A study of roll‐printing technology for TFT‐LCD fabrication

Abstract— Recently, potential breakthrough technologies for low‐cost processing of TFT‐LCDs and new process developments for flexible‐display fabrication have been widely studied. A roll‐printing process using etch‐resist material as a replacement for photolithographic patterning was investigated. The characterization of the properties of patterns formed in roll printing, a method to fabricate cliché plates for fine patterns, and the design of a new formulation for resist printing ink is reported. The pattern position accuracy, which is one of the most important issues for the successful application of printing processes in display manufacturing was studied and how it can be improved by optimizing the blanket roll structure is explained. New design rules for the layout of the thin‐film‐transistor array was derived to improve the compatibility of roll printing. As a result, a prototype 15‐in.‐XGA TFT‐LCD panel was fabricated by using printing processes to replace all the photolithographic patterning steps conventionally used.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Inductive semimodules and the vector modules over them

The notion of an inductive semimodule over an ordered *-semiring is introduced and some related properties are investigated. Inductive semimodules are extensions of several important algebraic structures such as Kleene modules, Kleene algebras and inductive *-semirings. We prove that an inductive semimodule over an ordered *-semiring K is a Kleene module if and only if K is a Kleene algebra. Moreover, we establish that the vector module of an inductive semimodule over an ordered Conway semiring is again an inductive semimodule over the matrix semiring. Consequently, in an inductive semimodule over an ordered Conway semiring, least solutions to linear inequation systems can be denoted by linear expressions, avoiding the least fixed point operator. In addition, we also introduce a related notion called weak inductive semimodules, and propose several open problems on them.

Adaptive IIR/FIR fusion filter and its application to the INS/GPS integrated system

Motivated by the complementary features of the IIR-type filter and the FIR-type filter, this paper proposes a robust IIR/FIR fusion filter and an INS/GPS integrated system designed with the fusion filter. In the fusion filter, an IIR-type filter (SPKF) and a FIR-type filter (MRHKF filter) are processed independently, and then the two filters are merged using the mixing probability calculated using the residuals and residual covariance information of the two filters. The merits of the SPKF and the MRHKF filter are integrated and the demerits of the filters are diminished through the filter fusion. Consequently, the proposed fusion filter shows robustness against model uncertainty, temporary disturbing noise, large initial estimation error, etc. The stability of the fusion filter is verified by showing the closeness of two filters in the mixing/redistribution process and the upper bound of the error covariance matrices. This fusion filter is applied to an INS/GPS integrated system. The performance of the INS/GPS integrated system designed using the fusion filter is verified through a simulation under various error environments and is experimentally confirmed.     

Matrix method to study IEEE 802.11 network

In this paper, we estimate characteristics of the IEEE 802.11 DCF (Distributed Coordination Function) in non-saturation mode. We take into account two significant features inherent to the non-saturated 802.11 DCF: (i) the possibility of asynchronous transmission performed without preceding backoff for the first packet arriving at the idle staion; and (ii) so-called post backoff meaning that a station must perform a backoff once after any of its transmissions even if its queue becomes empty. We derive the probability generating function (PGF) of Head-of-Line delay (HoL-delay). Our method to find PGF of HoL-delay is quite intuitive and straightforward. Also, we obtain the packet loss probability and non-saturation throughput. Numerical results show that these two features inherent to the non-saturated 802.11 DCF influence on the performance measures of DCF such as delay considerably and it should be taken into account for accurate modeling of DCF.     

Effect of deposition temperature on dielectric properties of PECVD Ta2O5 thin film

Tantalum oxide film formation by plasma-enhanced chemical vapour deposition (PECVD) using TaCl₅ as a source material was examined. The effects of deposition temperature on the formation, structure and electric properties of the Ta₂O₅ film were investigated for Al/Ta₂O₅/ p-Si (MTS) capacitors. The deposition rate and refractive index increased with increasing deposition temperature. It was found that the structure of Ta₂O₅ deposited by PECVD was amorphous as-deposited. However, crystalline -Ta₂O₅ of hexagonal structure was formed by a 700 °C, 1 h heat treatment in argon. Capacitance and relative dielectric constant of the PECVD Ta₂O₅ were found to be 2.54 fF m^–2 and 23.5, respectively. The PECVD films obtained in this study have higher dielectric constants and remarkably better general film characteristics than those obtained by other deposition methods.     

Mucoadhesive Phenolic Pectin Hydrogels for Saliva Substitute and Oral Patch

Oral disease is one of the most common conditions worldwide, negatively affecting general health, reducing the quality of life, and often developing into systemic illness. However, the design of therapeutic agents for oral diseases is challenging due to various unique features of the oral cavity, including its wet and dynamic environment and curved shape. Herein, the development of highly biocompatible mucoadhesive functional hydrogels for oral applications is reported, generated by introducing bio-inspired phenolic moieties into a pectin polymer. Pyrogallol-functionalized pectin (Pec-PG) can be crosslinked in situ via autoxidation without chemical agents and readily fabricated as various formulations. Sprayable Pec-PG hydrogel exhibits strong mucoadhesion and outstanding hydration ability ex vivo and in vivo, thus displaying significant potential as a novel saliva substitute for dry mouth. The authors further show that topical application of mucoadhesive Pec-PG patches pre-loaded with corticosteroid significantly promotes the repair of diabetic oral ulcer tissue via prolonged drug release, free radical scavenging, and physical barrier effects. Moreover, similar applications for oral ulcer treatment using a pectin hydrogel modified with catechol (Pec-CA), another phenolic moiety are demonstrated. Together, these findings suggest that mucoadhesive phenolic pectin derivatives can provide highly biocompatible, convenient, and effective hydrogel platforms for treating oral diseases.     

Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Implementation of mmWave long-range backhaul for UAV-BS

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.     

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.