Development of nano-composite lead-free electronic solders

Inert, hybrid inorganic/organic, nano-structured chemicals can be incorporated into low melting metallic materials, such as lead-free electronic solders, to achieve desired levels of service performance. The nano-structured materials technology of polyhedral oligomeric silsesquioxanes (POSS), with appropriate organic groups, can produce suitable means to promote bonding between nano-reinforcements and the metallic matrix. The microstructures of lead-free solder reinforced with surface-active POSS tri-silanols were evaluated using scanning electron microscopy (SEM). Wettability of POSS-containing lead-free solders to copper substrate was also examined. Steady-state deformation of solder joints made of eutectic Sn-Ag solder containing varying weight fractions of POSS of different chemical moieties were evaluated at different temperatures (25°C, 100°C, and 150°C) using a rheometric solids analyzer (RSA-III). Mechanical properties such as shear stress versus simple shear-strain relationships, peak shear stress as a function of rate of simple shear strain, and testing temperature for such nano-composite solders are reported. The service reliability of joints made with these newly formulated nano-composite solders was evaluated using a realistic thermomechanical fatigue (TMF) test profile. Evolution of microstructures and residual mechanical property after different extents of TMF cycles were evaluated and compared with joints made of standard, unreinforced eutectic Sn-Ag solder.     

ZBP: A Zone-Based Broadcasting Protocol for Wireless Sensor Networks

Wireless Sensor Networks (WSNs) have been widely used in motoring and collecting interests of environment information. Packet flooding or broadcasting is an essential function for establishing a communication path from sink node to a region of sensor nodes. However, flooding operation consumes power and bandwidth resources and raises the packet collision and contention problems, which reduce the success rate of packet transmissions and consume energy. This article proposes an efficient broadcasting protocol to reduce the number of sensor nodes that forward the query request, hence improves the packet delivery rate and saves bandwidth and power consumptions. Sensor node that received the query request will dynamically transfers the coordinate system according to the zone-ID of source node and determines whether it would forward the request or not in a distributed manner. Compared with the CBM and traditional flooding operation, experimental results show that the proposed zone-based broadcasting protocol decreases the bandwidth and power consumptions, reduces the packet collisions, and achieves high success rate of packet broadcasting.Chih-Yung Chang received the Ph.D. degree in Computer Science and Information Engineering from National Central University, Taiwan, in 1995. He joined the faculty of the Department of Computer and Information Science at Aletheia University, Taiwan, as an Assistant Professor in 1997. He was the Chair of the Department of Computer and Information Science, Aletheia University, from August 2000 to July 2002. He is currently an Associate Professor of Department of Computer Science and Information Engineering at Tamkang University, Taiwan. Dr. Chang served as an Associate Guest Editor of Journal of Internet Technology (JIT), Special Issue on “Wireless Ad Hoc and Sensor Networks” (2004) and a member of Editorial Board of Tamsui Oxford Journal of Mathematical Sciences (2001–2005). He was an Area Chair of IEEE AINA′2005, Vice Chair of IEEE WisCom2005, Track Chair (Learning Technology in Education Track) of IEEE ITRE′2005, Program Co-Chair of MNSA′2005, Workshop Co-Chair of INA′2005, MSEAT′2003, MSEAT′2004, Publication Chair of MSEAT′2005, and the Program Committee Member of ICPP′2004, USW′2005, WASN′2005, and the 11th Mobile Computing Workshop. Dr. Chang is a member of the IEEE Computer Society and IEICE society. His current research interests include wireless sensor networks, mobile learning, Bluetooth radio systems, Ad Hoc wireless networks, and mobile computing.Kuei-Ping Shih received the B.S. degree in Mathematics from Fu-Jen Catholic University, Taiwan, Republic of China, in June 1991 and the Ph.D. degree in Computer Science and Information Engineering from National Central University, Taiwan, Republic of China, in June 1998. After two years of military obligation, he joined the faculty of the Department of Computer Science and Information Engineering, Tamkang University, Taiwan, Republic of China, as an assistant professor in 2000. Dr. Shih served as a Program Area Chair in the IEEE International Conference on Advanced Information Networking and Applications (AINA), 2005, and as a Technical Track Chair in the IEEE International Conference on Information Technology: Research and Education (ITRE), 2005. Dr. Shih’s current research interests include wireless networks, sensor networks, mobile computing, and network protocols design.Dr. Shih is a member of the IEEE Computer and Communication Societies and Phi Tau Phi Scholastic Honor Society.Shih-Chieh Lee received the B.S. degree in Computer Science and Information Engineering from Tamkang University, Taiwan, in 1997. Since 2003 he has been a Ph.D. Students in Department of Computer Science and Information Engineering, Tamkang University. His research interests are wireless sensor networks, Ad Hoc wireless networks, and mobile/wireless computing.     

Robust iterative tree-pruning detection and LDPCC decoding

A novel suboptimal low-complexity equalization and turbo-iterative decoding scheme is proposed in this paper. The scheme is developed for multiple transmit- and multiple receive-antenna systems operating over severe frequency-selective fading intersymbol interference channels. The signal-processing complexity may be of a concern for such systems. The complexity of a full-search equalization grows in a power-law manner O(M/sup NtL/), where M denotes for M-ary channel symbols, N/sub t/ the number of transmit-antennas, and L the number of delay channel taps. A low-complexity solution can be obtained by pruning an equalizer tree. The two main operations include a sphere list detection and a threshold-based tree-search. In the operation of extracting extrinsic messages from the pruned tree, a set of explored paths with different survival lengths poses a fairness problem: a longer-lived path naturally builds a larger discrepancy-metric than a shorter lived path does. A novel survival-length compensation-rule is devised so that all explored paths with different survival lengths are utilized fairly in generating the output message. Simulation results are obtained for multi-input and multi-output systems equipped with four transmit and four receive antennas. They indicate the performance of the receiver is very robust.     

Design and Architecture of Low‐Latency High‐Speed Turbo Decoders

In this paper, we propose and present implementation results of a high‐speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix‐4, center to top, parallel decoding, and early‐stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real‐time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix‐4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field‐programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.     

Comparative study on the mutual coupling between different sized cylindrical dielectric resonators antennas and circular microstrip patch antennas

A systematic comparative study on the mutual coupling (S/sub 21/) between dielectric resonator antennas (DRAs) and microstrip patch antennas is presented. The mutual coupling between two cylindrical probe-fed DRAs is studied for different radius to height (a/L) ratios. It is found that the mutual coupling decreases with the radius to height ratio. Comparison between mutual coupling of probe-fed cylindrical DRAs and circular microstrip patch antennas with different dielectric substrates are also studied. The mutual coupling between DRAs is 2 dB stronger than between microstrip patch antennas when the patch is etched on a dielectric substrate of a dielectric constant close to the permittivity of the DRA. The mutual coupling of the circular patch antennas reduces with the dielectric constant of the substrate.     

Bendable and Splitter-Integrated Optical Subassembly Based on a Flexible Optical Board

A bendable and splitter-integrated optical subassembly (OSA) is suggested as a short-distance board-to-board optical interconnection. This OSA was fabricated by simply packaging a vertical-cavity surface-emitting laser on a flexible optical board having an embedded 1 $times$ 8 optical splitter waveguide. Finally, we measured various optical characteristics of the OSA, including insertion, twist, and bending losses.      

A 12 b 8 kS/s 16 μW 0.35 μm CMOS algorithmic ADC for sensor interface in ubiquitous environments

This work proposes a 12 b 8 kS/s ultra-low-power CMOS algorithmic analog-to-digital converter (ADC) for sensor interface applications such as accelerometers and gyro sensors requiring high-resolution, low-power, and small size simultaneously. The proposed ADC employs switched-bias power reduction and bias sharing circuits to minimize chip area and power dissipation. A signal-insensitive all directionally symmetric layout technique based on a double-poly CMOS process reduces capacitor mismatch in the multiplying D/A converter for 12 b-level high accuracy without additional conventional calibration schemes. Two independently generated currents with the same negative temperature coefficient are subtracted from each other to implement temperature- and supply-insensitive current and voltage references on-chip. The prototype ADC in a 0.35 μm 2P4M CMOS technology demonstrates a measured differential non-linearity and integral non-linearity within 0.15 and 0.56 LSB at 12 b and shows a maximum signal-to-noise-and-distortion ratio and spurious-free dynamic range of 68 and 77 dB at 8 kS/s, respectively. The ADC with an active die area of 0.70 mm² consumes 16 μW at 8 kS/s and 2.5 V.     

Contention aware mobility prediction routing for intermittently connected mobile networks

This paper introduces a novel multi-copy routing protocol, called predict and forward (PF), for delay tolerant networks, which aims to explore the possibility of using mobile nodes as message carriers for end-to-end delivery of the messages. With PF, the message forwarding decision is made by manipulating the probability distribution of future inter-contact and contact durations based on the network status, including wireless link condition and nodal buffer availability. In particular, PF is based on the observations that the node mobility behavior is semi-deterministic and could be predicted once there is sufficient mobility history information. We implemented the proposed protocol and compared it with a number of existing encounter-based routing approaches in terms of delivery delay, delivery ratio, and the number of transmissions required for message delivery. The simulation results show that PF outperforms all the counterpart multi-copy encounter-based routing protocols considered in the study.     

Development and Simulation of Sulfur‐doped Graphene Supported Platinum with Exemplary Stability and Activity Towards Oxygen Reduction

Sulfur‐doped graphene (SG) is prepared by a thermal shock/quench anneal process and investigated as a unique Pt nanoparticle support (Pt/SG) for the oxygen reduction reaction (ORR). Particularly, SG is found to induce highly favorable catalyst‐support interactions, resulting in excellent half‐cell based ORR activity of 139 mA mg_Pt ^?1 at 0.9 V vs RHE, significant improvements over commercial Pt/C (121 mA mg_Pt ^?1) and Pt‐graphene (Pt/G, 101 mA mg_Pt ^?1). Pt/SG also demonstrates unprecedented stability, maintaining 87% of its electrochemically active surface area following accelerated degradation testing. Furthermore, a majority of ORR activity is maintained, providing 108 mA mg_Pt ^?1, a remarkable 171% improvement over Pt/C (39.8 mA mg_Pt ^?1) and an 89% improvement over Pt/G (57.0 mA mg_Pt ^?1). Computational simulations highlight that the interactions between Pt and graphene are enhanced significantly by sulfur doping, leading to a tethering effect that can explain the outstanding electrochemical stability. Furthermore, sulfur dopants result in a downshift of the platinum d‐band center, explaining the excellent ORR activity and rendering SG as a new and highly promising class of catalyst supports for electrochemical energy technologies such as fuel cells.