid structures were reported. The growth of Ag-NCPs on multiwalled carbon nanotubes (MWCNTs) was carried out by thermal evaporation deposition. High-resolution transmission electron microscopy and X-ray diffraction analyses revealed that Ag-NCPs had the crystal lattice feature of face-centered cube (fcc). The growth of Ag-NCPs on MWCNTs induced the cross-section deformation of MWCNT. The experimental results also showed that the synthesized Ag-NCPs/CNTs hybrid structure appeared as quasi-one dimensional nanowires containing the Ag-NCP/CNT hetero-junction. There was local cross-section deformation on MWCNTs at the interface of hetero-junction. These results involve the important topic about fundamental and practical studies for structure of MNCPs on CNTs and also find clues to further research of Ag nanocrystal growing on MWCNTs and related Ag-CNT interaction.     

Composite silicone rubber of high piezoresistance repeatability filled with nanoparticles

The ruthenium oxide nanoparticles with size less than 20 nm were fabricated by annealing the metallic ruthenium nanoparticles in air, which were synthesized by using the thermal reduction in the polyol solution. The rutile structure of the ruthenium oxide was proved by using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The oxide has good electron conductivity. The surface of the ruthenium oxide was modified by a vinyl silane coupling agent. The assembling of the silane to the oxide surface was proved by Infrared (IR) absorption spectroscopy. By mixing the nanoparticles with poly(methylvinylsiloxane) (PMVS) silicone rubber, a composite filled with dispersive conducting phase was fabricated. The temperature dependent conductivity shows that the electron transportation through composite is mainly dominated by tunneling. The measurement of piezoresistance shows that the composite at low strain has high piezoresistance repeatability. The 3D reconstruction images of the composite filled with carbon black or ruthenium oxide show that the aggregation of the nanoparticles differs much for two composites. The narrow distribution range of the particle size was thought to be the main factor for the high piezoresistance recurrence.