A DS-CDMA system using despreading sequences weighted by adjustablechip waveforms

This paper evaluates the performance of a direct-sequence code-division multiple-access system using coherent receivers in which the despreading sequences are weighted by adjustable chip waveforms. The chip weighting waveforms under consideration are designed for multiple-access interference (MAI) rejection. Assuming that the received chip waveforms are rectangular, new expressions for the signal-to-interference-plus-noise ratio (SINR) of the decision variable are derived when different weighted despreading sequences (WDSs) are used in the receiver. The novelty of the derived expressions is that each of the expressions, when the system parameters are given, is determined only by one parameter of the adjustable chip waveforms employed. As a result, we can simply tune the parameter to its optimal value in real-time for MAI rejection without knowing the other users' spreading codes, timing, and phase. The criterion for tuning the parameter is to maximize the SINR of the decision variable based on the relative strength between the additive Gaussian white noise and the MAI. Numerical results show that when the multiple-access interference is significant, the receivers using WDSs outperform significantly the conventional receiver using a rectangular despreading sequence. Brief analysis for bandlimited spreading signals is also provided to reveal the practical implications of the proposed technique     

Fabrication of porous ZnO via electrochemical etching using 10 wt% potassium hydroxide solution

We described the fabrication of porous ZnO using the electrochemical etching method. ZnO thin films deposited by radiofrequency sputtering were etched electrochemically using 10 wt% KOH solution as an etching medium to obtain porous ZnO surface structure. A constant voltage of 15 V was applied to enhance the etching process. The etched samples were then characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectroscopy to examine their structural and optical properties. XRD spectra showed that by performing the electrochemical etching process, porous ZnO could be obtained without severely deteriorating the crystallinity of the samples. Moreover, SEM characterization revealed that hillock-type porous ZnO was fabricated successfully. In addition, the cross-sectional SEM images revealed that there were only minimal changes in the layer thickness after the ZnO had been etched for various lengths of time. This finding shows the dominance of the vertical etching process. Notably, the intensity of PL spectra increased and the PL excitation peak exhibited a red shift trend as the etching time increased. These observations are due to the increase of the surface to volume ratio of the ZnO surface and the strain relaxation along the dislocation and grain boundary.     

Structural and Optical Properties of ZnO Nanotips Grown on GaN Using Metalorganic Chemical Vapor Deposition

ZnO nanotips are grown on epitaxial GaN/c-sapphire templates by metalorganic chemical vapor deposition. X-ray diffraction (XRD) studies indicate that the epitaxial relationship between ZnO nanotips and the GaN layer is (0002)ZnO||(0002)GaN and (101̄0)ZnO||(101̄0)GaN. Temperature-dependent photoluminescence (PL) spectra have been measured. Sharp free exciton and donor-bound exciton peaks are observed at 4.4 K with photon energies of 3.380 eV, 3.369 eV, and 3.364 eV, confirming high optical quality of ZnO nanotips. Free exciton emission dominates at temperatures above 50 K. The thermal dissociation of these bound excitons forms free excitons and neutral donors. The thermal activation energies of the bound excitons at 3.369 eV and 3.364 eV are 11 meV and 16 meV, respectively. Temperature-dependent free A exciton peak emission is fitted to the Varshni’s equation to study the variation of energy bandgap versus temperature.     

T-Ray Sensing and Imaging

T-ray wavelengths are long enough to pass through dry, nonpolar objects opaque at visible wavelengths, but short enough to be manipulated by optical components to form an image. Sensing in this band potentially provides advantages in a number of areas of interest to security and defense such as screening of personnel for hidden objects and the retection of chemical and biological agents. Several private companies are developing smaller, reliable cheaper systems allowing for commercialization and this motivates us to review a number of promising applications within this paper. While there are a number of challenges to be overcome there is little doubt that T-ray technology will play a significant role in the near future for advancement of security, public health, and defense.     

Dynamic group multicast routing with bandwidth reservations

Multicasting refers to the transmission of data from a source node to multiple destination nodes in a network. Group multicasting is a generalization of multicasting whereby every member of a group is allowed to multicast messages to other members that belong to the same group. The routing problem in this case involves the construction of a set of low cost multicast trees with bandwidth requirements, one for each member of the group for multicasting messages to other members of the group. In this paper, we examine this routing problem with an additional requirement that member nodes are allowed to join and leave the multicasting group anytime during a session. We call this problem, the dynamic group multicast routing problem (DGMRP). In this paper, we proposed three heuristic algorithms to generate a set of low cost multicast trees with dynamic group membership. Results from our empirical study shows that the one of the proposed algorithms, called Maximum bandwidth bottleneck path selection algorithm (MBBPS), achieves better utilization of bandwidth resources as compared with the other two algorithms which are based on a greedy approach. In addition MBBPS performs better in terms of cost when the bandwidth is not sufficient in the network. Copyright © 2002 John Wiley & Sons, Ltd.     

Strange chaotic attractor crowding in boost converter model

A set of chaotic attractors is observed on a boost converter model. The union of their Poincare maps is strange. The attractors are densely packed such that they are sensitive to initial conditions. However every attractor in the set is stable with a finite (may be long) period     

795 nm and 1064 nm dual pump thulium-doped tellurite fibre for S-band amplification

Gain measurement in thulium-doped tellurite fibre is demonstrated with a maximum internal gain of 7 dB at 1480 nm. An improvement in gain by a factor of 2 is achieved using a 795 nm and 1064 nm dual pump scheme. Gain in tellurite fibres extends to longer wavelength than in fluorides, showing improved overlap with the C-band EDFA.     

Inkjet Printed Large‐Area Flexible Few‐Layer Graphene Thermoelectrics

Graphene‐based organic nanocomposites have ascended as promising candidates for thermoelectric energy conversion. In order to adopt existing scalable printing methods for developing thermostable graphene‐based thermoelectric devices, optimization of both the material ink and the thermoelectric properties of the resulting films are required. Here, inkjet‐printed large‐area flexible graphene thin films with outstanding thermoelectric properties are reported. The thermal and electronic transport properties of the films reveal the so‐called phonon‐glass electron‐crystal character (i.e., electrical transport behavior akin to that of few‐layer graphene flakes with quenched thermal transport arising from the disordered nanoporous structure). As a result, the all‐graphene films show a room‐temperature thermoelectric power factor of 18.7 µW m^?1 K^?2, representing over a threefold improvement to previous solution‐processed all‐graphene structures. The demonstration of inkjet‐printed thermoelectric devices underscores the potential for future flexible, scalable, and low‐cost thermoelectric applications, such as harvesting energy from body heat in wearable applications.     

Simultaneous temperature and lateral force measurement using simple arc-shaped FBG sensor module

An arc-shaped fibre Bragg grating (FBG) sensor module, containing a pair of FBGs is constructed, which enables simultaneous temperature and lateral force measurements. Experimental study of a module, with such a structure, shows good agreement with theoretical analysis     

The influence of solder volume and pad area on Sn–3.8Ag–0.7Cu and Ni UBM reaction in reflow soldering and isothermal aging

This paper examines various aspects of SAC (Sn–3.8Ag–0.7Cu wt.%) solder and UBM interactions which may impact interconnection reliability as it scales down. With different solder joint sizes, the dissolution rate of UBM and IMC growth kinetics will be different. Solder bumps on 250, 80 and 40 μm diameter UBM pads were investigated. The effect of solder volume/pad metallization area (V/A) ratio on IMC growth and Ni dissolution was investigated during reflow soldering and solid state isothermal aging. Higher V/A ratio produced thinner and more fragmented IMC morphology in SAC solder/Ni UBM reflow soldering interfacial reaction. Lower V/A ratio produced better defined IMC layer at the Ni UBM interface. When the ratio of V/A is constant, the IMC morphology and growth trend was found to be similar. After 250 h of isothermal aging, the IMC growth rate of the different bump sizes leveled off. No degradation in shear strength was observed in these solder bump after 500 h of isothermal aging.