High-performance 94-GHz single balanced mixer using 70-nm MHEMTs and surface micromachined technology

We reported 94-GHz, low conversion loss, and high isolation single balanced active gate mixer based on 70-nm gate length InGaAs/InAlAs metamorphic high-electron mobility transistors (MHEMTs). This mixer showed that the conversion loss and isolation characteristics were 2.5/spl sim/3.5 dB and under -29 dB in the range of 92.95/spl sim/94.5 GHz, respectively. The low conversion loss of the mixer is mainly attributed to the high-performance of the MHEMTs exhibiting a maximum drain current density of 607 mA/mm, an extrinsic transconductance of 1015 mS/mm, a current gain cutoff frequency (f/sub t/) of 330 GHz, and a maximum oscillation frequency (f/sub max/) of 425 GHz. High isolation characteristics are due to hybrid ring coupler which adopted dielectric-supported air-gapped microstrip line structure using surface micromachined technology. To our knowledge, these results are the best performance demonstrated from 94 GHz single balanced mixer utilizing GaAs-based HEMTs in terms of conversion loss as well as isolation characteristics.     

Small‐Size and High‐Isolation MIMO Antenna for WLAN

A small‐sized (15 mm×30 mm) planar monopole MIMO antenna that offers high‐isolation performance is presented in this letter. The antenna is miniaturized using inductive coupling within a meander‐line radiator and capacitive coupling between a radiator and an isolator. High isolation is achieved by a T‐shaped stub attached to the ground plane between two radiators, which also contributes to the small size using a folded structure and the capacitive coupling with radiators. The proposed antenna operates for the WLAN band within 2.4 GHz to 2.483 GHz. The measured isolation (S₂₁) is about –30 dB, and the envelope correlation coefficient is less than 0.1.     

Specifying and proving properties of timed I/O automata using Tempo

Timed I/O automata (TIOA) is a mathematical framework for modeling and verification of distributed systems that involve discrete and continuous dynamics. TIOA can be used for example, to model a real-time software component controlling a physical process. The TIOA model is sufficiently general to subsume other models in use for timed systems. The Tempo Toolset, currently under development, is aimed at supporting system development based on TIOA specifications. The Tempo Toolset is an extension of the IOA toolkit, which provides a specification simulator, a code generator, and both model checking and theorem proving support for analyzing specifications. This paper focuses on the modeling of timed systems and their properties with TIOA and on the use of TAME4TIOA, the TAME (Timed Automata Modeling Environment) based theorem proving support provided in Tempo, for proving system properties, including timing properties. Several examples are provided by way of illustration.     

Analysis of Electromagnetic Scattering from an Eccentric Multilayered Sphere

An exact analytic solution of a plane electromagnetic (EM) wave scattered by an eccentric multilayered sphere (EMS) is obtained. It is assumed that the layers are perfect dielectrics and that the innermost core is a perfectly conducting sphere. Each center of a layer is translated along the incident axis. All fields are expanded in terms of the spherical vector wave functions with unknown expansion coefficients. The addition theorem for spherical wave functions is used prior to applying the boundary conditions. The unknown coefficients are determined by solving a system of linear equations derived from the boundary conditions. Numerical results of the scattering cross sections are presented on the plane of φ=0 degrees and φ=90 degrees. The convergence of modal solutions and the characteristics of patterns are examined with various geometries and permittivity distributions     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

Reliability analysis and comparison of several structures

In this study, we consider the redundant structure with the function of swithover processing which is assumed to cause the increase of the failure rate of the system. A single component system and a simple redundant system are compared in terms of the four reliability measures such as the reliability function, the MTBF, the failure rate and the mean residual life (MRL). We find the relations of the MTBF, the failure rate, and the MRL between two systems. We also consider a quad configuration system and a parallel string configuration system and evaluate the four reliability measures for two systems. As a numerical example, the total system down of an ATM switching system is considered.     

Fixed Point Implementation of the QCELP Speech Coder

The Qualcomm code excited linear prediction (QCELP) speech coder was adopted to increase the capacity of the CDMA Mobile System (CMS). In this paper, we implemented the QCELP speech coding algorithm by using TMS320C50 fixed point DSP chip. Also the fixed point simulation was done with C language. The computation complexity of QCELP on TMS320C50 was about 33 MIPS and program size was 10k words and data memory was 4k words. In the normal call test on the CMS, where mobile to mobile call test was done in the bypass mode without double vocoding, mean opinion score for the speech quality was 3.11.     

Direct and Indirect Exciton Dynamics in Few‐Layered ReS2 Revealed by Photoluminescence and Pump‐Probe Spectroscopy

Atomically thin‐layered ReS₂ with a distorted 1T structure has attracted attention because of its intriguing optical and electronic properties. Here, the direct and indirect exciton dynamics of a three‐layered ReS₂ is investigated by polarization‐resolved transient photoluminescence (PL) and ultrafast pump‐probe spectroscopy. The various time scales of the decay signals of the time‐resolved PL (<10 ps), with monitoring of the populations of electron–hole pairs (exciton), and the transient differential reflectance (≈1 and 100 ps), with monitoring of the populations of electrons and/or holes in the excited states, are observed. These results reveal the characteristic exciton dynamics: rapid relaxation of direct excitons (electron–hole pairs) and slow relaxation of the momentum‐mismatched indirect excitons accompanied by a one‐phonon emission process. These findings provide important information regarding the indirect bandgap nature of few‐layered ReS₂ and its characteristic exciton dynamics, boosting the understanding of the novel electronic and optical properties of atomically thin‐layered ReS₂.     

Bright Aggregation‐Induced Emission Dots for Dynamic Tracking and Grading of Patient‐Derived Xenografts in Zebrafish

Cancer prognosis will benefit from a scoring system that could grade malignant traits of patient‐derived cells by assessing their growth and metastasis in a living system. Specific tracking of patient‐derived cells requires labeling by contrast agents with good signal‐to‐noise ratio and no specific stain of host tissues. Towards this aim, aggregation‐induced emission (AIE) dots are developed for in vivo cancer tracking with emphasis on reproducible optimized formulation and specific fluorescent labeling of cells that enable enhanced spatial temporal resolution in vivo. The importance of energy‐dependent AIE dots uptake for patient‐derived cell labeling is emphasized to reveal their specific uptake by viable cancer cells. Using optically transparent zebrafish embryo, the ability is demonstrated to follow the engraftment of transplanted AIE dot labeled cells in zebrafish brains over one week. Cells detected outside the brain after 7 d are quantified as metastatic cells. Results from seven clinical samples demonstrate the utility of this methodology to differentiate low engraftment level of benign neoplasms from higher engraftment level and metastasis detected in malignant ovarian cancer specimens. Achieving clinically validated results supports the use of AIE dot labeled patient derived cells in zebrafish xenografts for future cancer prognosis.     

Metamaterial-based electronically controlled transmission-line structure as a novel leaky-wave antenna with tunable radiation angle and beamwidth

A metamaterial-based electronically controlled transmission-line structure is presented and demonstrated as a novel leaky-wave (LW) antenna with tunable radiation angle and beamwidth functionalities. This structure is in essence a composite right/left-handed (CRLH) microstrip structure incorporating varactor diodes for fixed-frequency voltage-controlled operation. Angle scanning at a fixed frequency is achieved by modulating the capacitances of the structure by adjusting the (uniform) bias voltage applied to the varactors. Beamwidth tuning is obtained by making the structure nonuniform by application of a nonuniform bias voltage distribution of the varactors. A rigorous analysis based on an extension of the CRLH concept is proposed and the corresponding dispersion curves, obtained by equivalent-circuit formulas with LC parameters extracted from full-wave simulation, are shown. A 30-cell LW antenna structure, incorporating both series and shunt varactors for optimal impedance matching and maximal tuning range, is designed. This prototype exhibits continuous scanning capability from 50/spl deg/ to -49/spl deg/ by tuning the bias voltages from 0 to 21 V at 3.33 GHz. A maximum gain of 18 dBi at broadside is also achieved. In addition, it provides half-power beamwidth variation of up to 200% with comparison to the case of uniform biasing. The effect of intermodulation due to the nonlinearity of the varactors is shown to be negligible for antenna applications. The antenna is tested in a 10-Mb/s binary phase-shift key transmission link and successful recovery of the baseband data is demonstrated.