Preparation of micron‐size monodispersed PS/P(St/MAA) microspheres by seeded dispersion polymerization

Uniform polystyrene (PSt) particles with the size of 1.9 μm were first prepared via dispersion polymerization, and then used as the seeds in a second‐stage dispersion copolymerization of styrene (St) and methacrylic acid (MAA) to produce carboxyl‐carrying microspheres. The PSt seed particles were swollen by monomer mixture of St and MAA, including an oil‐soluble initiator 2,2′‐azobisiso‐butyronitrile (AIBN), before polymerization. Finally, uniform PS/P(St/MAA) (polydispersity index, PDI = 1.02) microspheres with the size of 2.2 μm were obtained. The average particle size and size distribution of the final microspheres were investigated. MAA contents between 54 and 97 mg/g were detected from the PS/P(St/MAA) particles produced under different conditions. Dispersion medium has great influence on the kinetics of polymerization, due to its effect on the partitioning of monomers, solvents, and initiator in the particle phase, probably as well as on the conformation of the dispersion agent on the surface of the particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3586–3591, 2006     

On the in‐situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers     

Temperature-composition phase diagrams of binary blends of block copolymer and homopolymer

The temperature-composition phase diagrams for six pairs of diblock copolymer and homopolymer are presented, putting emphasis on the effects of block copolymer composition and the molecular weight of added homopolymers. For the study, two polystyrene-block-polyisoprene (SI diblock) copolymers having lamellar or spherical microdomains, a polystyrene-block-polybutadiene (SB diblock) copolymer having lamellar microdomains, and a series of polystyrene (PS), polyisoprene (PI), and polybutadiene (PB) were used to prepare SI/PS, SI/PI, SB/PS, and SB/PB binary blends, via solvent casting, over a wide range of compositions. The shape of temperature-composition phase diagram of block copolymer/homopolymer blend is greatly affected by a small change in the ratio of the molecular weight of added homopolymer to the molecular weight of corresponding block (M_H,A/M_C,A or M_H,B/M_C,B) when the block copolymer is highly asymmetric in composition but only moderately even for a large change in M_H,A/M_C,A ratio when the block copolymer is symmetric or nearly symmetric in composition. The boundary between the mesophase (M₁) of block copolymer and the homogeneous phase (H) of block copolymer/homopolymer blend was determined using oscillatory shear rheometry, and the boundary between the homogeneous phase (H) and two-phase liquid mixture (L₁+L₂) with L₁ being disordered block copolymer and L₂ being macrophase-separated homopolymer was determined using cloud point measurement. It is found that the addition of PI to a lamella-forming SI diblock copolymer or the addition of PB to a lamella-forming SB diblock copolymer gives rise to disordered micelles (DM) having no long-range order, while the addition of PS to a lamella-forming SB diblock copolymer retains lamellar microdomain structure until microdomains disappear completely. Thus, the phase diagram of SI/PI or SB/PB blends looks more complicated than that of SI/PS or SB/PS blends.     

A Novel Inorganic Polymer as Cathode Material for Secondary Lithium Batteries

Summary: This paper introduces a new inorganic poly(phosphazene disulfide) material. With unique element composition and molecular structure, the polymer has noncombustible safety and preferable conductivity. When used as cathode material for rechargeable lithium batteries, the polymer's first discharge capacity is as high as 467.9 mAh · g^?1, which can be retained at 409.9 mAh · g^?1 after 60 repeated cycles. Therefore, it has a great application potential in the field of lithium batteries.

Replacement of the Cl atoms by S? S groups by refluxing Na₂S₂ and linear poly(dichloro‐phosphazene).     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. II. Volume shrinkage characteristics and internal pigmentability

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride) with different chemical structures and MWs on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during curing were investigated by an integrated approach of static phase characteristics of the ternary styrene (ST)/UP/LPA system, reaction kinetics, cured‐sample morphology, microvoid formation, and property measurements. The relative volume fraction of microvoids generated during the cure was controlled by the stiffness of the UP resin used, the compatibility of the uncured ST/UP/LPA systems, and the glass‐transition temperature of the LPAs used. On the basis of the Takayanagi mechanical model, the LPA mechanism on volume shrinkage control, which accounted for phase separation and microvoid formation, and factors leading to both a good volume shrinkage control and acceptable internal pigmentability for the molded parts are discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3388–3397, 2004     

CO2‐assisted polymer processing: A new alternative for intractable polymers

CO₂‐assisted polymer processing is proposed as an alternative route for intractable and high molecular weight polymers based on the plasticization effects of CO₂ and its direct effect on the melting behavior of semicrystalline polymers. A modified processing system was used to process a variety of polymers in the presence of high‐pressure CO₂. The system includes an extruder that was modified to allow for high pressures created by the injection of CO₂. The new design includes a modified feed section that allows a given mass of polymer to interact with CO₂ before and during the extrusion process. The inherent shear mixing and the presence of CO₂ allow for a specific control over the extrudate morphology. Results suggest that this alternative design provides a new and easy route to melt process high melt viscosity polymers of commercial importance, such as polytetrafluoroethylene (PTFE), fluorinated ethylene propylene copolymer (FEP), and syndiotactic polystyrene (s‐PS). The increased processability of these systems in CO₂ is related to the plasticization effect of CO₂ that was quantified through a depression in the glass‐transition temperature according to the Chow model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1501–1511, 2004     

Properties of modified polyacrylonitrile membranes prepared by copolymerization with hydrophilic monomers for water–ethanol mixture separation

A new kind of terpolymer membrane was employed to separate a permselective water–alcohol mixture. This membrane was prepared via the copolymerization of acrylonitrile, sodium salt styrene sulfonic acid (SStSA), and hydroxyethyl methacrylate in dimethylsulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism, resultant structure, and polymer composition were confirmed by IR and elemental analysis. The effects of the feed composition on the polymer composition, mechanical properties, thermal properties, and degree of swelling were investigated. It was found that water permeated through the membrane preferentially in a water/alcohol system. The flux increased with the increase of SStSA, but the separation factor decreased drastically with higher SStSA. For a 50 wt % water–ethanol mixture, a flux of 0.65 kg/m² h and a separation factor of 212 were obtained at 30°C when the membrane containing the highest SStSA content was used. The capacities of the metal ions absorbed by the membranes were investigated in the study. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 244–250, 2003     

用弱酸树脂处理"负硬水"

用H+交换柱-脱气塔-Na+交换柱串联工艺处理"负硬水".H+柱采用浮动床,Na+柱采用固定床,树脂采用弱酸性交换树脂110.在满足硬度要求的同时,经处理后的水的碱度小于1.0 mmol/L,出水体积可高达H+柱树脂体积的260倍以上.实际运行结果表明,本工艺具有操作简便、出水稳定、水质良好等优点.     

Polymerization Catalysis in Liquid Propylene: High Activities and Molecular Weights in Propylene/CO Copolymerization Reactions

Summary: The dicationic [(dppp)Pd(NCCH₃)₂](BF₄)₂ catalyst (dppp = 1,3‐bis(diphenylphosphino)propane) was applied in a liquid monomer, two phase process for the CO/propene copolymerization reaction. For the first time it was possible to synthesize propene/CO copolymers with an activity up to 7 500 g/(mol · h) and molecular weights of 500 000 g/mol. Activities up to 40 000 g/(mol · h) could be obtained with the use of the unsymmetric catalyst [(CF₃‐dppp)Pd(NCCH₃)](BF₄)₂ (CF₃‐dppp = 1‐diphenylphosphino‐3‐bis[3,5‐di(trifluormethyl)phenyl]phosphinopropane) in homogeneous liquid propene solution.

Granules found after copolymerization.     

影响自由基聚合立体定向力的因素

在自由基聚合中,生成间规立构的趋势稍优先于等规立构。通常认为,碳碳双键上取代基的体积效应和极性效应,是加成反应的立体定向力;而作者则认为,极性呈静电排斥效应是决定间规立构含量较优的主要因素。取代基的体积效应具有两个因素同时决定着立体异构的形成,其一是热力学因素,即体积的排斥效应使间规立构含量增加;另一是动力学因素,即在加成反应瞬间影响链末端碳碳单键内旋转的自由度。因此,取代基的存在不仅使得间规立构占主导,而且取代基体积越小,则自由基的碳碳单键内旋转越容易,形成间规立构的比例亦越高;反之则内旋转不自由,形成随机取向(即无规立构)的比例增加。