某水电站厂房洞室群围岩点荷载强度试验成果分析及利用研究

通过厂房地下洞室群围岩点荷载试验,获得了洞室不同深度位置岩石点荷载强度值,试验发现各平洞点荷载强度随洞室深度变化呈现明显的波动性变化特征。研究表明,围岩岩性、断层以及岩石微观结构等是影响岩石点荷载强度的主要因素。其中,围岩中普遍发育的矿物定向排列是导致点荷载强度波动性变化的最主要因素。最后,通过与实测单轴抗压强度比较,得出当岩石单轴抗压强度大于60 MPa时,宜采用成都理工大学推荐公式换算单轴抗压强度,当单轴抗压强度小于60 MPa时,宜采用水利水电规范推荐的转换公式计算岩石单轴抗压强度。     

基于马尔可夫链的自适应性神经网络训练算法

提出一种基于马尔可夫链的自适应性神经网络训练方法,对传统的S型激励函数进行了改进,建立了自适应性的神经网络分类器。在假设样本中噪声服从于正态分布的情况下建立最大似然估计,通过后验概率建立马尔科夫链对样本进行训练,提高了神经网络训练速度。在轴承故障诊断中的测试结果表明,该算法可以迅速稳定地训练出神经网络,有效提高诊断的分类结果。     

Wet oxidation of wastewater containing hydrocarbons by novel supported Pd catalysts

Pd catalysts supported on TiO₂, ZrO₂, ZSM-5, MCM-41 and activated carbon were used in catalytic wet oxidation of hydrocarbons such as phenol, m-cresol and m-xylene. It was found that the Pd/TiO₂ catalyst was highly effective in the wet oxidation of hydrocarbon. The activities of catalysts with various hydrocarbon species, catalyst support, oxidation state of catalyst performed in a 3-phase slurry reactor show that reaction on Pd surface is more favorable than that in aqueous phase and that the active site is oxidized Pd in catalytic wet air oxidation of hydrocarbons. Based on the experimental results, a plausible reaction mechanism of wet oxidation of hydrocarbons catalyzed over Pd/TiO₂ catalyst was proposed. This catalyst is superior to other oxide catalysts because it suppressed the formation of hardly-degradable organic intermediates and polymer.     

Decane reforming reaction over Pt,Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite

Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on NaY- and HY-zeolite were examined as a catalyst for producing gasoline from n-decane via simultaneous reforming and cracking. The catalysts were prepared by calcining and reducing metal-ion-exchanged Y-zeolite with O₂ and H₂ at 300°C., respectively. Thus prepared catalysts were characterized by hydrogen chemisorption and temperature programmed desorption of ammonia. Pt-Ni/NaY and Pt-Ir/NaY bimetallic catalysts offered the improved activity maintenance compared to Pt/NaY monometallic catalyst. The catalysts supported on HY-zeolite showed higher selectivity toward C₅–C₇ and skeletal isomers of C₅–C₇- and C₈–C₁₀ than those of the catalysts supported on NaY-zeolite, which is a desired characteristic for increasing octane value of gasoline these days. However, deactivation with reaction time was much more pronounced on HY-zeolite-supported catalyst. When the catalyst was prcsulfided with H,S, the stability with time on stream was enhanced and the selectivity was quite different from that of the catalyst before presulfiding. The acidity of Y-zeolite and presulfiding of catalyst greatly influenced the activny, selectivity and stability of Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite in n-decane reforming reaction.     

Performance of fluorine-added CoMoS/Al2O3 prepared by sonochemical and chemical vapor deposition methods in the hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

The performance of a new type of CoMoS/Al₂O₃ catalyst, with added fluorine and prepared by sonochemical and chemical vapor deposition (CVD) methods, was investigated in the hydrodesulfurization (HDS) of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The catalyst, which was designed to contain optimum amounts of fluorine and cobalt, exhibited a higher activity, ca. 4.6 times higher activity particularly in the HDS of 4,6-DMDBT, than a fluorine-free catalyst prepared by a conventional impregnation method. The enhanced activity of the new catalyst can be attributed to the cumulative effects of individual factors involved in the catalyst preparation. That is, the use of a sonochemical synthesis led to a high dispersion of small MoS₂ crystallites on the alumina, and the addition of the Co species to the catalyst by CVD caused a close interaction between the Co species and the MoS₂ crystallites to produce numerous CoMoS species, which are the catalytically active species for HDS. The addition of fluorine increased the amounts of acidic sites in the catalyst, which promoted hydrogenation (HYD) route to a greater extent than the direct desulfurization (DDS) route in DBT HDS and both HYD and DDS routes to similar extents in the case of 4,6-DMDBT HDS. Accordingly, the addition of fluorine led to a greater increase in catalytic activity for 4,6-DMDBT HDS than for DBT HDS.     

Dependence of properties of liquid crystalline aromatic copolyesters on monomer sequence-copolyesters derived from terephthalic acid, 2,7-naphthalenediol and p-hydroxybenzoic acid

Summary An aromatic copolyester with the ordered sequence of terephthalic acid (TA)-p-hydroxybenzoic acid (HB)-2,7-naphthalenediol (ND)-p-hydroxybenzoic acid (HB) was prepared and its properties were compared with those of the corresponding random copolyester having the same overall monomer composition. Thermal and crystallizing properties of the two polymers are quite different. The former exhibits significantly higher glass transition and melting temperatures than the latter. The former's degree of crystallinity also is much higher than the latter's. Both polymers are thermotropic and form nematic melts.     

A new parallel algorithm for vertex priorities of data flow acyclic digraphs

Data flow acyclic directed graphs (digraph) are widely used to describe the data dependency of mesh-based scientific computing. The parallel execution of such digraphs can approximately depict the flowchart of parallel computing. During the period of parallel execution, vertex priorities are key performance factors. This paper firstly takes the distributed digraph and its resource-constrained parallel scheduling as the vertex priorities model, and then presents a new parallel algorithm for the solution of vertex priorities using the well-known technique of forward–backward iterations. Especially, in each iteration, a more efficient vertex ranking strategy is proposed. In the case of simple digraphs, both theoretical analysis and benchmarks show that the vertex priorities produced by such an algorithm will make the digraph scheduling time converge non-increasingly with the number of iterations. In other cases of non-simple digraphs, benchmarks also show that the new algorithm is superior to many traditional approaches. Embedding the new algorithm into the heuristic framework for the parallel sweeping solution of neutron transport applications, the new vertex priorities improve the performance by 20 % or so while the number of processors scales up from 32 to 2048.     

A power spectrum optimization algorithm inspired by magnetotactic bacteria

Magnetotactic bacteria (MTB) are one kind of bacteria with magnetic particles called magnetosomes in their bodies. These particles often connect together like a chain. The MTB move toward the ideal living conditions under the interaction between magnetic field produced by the magnetic particles chain and that of the earth. In the paper, a new magnetic bacteria algorithm based on power spectrum (PSMBA) for optimization is proposed. The candidate solutions are decided by power spectrum in the algorithm. It mainly includes four steps: power spectrum calculation, bacteria swimming, bacteria rotation and bacteria replacement. The effect of swimming schemes and parameter settings on the performance of PSMBA is studied. And it is compared with GA, PSO and its variants and some other optimization algorithms on 25 benchmark functions including CEC2005. The simulation results show that PSMBA has better performance on most of the problems than most of the compared algorithms.     

Contraction stress build‐up of anisotropic conductive films (ACFs) for flip‐chip interconnection: Effect of thermal and mechanical properties of ACFs

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after the curing and cooling processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermomechanical properties of ACFs were investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermomechanical properties were experimentally investigated with thermomechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction were estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass‐transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicate that the electrical conduction of ACF joint is robustly maintained by substantial contraction stress below T_g. The increasing rate of contraction stresses below T_g was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E × CTE reveals that the build‐up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T_g. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2634–2641, 2004     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002