Recording of volume hologram using a beam pattern from taperedoptical fiber

A photorefractive volume hologram was recorded and probed using light diffracted from a tapered optical fiber as a reference beam. A single-mode fiber (SMF) was chemically etched and tapered to give a complicated beam pattern, and it is shown that the tapered optical fiber can be utilized to increase the storage density of the volume hologram. Spatial selectivity of the volume hologram with this method was increased by two times compared to the normal SMF referencing, which is due to the fact that the complicated beam pattern has little correlation with its shifted version     

Fixed Point Implementation of the QCELP Speech Coder

The Qualcomm code excited linear prediction (QCELP) speech coder was adopted to increase the capacity of the CDMA Mobile System (CMS). In this paper, we implemented the QCELP speech coding algorithm by using TMS320C50 fixed point DSP chip. Also the fixed point simulation was done with C language. The computation complexity of QCELP on TMS320C50 was about 33 MIPS and program size was 10k words and data memory was 4k words. In the normal call test on the CMS, where mobile to mobile call test was done in the bypass mode without double vocoding, mean opinion score for the speech quality was 3.11.     

A Time‐Constrained Information Processing Model in Ubiquitous Environments

As pervasive computing is widely adopted and reliable networks are becoming more easily accessible, there is a rapidly growing need to develop a mechanism to analyze and evaluate the performance of ubiquitous environments. This paper presents an information processing model which characterizes a ubiquitous environment where a variety of pieces of information need to be exchanged among devices within a system. The proposed model not only provides analytical tools to evaluate the performance of devices, but also makes it possible to identify key factors in designing a ubiquitous environment. For illustrative purposes, a test bed is constructed and the performance of the system is assessed based on the proposed model.     

A Temperature‐Controllable Microelectrode and Its Application to Protein Immobilization

This letter presents a smart integrated microfluidic device which can be applied to actively immobilize proteins on demand. The active component in the device is a temperature‐controllable microelectrode array with a smart polymer film, poly(N‐isopropylacrylamide) (PNIPAAm) which can be thermally switched between hydrophilic and hydrophobic states. It is integrated into a micro hot diaphragm having an integrated micro heater and temperature sensors on a 2‐micrometer‐thick silicon oxide/silicon nitride/silicon oxide (O/N/O) template. Only 36 mW is required to heat the large template area of 2 mm×16 mm to 40°C within 1 second. To relay the stimulus‐response activity to the microelectrode surface, the interface is modified with a smart polymer. For a model biomolecular affinity test, an anti‐6‐(2, 4‐dinitrophenyl) aminohexanoic acid (DNP) antibody protein immobilization on the microelectrodes is demonstrated by fluorescence patterns.     

Highly Improved Sb2S3 Sensitized‐Inorganic–Organic Heterojunction Solar Cells and Quantification of Traps by Deep‐Level Transient Spectroscopy

The light‐harvesting Sb₂S₃ surface on mesoporous‐TiO₂ in inorganic–organic heterojunction solar cells is sulfurized with thioacetamide (TA). The photovoltaic performances are compared before and after TA treatment, and the state of the Sb₂S₃ is investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, and deep‐level transient spectroscopy (DLTS). Although there are no differences in crystallinity and composition, the TA‐treated solar cells exhibit significantly enhanced performance compared to pristine Sb₂S₃‐sensitized solar cells. From DLTS analysis, the performance enhancement is mainly attributed to the extinction of trap sites, which are present at a density of (2–5) × 10¹⁴ cm^?3 in Sb₂S₃, by TA treatment. Through such a simple treatment, the cell records an overall power conversion efficiency (PCE) of 7.5% through a metal mask under simulated illumination (AM 1.5G, 100 mW cm^–2) with a very high open circuit voltage of 711.0 mV. This PCE is, thus far, the highest reported for fully solid‐state chalcogenide‐sensitized solar cells.     

High‐Performance,Transparent Thin Film Hydrogen Gas Sensor Using 2D Electron Gas at Interface of Oxide Thin Film Heterostructure Grown by Atomic Layer Deposition

A high‐performance, transparent, and extremely thin (<15 nm) hydrogen (H₂) gas sensor is developed using 2D electron gas (2DEG) at the interface of an Al₂O₃/TiO₂ thin film heterostructure grown by atomic layer deposition (ALD), without using an epitaxial layer or a single crystalline substrate. Palladium nanoparticles (≈2 nm in thickness) are used on the surface of the Al₂O₃/TiO₂ thin film heterostructure to detect H₂. This extremely thin gas sensor can be fabricated on general substrates such as a quartz, enabling its practical application. Interestingly, the electron density of the Al₂O₃/TiO₂ thin film heterostructure can be tailored using ALD process temperature in contrast to 2DEG at the epitaxial interfaces of the oxide heterostructures such as LaAlO₃/SrTiO₃. This tunability provides the optimal electron density for H₂ detection. The Pd/Al₂O₃/TiO₂ sensor detects H₂ gas quickly with a short response time of <30 s at 300 K which outperforms conventional H₂ gas sensors, indicating that heating modules are not required for the rapid detection of H₂. A wide bandgap (>3.2 eV) with the extremely thin film thickness allows for a transparent sensor (transmittance of 83% in the visible spectrum) and this fabrication scheme enables the development of flexible gas sensors.     

Photovoltaic Devices: Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells (Adv. Funct. Mater. 6/2011)

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as stand‐alone electrodes for organic solar cells have been optimized using a solvent post‐treatment method. The treated PEDOT:PSS films show enhanced conductivities up to 1418 S cm^?1, accompanied by structural and chemical changes. The effect of the solvent treatment on PEDOT:PSS has been investigated in detail and is shown to cause a reduction of insulating PSS in the conductive polymer layer. Using these optimized electrodes, ITO‐free, small molecule organic solar cells with a zinc phthalocyanine (ZnPc):fullerene C₆₀ bulk heterojunction have been produced on glass and PET substrates. The system was further improved by pre‐heating the PEDOT:PSS electrodes, which enhanced the power conversion efficiency to the values obtained for solar cells on ITO electrodes. The results show that optimized PEDOT:PSS with solvent and thermal post‐treatment can be a very promising electrode material for highly efficient flexible ITO‐free organic solar cells.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

A 15 nm Ultra‐thin Body SOI CMOS Device' with Double Raised Source/Drain for 90 nm Analog Applications

Fully‐depleted silicon‐on‐insulator (FD‐SOI) devices with a 15 nm SOI layer thickness and 60 nm gate lengths for analog applications have been investigated. The Si selective epitaxial growth (SEG) process was well optimized. Both the singleraised (SR) and double‐raised (DR) source/drain (S/D) processes have been studied to reduce parasitic series resistance and improve device performance. For the DR S/D process, the saturation currents of both NMOS and PMOS are improved by 8 and 18%, respectively, compared with the SR S/D process. The self‐heating effect is evaluated for both body contact and body floating SOI devices. The body contact transistor shows a reduced self‐heating ratio, compared with the body floating transistor. The static noise margin of an SOI device with a 1.1 µm² 6T‐SRAM cell is 190 mV, and the ring oscillator speed is improved by 25 % compared with bulk devices. The DR S/D process shows a higher open loop voltage gain than the SR S/D process. A 15 nm ultra‐thin body (UTB) SOI device with a DR S/D process shows the same level of noise characteristics at both the body contact and body floating transistors. Also, we observed that noise characteristics of a 15 nm UTB SOI device are comparable to those of bulk Si devices.     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.