A step-and-repeat UV-nanoimprint lithography process using an elementwise patterned stamp

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising cost-effective method for defining nanoscale structures at room temperature and low pressure. To apply a large-area stamp to a high throughput step-and-repeat process at atmospheric conditions, we proposed a new UV-NIL process that uses an elementwise patterned stamp (EPS), which consists of elements separated by channels, and additive gas pressurization. The proposed UV-NIL process required just four imprints to press an 8-in. wafer. EPS features measuring 50-80 nm were successfully transferred onto the wafers. The experiments demonstrated that a 5 × 5-in.² EPS could be used with a step-and-repeat UV-NIL process to imprint 8-in. wafers under atmospheric conditions.     

Simple Synthesis of Hollow Tin Dioxide Microspheres and Their Application to Lithium‐Ion Battery Anodes

Hollow tin dioxide (SnO₂) microspheres were synthesized by the simple heat treatment of a mixture composed of tin(IV ) tetrachloride pentahydrate (SnCl₄·5H₂O) and resorcinol–formaldehyde gel (RF gel). Because hollow structures were formed during the heat treatment, the pre‐formation of template and the adsorption of target precursor on template are unnecessary in the current method, leading to simplified synthetic procedures and facilitating mass production. Field‐emission scanning electron microscopy (FE‐SEM) images showed 1.7–2.5 μm sized hollow spherical particles. Transmission electron microscopy (TEM) images showed that the produced spherical particles are composed of a hollow inner cavity and thin outer shell. When the hollow SnO₂ microspheres were used as a lithium‐battery anode, they exhibited extraordinarily high discharge capacities and coulombic efficiency. The reported synthetic procedure is straightforward and inexpensive, and consequently can be readily adopted to produce large quantities of hollow SnO₂ microspheres. This straightforward approach can be extended for the synthesis of other hollow microspheres including those obtained from ZrO₂ and ZrO₂/CeO₂ solid solutions.     

Performance of a turbo‐coded CDMA system in a mobile satellite channel

The bit error rate (BER) performance of a turbo‐coded code‐division multiple‐access (CDMA) system operating in a satellite channel is analysed and simulated. The system performance is compared for various constituent decoders, including maximum a posteriori probability (MAP) and Max‐Log‐MAP algorithms, and the soft‐output Viterbi algorithm. The simulation results indicate that the Max‐Log‐MAP algorithm is the most promising among these three algorithms in overall terms of performance and complexity. It is also shown that, for fixed code rate, the BER performance is improved substantially by increasing the number of iterations in the turbo decoder, or by increasing the interleaver length in the turbo encoder. The results in this paper are of interest in CDMA‐based satellite communications applications. Copyright © 2005 John Wiley & Sons, Ltd.     

Laser Process Proximity Correction for Improvement of Critical Dimension Linearity on a Photomask

We report on the improvement of critical dimension (CD) linearity on a photomask by applying the concept of process proximity correction to a laser lithographic process used for the fabrication of photomasks. Rule‐based laser process proximity correction (LPC) was performed using an automated optical proximity correction tool and we obtained dramatic improvement of CD linearity on a photomask. A study on model‐based LPC was executed using a two‐Gaussian kernel function and we extracted model parameters for the laser lithographic process by fitting the model‐predicted CD linearity data with measured ones. Model‐predicted bias values of isolated space (I/S), arrayed contact (A/C) and isolated contact (I/C) were in good agreement with those obtained by the nonlinear curve‐fitting method used for the rule‐based LPC.     

Computational Implementation of Asymmetric Integral Imaging by Use of Two Crossed Lenticular Sheets

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three‐dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one‐dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.     

Microstructure,shear strength,and nanoindentation property of electroplated Sn–Bi micro-bumps

In order to investigate the microstructure and mechanical properties of small sized Sn–Bi bump, the eutectic Sn–Bi bumps with a diameter of 25 μm and a height of less than 20 μm after reflow were fabricated by electroplating and reflow. The reflow temperature of the Sn–Bi bumps was 170 °C, and the reflow times were varied from 5 to 20 min. The experimental results showed that a eutectic Sn–Bi composition was obtained by plating at a current density of 30 mA/cm² for 15 min. The average height and diameter of the bumps reflowed for 5 min were 16.1 ± 0.7 μm and 25.2 ± 0.7 μm, respectively. The microstructure of the reflowed bumps consisted of Sn- and Bi-rich phases. The thickness of the IMC of Cu₆Sn₅ increased from 1.17 to 2.25 μm with increasing reflow time from 5 to 20 min. The shear strength of the reflowed Sn–Bi bump increased with increasing reflow time, and reached approximately 11 gf at 15 and 20 min. The elastic modulus and hardness of eutectic Sn–Bi bump by nanoindentation were 53.5 and 0.43 GPa. Those of Cu₆Sn₅ were found to be 121.1 and 6.67 GPa.     

Can smartphones be specialists? Effects of specialization in mobile advertising

Based on the Computers Are Social Actors (CASA) paradigm, this study extends the expectations regarding the superiority of specialists over generalists to mobile technology by examining whether the specialization of a hardware agent (i.e., a smartphone) and a software agent (i.e., an application) has psychological effects on smartphone users who are exposed to mobile advertisements. Results from a between-subjects experiment (N = 80) show that specialist smartphones and applications induce greater trust in advertisements and an increased purchase intention toward the advertised products than generalist smartphones and applications. In addition, the effects of specialization on purchase intention are mediated by trust in advertisements. Theoretical and practical implications of these findings are discussed.     

Extraction of interface states at emitter–base heterojunctions in AlGaAs/GaAs heterostructure bipolar transistors using sub-bandgap photonic excitation

Distribution of interface states at the emitter–base heterojunctions in heterostructure bipolar transistors (HBTs) is characterized by using current–voltage characteristics using sub-bandgap photonic excitation. Sub-bandgap photonic source with a photon energy E_ph which is less than the energy bandgap E_g (E_g,GaAs = 1.42, E_g,AlGaAs = 1.76 eV) of emitter, base, and collector of HBTs, is employed for exclusive excitation of carriers only from the interface states in the photo-responsive energy range at emitter–base heterointerface. The proposed method is applied to an Al_0.3Ga_0.7As/GaAs HBT (A_E = W_E × L_E = 250 × 100 μm²) with E_ph = 0.943 eV and P_opt = 3 mW. Extracted interface trap density D_it was observed to be D_it,max  4.2 × 10¹² eV⁻¹ cm⁻² at emitter–base heterointerface.     

Multiuser adaptive transmission technique for time-varying frequency-selective fading channels

This paper proposes an efficient multiuser adaptive modulation and coding (AMC) scheme that considers inevitable feedback delay by employing short-term and long-term channel state information (CSI) in time-varying frequency-selective fading channels. By taking the statistic of the true signal-to-noise ratio (SNR) at a given predicted SNR value into account, the required transmit power to meet the target packet-error-rate (PER) can be obtained and used for user selection, power allocation, and modulation and coding set (MCS) selection. In addition, a simple and useful approximation method of obtaining the required transmit power is proposed. The performance of the proposed scheme is shown to be much better than that of conventional schemes without considering the feedback delay or the prediction error. The proposed scheme can also reduce the feedback resource while maintaining the system throughput by allocating different feedback resources to different users according to their prediction error variances.     

Service differentiation scheme in OBS networks

In order to achieve service differentiation, especially loss differentiation, in optical burst switching (OBS) networks, we propose a dynamic fiber delay line (FDL) partitioning algorithm, which divides FDLs into several groups over a feed-forward output buffering architecture. In the proposed scheme, a plurality of traffic classes and FDL groups can be considered, and each FDL group is assigned to traffic classes, so that the target loss probabilities of classes are guaranteed. Also, the optimal number of FDLs for each FDL group by the proposed algorithm is decided in Poisson traffic environments. The extensive simulation results validate the effectiveness of the proposed dynamic FDL partitioning algorithm for the loss differentiation in OBS networks.