Compatibility of polysaccharide/maleic copolymer blends. IV. Thermal behavior of hydroxypropyl cellulose‐containing blends

The compatibility of the hydroxypropyl cellulose (HPC) with maleic acid–vinyl acetate copolymer in the solid state was studied by thermogravimetry, thermo‐optical analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and optical microscopy. It was established that physical interactions are prevalent in blends with a high content of HPC, whereas chemical interactions predominate in blends with a medium and low content of HPC. By increasing the temperature, the thermochemical reactions are favored. Thermal properties are dependent on the mixing ratio of the components. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2585–2597, 2003     

Digestibility and nutritional value of crude oil from three amaranth species

Oils from a selection ofAmaranthus caudatus, A. hypochondriacus andA. cruentus were extracted with hexane. The crude oils were analyzed for acid value, saponification and iodine number, and were included in basal casein diets for rat studies at 5 and 10% levels to replace equal amounts of refined cottonseed oil. The oils fromA. cruentus andA. hypochondriacus were similar in the oil properties studied and different fromA. caudatus. At either 5 or 10% food intake levels, weight gain and PER were not statistically different from values reported for cottonseed oil. True digestibility of amaranth oil was lower than that of cottonseed oil.A. cruentus oil gave the lowest digestibility. Oil levels induced statistical differences in food intake and digestibility. Oils fromA. caudatus, A. hypochondriacus and cottonseed induced similar serum cholesterol levels, while oil fromA. cruentus gave statistically higher values. Hemoglobin, hematocrit and serum proteins were similar among all groups. Microscopic analysis of the organs of the rats revealed some changes that were also found in cottonseed oil-fed rats. It was concluded that crude amaranth oil has lower digestibility than cottonseed oil, but that it is not responsible for growth-depressing effects when the seed is fed raw as compared to processed materials.     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Optimal Operating Conditions For Lab-Scale Ozonation Reactors

A method for the assessment of the optimal operating conditions for a mechanically stirred gas–liquid reactor is presented. The method exploits both fluid dynamic and chemical information. First, the behavior of the specific stirring power as a function of the stirrer speed allows singling out the dispersion region, in which the most efficient gas–liquid mass transfer is achieved. Inside this region, the analysis of experimental data obtained when considering a chemical system reacting at moderate Hatta numbers (i.e., Ha < about 2) allows determination of the rate constants and the fluid dynamic parameters (i.e., the mass transfer coefficient in the absence of chemical reaction and the characteristic diffusion time).     

Modelling the effects of human papillomavirus in cervical cells

Worldwide, cervical cancer is the second most common cancer in women, after breast cancer. The prevalence of this malignant disease is estimated at 1.4 million cases worldwide, causing about 290,000 deaths and 500,000 new cases per year, of which 80% correspond to women living in developing countries. In this work we propose a family of ordered models for basal cells of the cervix corresponding to different stages ranging from normal cells to the formation of precancerous lesions. We analyse the first member of the family analytically and for the second member we developed a non-standard numerical method in order to extract some biological information.     

Reduction of sulphur in PbSPbCl2NaCl melts

The reduction of dissolved sulphur and the soluble species formed during the electrolysis of PbS dissolved in the PbCl₂NaCl eutectic has been studied chronopotentiometrically. The pre-lead reduction process reported earlier[1] can now be assigned to a subsulphide species that is generated electrochemically. At higher PbS concentrations (eg 10^?3 mol cm^?3), elemental sulphur introduces a new reduction wave in addition to the subsulphide. The saturation solubility of sulphur is approximately proportional to the square of the PbS concentration. It has been estimated to be 2.3× 10^?4 mol S cm^?3 at 430°C for a melt containing 2.4× 10^?3 mol PbS cm^?3 in the PbCl₂-NaCl eutectic.     

Alkali silica reactivity of agglomerated silica fume

It is commonly accepted that replacement of a portion of cement in mortar or concrete with well-dispersed silica fume reduces expansion caused by alkali silica reaction. Recently there has been much discussion that large, agglomerated particles of silica fume may actually act as alkali silica reactive aggregates, thereby increasing expansion rather than reducing it. The data in the literature, from both field and laboratory studies, are inconsistent. This prompted an extensive laboratory investigation into the alkali silica reactivity of silica fume. Results from accelerated expansion testing and microscopic investigations are presented. It was seen that some agglomerated silica fumes participate in ASR while others do not. Factors determining the reactivity of silica fume agglomerates are suggested.     

Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

A formal representation for context-aware business processes

A business process is a set of activities performed in a coordinated manner within an organizational and technical environment that is aimed toward a business goal. The flexibility of a process is related to an understanding of the unexpected events that occur when people, systems and resources interact and require adjustments. Thus, business processes must be designed to respond to information about different events and their specificity. This information defines what the literature calls “context”. To broaden the perception of context in the case of a business process, this work proposes an approach to characterize the context of a business process activity in a given domain through conceptual models structured in layers. A case study was conducted to evaluate the proposal, which provided evidence of the applicability of the model.     

Electrochromic WO3−x films with reduced lattice deformation stress and fast response time

Electrochromic properties of electrochemically deposited and etched (EDE) WO_3−x films have been investigated using voltammetry and nanogravimetry to elucidate the amount of residual stress associated with lattice polarization and deformation in WO_3−x nanoparticles. The cathodic WO_3−x deposition from pertungstic acid solution and unusual properties of the cathodic electroetching of the oxide in tetraethyl ammonium chloride solution are reported and elucidated on the basis of Electrochemical Quartz Crystal Nanogravimetry (EQCN) measurements. The stress enhanced resonant frequency shift was observed upon WO_3−x film coloration. However, the stress enhancement appeared to be much lower (up to 4-6 times) than that measured for films synthesized by other methods. The stress reduction in WO_3−x films under study has been attributed to the stress relaxing propensity of EDE film to suppress the compressive stress wave. A considerable isotopic effect has been observed in nanogravimetry of the H⁺ and D⁺ ion intercalation into WO_3−x films. We have found that the isotopic effect is primarily due to the true mass loading difference between hydrogen and deuterium ions, for the same concentration of color centers (2.65 × 10²¹ cm⁻³), since EQCN frequency shifts associated with stress in the film for H⁺ and D⁺ are very close to each other.