Myoglobin adsorption onto poly(glycidyl methacrylate) microbeads with surface functionalized iminodiacetic acid

In this study, poly(glycidyl methacrylate) [PGMA] microbeads with surface modified iminodiacetic acid (IDA) were used for myoglobin (Mb) adsorption from buffer solutions at different pHs and ionic strengths in a packed-bed column. Attenuated Total Reflectance Fourier Transformed Infrared (ATR-FTIR) spectroscopy and scanning electron microscopy (SEM) measurements before and after the adsorption process confirmed the structural stability of adsorbed Mb. The effects of initial concentration, flow-rate, pH and ionic strength on the adsorption were investigated. The results showed that the maximum amount of protein was adsorbed at a pH 7.0, which is the protein isoelectric point. The adsorption is rationalized in terms of local electrostatic forces acting between the protein and the IDA modified PGMA surface as well as hydrophobic interactions close to the protein isoelectric point, whereas at low pH the global changes give rise to protein–protein repulsion and at high pH protein-support material repulsion.     

Effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms

This work is concerned with the effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms. The results indicate that the presence of liquid water at the interfacial zone during the epoxy injection process disrupts the initial bond configurations. The freezing and thawing up to about 40 cycles do not have a significant effect on the bond stability. An adequate degree of chemical stability is maintained in the bond line by the epoxy adhesives after 120 days of exposure to corrosive environments such as MgSO₄ and MgCl₂. However, there is a pronounced effect of these chemical substances on the concrete strength. The load-bearing capacity of epoxy-bonded concrete prisms decreases with increasing temperature. Despite this fact, the EP3-bonded concrete prisms give relatively high joint strengths at temperatures up to 100 °C.     

The investigation of the effect of thermal barrier coating on the performance of Stirling engine

The shuttle heat transfer is one of the reasons reducing the performance of Stirling engines. This study is concerned with the reduction in shuttle heat transfer by coating the displacer. The displacer of a gamma type Stirling engine was coated with a layer of yttria‐stabilized zirconia (YSZ), and the effect of the coating on the engine performance was evaluated by comparing speed‐power and speed‐torque characteristics of the engine with coated and uncoated displacers. Characteristics were obtained for 700, 800 and 900°C heater temperatures. At each stage of the heater temperature, the charge pressure ranged from 1 to 3.5 bars with 0.5 bar increments. At 900°C heater temperature and 3 bars charge pressure, the shaft power before coating was 34.9 W, after coating the power increased to 43.8 W, which corresponds to a 25% increment. The temperature applied to the engine did not cause any damage on the coating layer. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of conducting copolymers of thiophene-3-yl acetic acid cholesteryl ester with pyrrole

A new polythiophene containing a cholesteryl side chain in the -position was chemically polymerised in nitromethane/carbontetrachloride using FeCl₃ as the oxidizing agent. Polymerisation was also achieved by constant current electrolysis in dichloromethane. Subsequently, conducting copolymers of thiophene-3-yl acetic acid cholesteryl ester (CM), PCM1 (obtained from chemical polymerisation method) and PCM4 (obtained from constant current electrolysis) with pyrrole were synthesized using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolyses. Characterizations of the samples were performed by CV, FTIR, NMR, DSC, TGA and SEM analyses. Electrical conductivities were measured by the four-probe technique.     

Edge-Cut Bounds on Network Coding Rates

Active networks are network architectures with processors that are capable of executing code carried by the packets passing through them. A critical network management concern is the optimization of such networks and tight bounds on their performance serve as useful design benchmarks. A new bound on communication rates is developed that applies to network coding, which is a promising active network application that has processors transmit packets that are general functions, for example a bit-wise XOR, of selected received packets. The bound generalizes an edge-cut bound on routing rates by progressively removing edges from the network graph and checking whether certain strengthened d-separation conditions are satisfied. The bound improves on the cut-set bound and its efficacy is demonstrated by showing that routing is rate-optimal for some commonly cited examples in the networking literature.     

Effect of growth rate and lamellar spacing on microhardness in the directionally solidified Pb-Cd, Sn-Zn and Bi-Cd eutectic alloys

Lead-cadmium, Zinc-tin and Bismuth-cadmium of (99.99%) high purity eutectic alloys were melted in a graphite crucible under vacuum atmosphere. These eutectic alloys were directionally solidified upward with a constant temperature gradient G and different growth rates V in the Bridgman type directional solidification furnace. The lamellar spacings and microhardness H _V were measured from both transverse section and longitudinal section of the specimen. The variations of H _V with respect to V and have been determined by using the linear regression analysis method. H _V values increase with the increasing values of V and decrease with the increasing values. The Hall-petch type relationships obtained in this work have been compared with the previous works.     

A COMPARATIVE STUDY ON PARTICLE SWARM OPTIMIZATION AND GENETIC ALGORITHMS FOR TRAVELING SALESMAN PROBLEMS

This article deals with a performance evaluation of particle swarm optimization (PSO) and genetic algorithms (GA) for traveling salesman problem (TSP). This problem is known to be NP-hard, and consists of the solution containing N! permutations. The objective of the study is to compare the ability to solve the large-scale and other benchmark problems for both algorithms. All simulation has been performed using a software program developed in the Delphi environment. As yet, overall results show that genetic algorithms generally can find better solutions compared to the PSO algorithm, but in terms of average generation it is not good enough.     

A dwell time approach to the stability of switched linear systems based on the distance between eigenvector sets

In this article, a sufficient condition on the minimum dwell time that guarantees the stability of switched linear systems is given. The proposed method interprets the stability of switched linear systems through the distance between the eigenvector sets of subsystem matrices. Thus, an explicit relation in view of stability is obtained between the family of the involved subsytems and the set of admissible switching signals.     

Automatic map-guided extraction of roads from SPOT imagery for cartographic database updating

Abstract

The launching of the Satellite Probatoire d'Observation de la Terre (SPOT) has permitted the acquisition of images with a relatively fine ground resolution (10 and 20 m). Such improvement has brought forward the possibility of medium-scale mapping using such data. In this paper we are proposing an automatic approach to 1:50000 scale planimetric data revision using the panchromatic channel of SPOT imagery (10m of ground resolution). A software package has been developed that performs an automatic map-guided extraction of objects from the SPOT image for map revision purposes. The programs are fully described along with some conclusive results through the updating of the road network on a topographic map. An attempt has been made to give a preview of how such a map-guided approach can be extended to other linear features and possibly two-dimensional objects as well.