Predictions of the Joule–Thomson inversion curves for polar and non-polar fluids from the SAFT-CP equation of state

In this work, we calculate the Joule–Thomson inversion curves of some non-polar fluids, including argon, nitrogen, oxygen, carbon dioxide, n-alkanes (C₁–C₄), ethene, acetylene, benzene and toluene and some polar fluids, including hydrogen sulfide, ammonia, acetone and ethyl ether from the SAFT-CP equation of state. Comparisons with correlated experimental data and reference equation of state indicate that this molecular based equation of state gives good prediction for non-polar fluids. For polar fluids, the predictions of the low-temperature branch are satisfied; but, unfortunately, due to lack of isenthalpic data for high-pressure–high-temperature gas condensate, the reliability of model predictions could not be completely verified. In this work, the performance of some cubic equations of state in predicting the Joule–Thomson inversion curves is also compared with SAFT-CP equation of state.     

Preparation of cerium oxide–MWCNTs nanocomposite bulk modified carbon ceramic electrode: a sensitive sensor for tamoxifen determination in human serum samples

In this study, cerium oxide and multi-walled carbon nanotubes nanocomposite were incorporated into the carbon ceramic electrode (CeO₂–MWCNTs/CCE) as a renewable electrode for the electrocatalytic purposes. To demonstrate capability of the fabricated electrode, determination of tamoxifen as an important anticancer drug with differential pulse voltammetry technique was evaluated in details. Linear range, limit of detection and sensitivity of the developed sensor were found to be 0.2–40 nM, 0.132 nM and 1.478 µA nM^?1 cm^?2, respectively. Ease of production, low cost and high electron transfer rate of the CeO₂–MWCNTs/CCE promises it as a novel electro-analytical tool for determination of important species in real samples.

     

A new method for producing optically active polybutadiene

The anionic polymerization of butadiene monomer in cyclohexane at 20°C gave polybutadiene (PB50) with a narrow molecular weight distribution. This polymer was allowed to react with 4-phenyl-1,2,4-triazoline-3,5-dione via the ‘ene’ reaction to the extent of 5, 10 and 15%. These functionalized polymers were reacted with N-phthaloyl-L -leucine acid chloride in the presence of pyridine at room temperature. These reactions lead to the replacement of N-H by an optically active group, and the resulting polymers became optically active. Some structural characterization and physical properties of these optically active polybutadienes are reported. © 1998 Society of Chemical Industry     

Preparation of Janus-type superparamagnetic iron oxide nanoparticles modified with functionalized PCL/PHEMA via photopolymerization for dual drug delivery

In this study, superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized by the coprecipitation of FeCl₂˙4H₂O and FeCl₃˙6H₂O and applied as a core for preparation of Janus nanoparticles. Accordingly, freshly modified methacrylated iron oxide nanoparticles were reacted with two functionalized polymers. Acrylated poly(ε-caprolactone) (PCL) and acrylated poly(2-hydroxyethyl methacrylate) (PHEMA) were synthesized via ring-opening and free-radical polymerization, respectively, and subsequent modification with acryloyl chloride. Acrylated PCL as the hydrophobic part and acrylated PHEMA as the hydrophilic domain were grafted on the surface of methacrylated iron oxide nanoparticles with two morphologies. Pickering emulsion and solution photopolymerization reactions were used to prepare nanoparticles with “Janus” and “mixed” morphologies, respectively. The products were characterized in each step using Fourier-transform infrared spectroscopy (FT-IR), Proton nuclear magnetic resonance (¹H-NMR), thermogravimetric analysis (TGA), dynamic light scaterring (DLS), transmission electron microscope (TEM), vibrating-sample magnetometer (VSM), energy dispersive X-ray (EDX), and ultraviolet–visible spectroscopy (UV-Vis). Quercetin and 5-FU (as two anticancer drugs) were loaded in the mentioned nanoparticles, and the drug loading capacity and encapsulation efficiency (EE) of these nanoparticles were calculated. in vitro release behavior at two pH values (5.8 and 7.4) and at 37°C demonstrated that morphology can affect the release profile. Finally, rat C6 cell viability was determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide (MTT) assay for drug-free and drug-loaded nanoparticles.     

Preparation and characterization of photocatalytic titania–alumina composite membranes by sol–gel methods

Titania–alumina composite membranes containing 10 and 20 mol% alumina were prepared by two different sol–gel methods; co-hydrolysis and separately peptized. The samples were characterized by different techniques. XRD results showed that for the composite membranes the anatase to rutile transformation temperature was increased by 200 and 300 °C. According to specific surface area results, alumina effectively increased the specific surface area of composite membranes compared to pure titania membranes. Microstructure of composite supported membranes was considered by scanning electron microscopy and showed a crack-free layer with 1 μm thickness. The photocatalytic activity of composite samples showed that alumina addition up to an optimum amount can slightly affect the photocatalytic activity of titania.     

Investigation of the performance of several chemical additives on inhibition of asphaltene precipitation

The inhibition effects of several chemical additives on asphaltene precipitation were investigated by the microscopic method. The additives consist of a synthesized deep eutectic solvent (SDES), a commercial inhibitor, and three surfactants, namely lauric acid, octyl phenol, and dodecyl amine. The results showed the octyl phenol with 500 mg/L concentration is similar to commercial inhibitor and later SDES had the maximum effects on delaying the asphaltene precipitation onset point. The mean particle size of asphaltene using octyl phenol, SDES, lauric acid, and dodecyl amine decreased about 55%, 41%, 24%, and 18%, respectively, compared to the oil sample without any chemical additives.     

Power induced by bubbles of different sizes and frequencies on to hollow fibers in submerged membrane systems

To shed light onto the relationship between sparging conditions and fouling control in submerged hollow fiber membranes, the effects of bubble size and frequency on the hydrodynamic conditions induced in membrane system were studied. Two general classes of bubbles were considered: coarse (0.75–2.5 mL) and pulse (100–500 mL). The power transferred (P_trans) onto membranes could be used to characterise the multiple effects induced under different sparging conditions. P_trans is proportional to root mean square of shear stress (τ_rms), the area of zone of influence (i.e. the fraction in the system where high velocity and high vorticity (turbulence) are induced by the bubble) and their rise velocity. At a given sparging rate, the power transferred onto membranes was less with coarse bubble sparging than pulse bubble sparging and increased with the size of pulse bubbles. For all cases, the power transfer efficiency was consistently higher for pulse bubble sparging than for coarse bubble sparging. The power transfer efficiency to the system was greatest for the small pulse bubbles considered when a small amount of power is required for fouling control. However, when fouling is extensive, large pulse bubbles may be required to generate the required amount of power for fouling control.     

Experimental evaluation of a vibration-based leak detection technique for water pipelines

Conventional water pipeline leak detection surveys employ labour-intensive acoustic techniques, which are usually expensive and not amenable for continuous monitoring of distribution systems. Many previous studies attempted to address these limitations by proposing and evaluating a myriad of continuous, long-term monitoring techniques. However, these techniques have difficulty to identify leaks in the presence of pipeline system complexities (e.g. T-joints), offered limited compatibility with popular pipe materials (e.g. PVC), and were in some cases intrusive in nature. Recently, a non-intrusive pipeline surface vibration-based leak detection technique has been proposed to address some of the limitations of the previous studies. This new technique involves continuous monitoring of the change in the cross-spectral density of surface vibration measured at discrete locations along the pipeline. Previously, the capabilities of this technique have been demonstrated through an experimental campaign carried out on a simple pipeline set-up. This paper presents a follow-up evaluation of the new technique in a real-size experimental looped pipeline system located in a laboratory with complexities, such as junctions, bends and varying pipeline sizes. The results revealed the potential feasibility of the proposed technique to detect and assess the onset of single or multiple leaks in a complex system.