Low level light therapy by Red–Green–Blue LEDs improves healing in an excision model of Sprague–Dawley rats

There are many methods of healing wounds. Among these, light therapy is reported to be beneficial, as beams assist the human body in treating, sterilizing, and regenerating cells. Both Laser and LED irradiation with specific wavelengths induce proliferation of fibroblasts depending on the wound area or wavelength and are effective in wound healing. This study used 8-week-old 250–300 g Male Sprague–Dawley Rats (ILAR Code: NTacSam:SD). The experiment was carried out for the non-irradiation group and the Red–Green–Blue LEDs irradiation groups (n of each group = 5). The experiment animals were relieved for 24 h after wounds had been excised and then the Red–Green–Blue LEDs irradiation groups were given irradiation therapy over 9 days 1 h per day. Immunohistochemical staining was conducted for cytokeratin in order to precisely measure the defect size. Also, Masson’s trichrome staining was conducted for comparison of collagen between the Red–Green–Blue LEDs irradiation groups and the non-irradiation group. Animals treated with Blue LEDs irradiation (p < 0.05), Green LEDs irradiation (p < 0.05), and Red LEDs irradiation (N.S.) healed at a faster rate than non-irradiated group. The LEDs irradiated groups also had more collagen, according to Masson’s trichrome staining for collagen analysis. The Red–Green–Blue LEDs irradiation had a beneficial effect on wound healing and could probably replace low power laser treatment.     

A study of roll‐printing technology for TFT‐LCD fabrication

Abstract— Recently, potential breakthrough technologies for low‐cost processing of TFT‐LCDs and new process developments for flexible‐display fabrication have been widely studied. A roll‐printing process using etch‐resist material as a replacement for photolithographic patterning was investigated. The characterization of the properties of patterns formed in roll printing, a method to fabricate cliché plates for fine patterns, and the design of a new formulation for resist printing ink is reported. The pattern position accuracy, which is one of the most important issues for the successful application of printing processes in display manufacturing was studied and how it can be improved by optimizing the blanket roll structure is explained. New design rules for the layout of the thin‐film‐transistor array was derived to improve the compatibility of roll printing. As a result, a prototype 15‐in.‐XGA TFT‐LCD panel was fabricated by using printing processes to replace all the photolithographic patterning steps conventionally used.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Multibody dynamics analysis of the driveshaft coupling of the ball and tripod types of constant velocity joints

The paper proposes a multibody dynamic simulation to numerically evaluate the generated axial force (GAF) and plunging resistant force (PRF) practically related to the shudder and idling vibration of an automobile. A numerical analysis of the drive shaft coupling of a ball joint (BJ) and two plunging type joints, a tripod joint (TJ), and a very low axial force tripod joint (VTJ), are conducted using the commercial program DAFUL. User-defined subroutines of a friction model illustrating the contacted parts of the outboard and inboard joint are subsequently developed to overcome the numerical instability and improve the solution performance. The Coulomb friction effect is applied to describe the contact models of the lubricated parts in the rolling and sliding mechanisms. The numerical results, in accordance with the joint articulation angle variation, are validated with experimentation. The offset between spider and housing is demonstrated to be the critical role in producing the third order component of the axial force that potentially causes the noise and vibration in the vehicle. The VTJ shows an excellent behavior for the shudder when compared with the TJ. In addition, a flexible nonlinear contact analysis coupled with multibody dynamics is also performed to show the dynamic strength characteristics of the rollers, housing, and spider.     

Inductive semimodules and the vector modules over them

The notion of an inductive semimodule over an ordered *-semiring is introduced and some related properties are investigated. Inductive semimodules are extensions of several important algebraic structures such as Kleene modules, Kleene algebras and inductive *-semirings. We prove that an inductive semimodule over an ordered *-semiring K is a Kleene module if and only if K is a Kleene algebra. Moreover, we establish that the vector module of an inductive semimodule over an ordered Conway semiring is again an inductive semimodule over the matrix semiring. Consequently, in an inductive semimodule over an ordered Conway semiring, least solutions to linear inequation systems can be denoted by linear expressions, avoiding the least fixed point operator. In addition, we also introduce a related notion called weak inductive semimodules, and propose several open problems on them.

Adaptive IIR/FIR fusion filter and its application to the INS/GPS integrated system

Motivated by the complementary features of the IIR-type filter and the FIR-type filter, this paper proposes a robust IIR/FIR fusion filter and an INS/GPS integrated system designed with the fusion filter. In the fusion filter, an IIR-type filter (SPKF) and a FIR-type filter (MRHKF filter) are processed independently, and then the two filters are merged using the mixing probability calculated using the residuals and residual covariance information of the two filters. The merits of the SPKF and the MRHKF filter are integrated and the demerits of the filters are diminished through the filter fusion. Consequently, the proposed fusion filter shows robustness against model uncertainty, temporary disturbing noise, large initial estimation error, etc. The stability of the fusion filter is verified by showing the closeness of two filters in the mixing/redistribution process and the upper bound of the error covariance matrices. This fusion filter is applied to an INS/GPS integrated system. The performance of the INS/GPS integrated system designed using the fusion filter is verified through a simulation under various error environments and is experimentally confirmed.     

Matrix method to study IEEE 802.11 network

In this paper, we estimate characteristics of the IEEE 802.11 DCF (Distributed Coordination Function) in non-saturation mode. We take into account two significant features inherent to the non-saturated 802.11 DCF: (i) the possibility of asynchronous transmission performed without preceding backoff for the first packet arriving at the idle staion; and (ii) so-called post backoff meaning that a station must perform a backoff once after any of its transmissions even if its queue becomes empty. We derive the probability generating function (PGF) of Head-of-Line delay (HoL-delay). Our method to find PGF of HoL-delay is quite intuitive and straightforward. Also, we obtain the packet loss probability and non-saturation throughput. Numerical results show that these two features inherent to the non-saturated 802.11 DCF influence on the performance measures of DCF such as delay considerably and it should be taken into account for accurate modeling of DCF.     

Effect of deposition temperature on dielectric properties of PECVD Ta2O5 thin film

Tantalum oxide film formation by plasma-enhanced chemical vapour deposition (PECVD) using TaCl₅ as a source material was examined. The effects of deposition temperature on the formation, structure and electric properties of the Ta₂O₅ film were investigated for Al/Ta₂O₅/ p-Si (MTS) capacitors. The deposition rate and refractive index increased with increasing deposition temperature. It was found that the structure of Ta₂O₅ deposited by PECVD was amorphous as-deposited. However, crystalline -Ta₂O₅ of hexagonal structure was formed by a 700 °C, 1 h heat treatment in argon. Capacitance and relative dielectric constant of the PECVD Ta₂O₅ were found to be 2.54 fF m^–2 and 23.5, respectively. The PECVD films obtained in this study have higher dielectric constants and remarkably better general film characteristics than those obtained by other deposition methods.     

Mucoadhesive Phenolic Pectin Hydrogels for Saliva Substitute and Oral Patch

Oral disease is one of the most common conditions worldwide, negatively affecting general health, reducing the quality of life, and often developing into systemic illness. However, the design of therapeutic agents for oral diseases is challenging due to various unique features of the oral cavity, including its wet and dynamic environment and curved shape. Herein, the development of highly biocompatible mucoadhesive functional hydrogels for oral applications is reported, generated by introducing bio-inspired phenolic moieties into a pectin polymer. Pyrogallol-functionalized pectin (Pec-PG) can be crosslinked in situ via autoxidation without chemical agents and readily fabricated as various formulations. Sprayable Pec-PG hydrogel exhibits strong mucoadhesion and outstanding hydration ability ex vivo and in vivo, thus displaying significant potential as a novel saliva substitute for dry mouth. The authors further show that topical application of mucoadhesive Pec-PG patches pre-loaded with corticosteroid significantly promotes the repair of diabetic oral ulcer tissue via prolonged drug release, free radical scavenging, and physical barrier effects. Moreover, similar applications for oral ulcer treatment using a pectin hydrogel modified with catechol (Pec-CA), another phenolic moiety are demonstrated. Together, these findings suggest that mucoadhesive phenolic pectin derivatives can provide highly biocompatible, convenient, and effective hydrogel platforms for treating oral diseases.     

Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.