Simultaneous amplification by Er ions and SRS in an Er-doped germano-silica fiber

A flat signal gain over in the entire C- and L-bands by erbium (Er) ions' radiative transition and stimulated Raman scattering in an Er-doped germano-silica fiber can be obtained if proper values of the concentration of Er and background loss in a fiber core are obtained during the fiber fabrication process. The optimized conditions for the flat C- and L-band gain are analyzed as functions of Er concentrations. Even for a low-gain value provided by a germano-silica core fiber with a low Er concentration and an optimum fiber length, a relatively low pump is required to obtain the flat gain band.     

Relationship between ADC performance and requirements of digital-IF receiver for WCDMA base-station

The recent rapid development of digital wireless systems has led to the need for multistandard, multichannel radiofrequency (RF) transceivers. The paper presents the relationship between the performance of a bandpass-sampling analog-to-digital converter (ADC) and the requirements of a digital intermediate-frequency receiver for a wideband code-division multiple-access (WCDMA) base-station. As such, the ADC signal-to-noise ratio (SNR), the derivation of the receiver sensitivity using the SNR/spurious free dynamic range (SFDR) of the ADC, the effect of the ADC clock jitter and receiver linearity, plus the relationship between the receiver IF and the ADC sampling frequency are all analyzed. As a result, when a WCDMA base-station receiver has a data rate of 12.2 kbps, bit error rate (BER) of 0.001, and channel index, k, of 5 (sampling frequency of 122.88 MHz and IF of 92.16 MHz), the performance of a bandpass-sampling ADC was analytically determined to require a resolution of 14 bits or more, SNR of 66.6 dB or more, SFDR of 86.5 dBc or more, and total jitter of 0.2 ps or less, including internal ADC jitters and clock jitters.     

Analyzing the Boundary Thermal Resistance of Epitaxially Grown Fe<Subscript>2</Subscript>VAl/W Layers by Picosecond Time-Domain Thermoreflectance

To gain deep insight into the mechanism of phonon scattering at grain boundaries, we investigated the boundary thermal resistance by using picosecond pulsed-laser time-domain thermoreflectance for epitaxially grown W/Fe₂VAl/W films. By using radio-frequency magnetron sputtering, we prepared a series of the three-layer films whose Fe₂VAl thickness ranged from 1 nm to 37 nm. The fine oscillation of reflectivity associated with the top W layer clearly appeared in synchrotron x-ray reflectivity measurements, indicating a less obvious mixture of elements at the boundary. The areal heat diffusion time, obtained from the time-domain thermoreflectance signal in the rear-heating front-detection configuration, reduced rapidly in samples whose Fe₂VAl layer was thinner than 15 nm. The ～ 10% mismatch in lattice constant between Fe₂VAl and W naturally produced the randomly distributed lattice stress near the boundary, causing an effective increase of boundary thermal resistance in the thick samples, but the stress became homogeneous in the thinner layers, which reduced the scattering probability of phonons.     

Harmonic decomposition in PDE-based denoising technique for magnetic resonance electrical impedance tomography

Recent progress in magnetic resonance electrical impedance tomography (MREIT) research via simulation and biological tissue phantom studies have shown that conductivity images with higher spatial resolution and accuracy are achievable. In order to apply MREIT to human subjects, one of the important remaining problems to be solved is to reduce the amount of the injection current such that it meets the electrical safety regulations. However, by limiting the amount of the injection current according to the safety regulations, the measured MR data such as the z-component of magnetic flux density Bz in MREIT tend to have low SNR and get usually degraded in their accuracy due to the nonideal data acquisition system of an MR scanner. Furthermore, numerical differentiations of the measured Bz required by the conductivity image reconstruction algorithms tend to further deteriorate the quality and accuracy of the reconstructed conductivity images. In this paper, we propose a denoising technique that incorporates a harmonic decomposition. The harmonic decomposition is especially suitable for MREIT due to the physical characteristics of Bz. It effectively removes systematic and random noises, while preserving important key features in the MR measurements, so that improved conductivity images can be obtained. The simulation and experimental results demonstrate that the proposed denoising technique is effective for MREIT, producing significantly improved quality of conductivity images. The denoising technique will be a valuable tool in MREIT to reduce the amount of the injection current when it is combined with an improved MREIT pulse sequence.     

A 2.4-GHz Low-Power Low-IF Receiver and Direct-Conversion Transmitter in 0.18-μm CMOS for IEEE 802.15.4 WPAN Applications

In this paper, a low-power low-IF receiver and a direct-conversion transmitter (DCT) suitable for the IEEE standard 802.15.4 radio system at the 2.4-GHz band are presented in 0.18-mum deep n-well CMOS technology. By using vertical NPN (V-NPN) bipolar junction transistors in the baseband analog circuits of the low-IF receiver, the image rejection performance is improved and the power consumption is reduced. In addition, by applying the V-NPN current mirrored technique in a DCT, the carrier leakage is reduced and the linearity performance is improved. The receiver has 10 dB of noise figure, -15 dBm of third-order input intercept point, and 35 dBc of image rejection. The transmitter has more than -2 dBm of transmit output power, -35 dBc of local oscillator leakage, and -46 dBc of the transmit third harmonic component. The receiver and transmitter dissipate 6 and 9 mA from a 1.8-V supply, respectively     

Reconstruction of conductivity and current density images using only one component of magnetic field measurements

Magnetic resonance current density imaging (MRCDI) is to provide current density images of a subject using a magnetic resonance imaging (MRI) scanner with a current injection apparatus. The injection current generates a magnetic field that we can measure from MR phase images. We obtain internal current density images from the measured magnetic flux densities via Ampere's law. However, we must rotate the subject to acquire all of the three components of the induced magnetic flux density. This subject rotation is impractical in clinical MRI scanners when the subject is a human body. In this paper, we propose a way to eliminate the requirement of subject rotation by careful mathematical analysis of the MRCDI problem. In our new MRCDI technique, we need to measure only one component of the induced magnetic flux density and reconstruct both cross-sectional conductivity and current density images without any subject rotation.     

Multi-phased VSG CDMA with level clipping for high-rate transmission systems

In this letter, a multi-phased CDMA system employing a variable spreading gain (VSG) approach is proposed for high-rate applications, based on four algorithms for selecting a multi-code set. From simulation results, in addition to simple receiver structure thanks to level clipping, the multi-phased VSG CDMA system provides an high bit rate transmission, while maintaining an acceptable performance degradation.     

Biodegradable Thin Metal Foils and Spin‐On Glass Materials for Transient Electronics

Biodegradable substrates and encapsulating materials play critical roles in the development of an emerging class of semiconductor technology, generally referred as “transient electronics”, whose key characteristic is an ability to dissolve completely, in a controlled manner, upon immersion in ground water or biofluids. The results presented here introduce the use of thin foils of Mo, Fe, W, or Zn as biodegradable substrates and silicate spin‐on‐glass (SOG) materials as insulating and encapsulating layers, with demonstrations of transient active (diode and transistor) and passive (capacitor and inductor) electronic components. Complete measurements of electrical characteristics demonstrate that the device performance can reach levels comparable to those possible with conventional, nontransient materials. Dissolution kinetics of the foils and cytotoxicity tests of the SOG yield information relevant to use in transient electronics for temporary biomedical implants, resorbable environmental monitors, and reduced waste consumer electronics.     

Metal Organic Framework-MXene Nanoarchitecture for Fast Responsive and Ultra-Stable Electro-Ionic Artificial Muscles

Electro-ionic soft actuators, capable of continuous deformations replacing non-compliant rigid mechanical components, attract increasing interest in the field of next-generation metaverse interfaces and soft robotics. Here, a novel MXene (Ti₃C₂T_x) electrode anchoring manganese-based 1,3,5-benzenetricarboxylate metal-organic framework (MnBTC) for ultrastable electro-ionic artificial muscles is reported. By a facile supramolecular self-assembly, the Ti₃C₂T_x-MnBTC hybrid nanoarchitecture forms coordinate bond, hydrogen bond, and hydrophilic interaction with the conducting polymer of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), resulting in a mechanically flexible and electro-ionically active electrode. The superior electrical and electrochemical performances of the electrode stem from the synergistic effects between intrinsically hierarchical nanoarchitecture of MnBTC and rapid electron transport behavior of Mxene, leading to fast diffusion and accommodation of ions in the ion-exchangeable membrane. The developed artificial muscle based on Ti₃C₂T_x-MnBTC is found to exhibit high bending displacement (12.5 mm) and ultrafast response time (0.77 s) under a low driving voltage (0.5 V), along with wide frequency response (0.1–10 Hz) and exceptional stability (98% retention at 43,200 s) without any distortion of actuation performance. Furthermore, the designed electro-active artificial muscle is successfully used to demonstrate mimicry of eye motions including eyelid blinking and eyeball movement in a doll.