Dump技术在Solaris系统恢复中的应用研究

对Solaris操作系统核心部分、数据文件部分的备份和恢复方法进行了描述,论述了Dump技术在Solaris系统恢复中的应用.分析表明,Dump技术是Solaris操作系统恢复技术中最为快捷有效的方法之一,它可以使系统快速地恢复正常,保证系统的稳定运行.     

A Cellular Automata Based Rainfall-Runoff Model for Urban Inundation Analysis Under Different Land Uses

Recently many runoff models based on cellular automaton (CA) have been developed to simulate floods; however, the existing models cannot be readily applied to complex urban environments. This study proposes a novel rainfall-runoff model based on CA (RRCA) to simulate inundation. Its main contributions include a fine runoff generation process that considers 12 urban scenarios rather than a single land use type and the confluence process determined by the new transition rules considering water supply and demand (WS-WD transition rules). RRCA was compared with another CA based flood model (E2DCA). With the benchmark model, the results showed that there was good agreement, with an R-squared greater than 0.9, and that RRCA was more sensitive to waterlogging levels than E2DCA. Furthermore, the simulated vegetation interception, infiltration and drainage processes had varying degrees of impact on waterlogging. Corresponding measures can be taken in urban flood management according to the identification of areas experiencing drainage difficulties.

     

磷酸镁水泥制备试验研究

基于水工建筑物的应急抢险与快速修补加固处理的需要,运用常规的水泥凝结时间、强度等基本性能试验,研究各材料组成对磷酸镁水泥性能的影响,确定磷酸镁水泥配方,并对不同粒径砂土的磷酸镁水泥砂浆水胶比、养护条件、强度等进行了试验研究。结果表明,硼砂是磷酸镁水泥的有效缓凝剂;氧化镁细度对水泥性能有明显影响,氧化镁越细水泥早期强度越高,但细度过细凝结时间将难以满足施工要求;磷酸镁水泥配方为:P/M值1∶3,硼砂掺量10%,氧化镁细度宜为195 m~2/kg左右;磷酸镁水泥砂浆抗压强度与胶水比具有线性相关性,与龄期呈对数关系;水中养护与标准养护相比,抗压强度降低约6%～27%,磷酸盐水泥在长期水下环境中的适用性需论证。研究成果可为水工建筑物的应急抢险与快速修补加固处理提供参考和依据。     

Differential Evolution Algorithm Based Self-adaptive Control Strategy for Fed-batch Cultivation of Yeast

In the fed-batch cultivation of Saccharomyces cerevisiae, excessive glucose addition leads to increased ethanol accumulation, which will reduce the efficiency of glucose utilization and inhibit product synthesis. Insufficient glucose addition limits cell growth. To properly regulate glucose feed, a different evolution algorithm based on self-adaptive control strategy was proposed, consisting of three modules (PID, system identification and parameter optimization). Performance of the proposed and conventional PID controllers was validated and compared in simulated and experimental cultivations. In the simulation, cultivation with the self-adaptive control strategy had a more stable glucose feed rate and concentration, more stable ethanol concentration around the set-point (1.0 g•L^-1), and final biomass concentration of 34.5 g-DCW•L^-1, 29.2% higher than that with a conventional PID control strategy. In the experiment, the cultivation with the self-adaptive control strategy also had more stable glucose and ethanol concentrations, as well as a final biomass concentration that was 37.4% higher than that using the conventional strategy.     

Evaluating Visual Properties via Robust HodgeRank

International Journal of Computer Vision - Nowadays, how to effectively evaluate visual properties has become a popular topic for fine-grained visual comprehension. In this paper we study the...     

Sensitive attribute privacy preservation of trajectory data publishing based on l-diversity

Distributed and Parallel Databases - The widely application of positioning technology has made collecting the movement of people feasible for knowledge-based decision. Data in its original form...     

ACS运动控制器运动实时暂停功能的实现方法

提出了一种ACS运动控制器运动实时暂停功能的实现方法。该方法通过将大的程序段按时间细分成细小段轨迹运动程序,然后在各细小段轨迹运动程序之间加入条件控制语句,使各细小轨迹运动程序段逐条载入到运动命令队列中,从而有效控制整个程序的运行,实现运动实时暂停功能。该方法已在基于ACS运动控制器的卷簧机数控系统中得到应用,取得了理想的运动实时暂停效果,且未出现明显的累积误差。     

基于软件无线电的基带调制系统设计

针对通信系统中基带调制的多模式的需求,基于软件无线电原理,用FPGA设计了一种可实现2ASK、2FSK、BPSK三种调制模块,在Quartus II环境中利用VHDL语言完成了芯片程序的设计,并对其进行了仿真和功能测试,实验结果验证了用FPGA可快速实现2ASK、2FSK和BPSK基带调制功能,调制信号稳定可靠,可以用软件来控制调制方式,系统方案正确可行,而且具有良好的稳定性和灵活性.     

基于变传动比的线控转向前轮转角控制

提出一种基于混合智能变传动比技术的前轮转角控制算法;分析了车辆转向性能和转向稳定性的影响因素,利用模糊神经网络设计以控制车辆转向性能为重点的传动比控制器,利用直线拟合方法设计以转向稳定性为重点的传动比控制器,然后应用模糊软切换技术对两传动比进行切换融合,最终得出兼顾转向性能和转向稳定性的恰当总传动比;利用该传动比直接控制前轮转角,并将控制策略进行仿真实验;实验结果表明总传动比不仅在数值范围和曲线形状上更接近理想传动比,而且将对应的峰值速度控制在110km/h左右,优于其他两个分传动比的控制效果;用该传动比控制的整车稳定性和前轮路径跟踪能力较好,可见整个控制策略的有效性。     

逆向工程点云数据采集系统设计及应用

针对目前四轴激光测量机的不足,设计了一种五轴逆向工程点云数据采集系统;在四轴的基础上增加了激光测头的旋转轴,采用基于PCI总线的运动控制系统及USB总线的数据采集系统,并植入了图像采集系统,通过二次开发技术利用Windows的应用程序编程接口函数对扫描范围进行自动识别;软件系统使用了采集路径规划及测量数据优化处理算法;在原始数据测量及曲面反求建模两个方面进行了实例应用,零件大斜度面和垂直于工作台的表面均能覆盖测量,并且所有点云数据是一次测量完成,实验结果验证了本系统的可行性与稳定性。