Influence of Amorphous Grain Boundary Phases on the Superplastic Behavior of 3-mol%-Yttria-Stabilized Tetragonal Zirconia Polycrystals (3Y-TZP)

Amorphous silicate grain boundary phases of varying chemistry and amounts were added to 3Y-TZP in order to determine their influence on the superplastic behavior between 1200° and 1300°C and on the room-temperature mechanical properties. Strain rate enhancement at high temperatures was observed in 3Y-TZP containing a glassy grain boundary phase, even with as little as 0.1 wt% glass. Strain rate enhancement was greatest in 3Y-TZP with 5 wt% glass, but the room-temperature hardness, elastic modulus, and fracture toughness were degraded. The addition of glassy grain boundary phases did not significantly affect the stress exponent of 3Y-TZP, but did lower the activation energy for superplastic flow. Strain rate enhancement was highest in samples containing the grain boundary phase with the highest solubility for Y₂O₃ and ZrO₂, but the strain rate did not scale inversely with the viscosity of the silicate phases. Grain boundary sliding accommodated by diffusional creep controlled by an interface reaction is proposed as the mechanism for superplastic deformation in 3Y-TZP with and without glassy grain boundary phases.     

Aboveground nitrogen in relation to estimated total plant uptake in maize and bean

The main objective of this field study was to estimate the total plant uptake of soil mineral N in maize (Zea mays L.) and common bean (Phaseolus vulgaris L.) grown in crop rotations under different N content in Nicaragua. Secondary objectives were to estimate the fraction of the measured soil mineral N content taken up in this way, and to determine how the measured N in plant aboveground parts was related to the total mineral N uptake. A large variation in N content was obtained by using data from fertilisation experiments. Plant total N uptake was estimated as the residual N in a mass balance calculation of soil mineral N. Mineral N content in the top 0–0.3 m soil layer in the field cultivations and in tubes isolated from root uptake, and N content in aboveground plant parts were measured every 30 days. Estimated plant total uptake of soil mineral N varied considerably (2.5–14 g N m⁻² 30 day⁻¹) over periods and N treatments. The range of variation was similar for maize and bean. The fraction of the soil mineral N that was taken up by the plant daily varied more in maize (about 0.03–0.12 day⁻¹) than in bean (about 0.05–0.08 day⁻¹). Our results suggest that monthly changes in N in aboveground plant parts were linearly related to plant total N uptake during the same period. Aboveground plant N constituted between about 55% and 80% of total uptake of soil mineral N in maize depending on period within season, whereas for bean it was more constant and smaller (about 40%).     

Enantiospecific synthesis fromd-fructose of (2S,5R)- and (2R,5R)-2-methyl-1,6-dioxaspiro[4.5]decane [the odor bouquet minor components ofParavespula vulgaris (L.)]

The synthesis of (2S,5R)-(1) and (2R,5R)-2-methyl-1,6-dioxaspiro [4.5]decane (2) from (2RS,5R,8R,9R,10S)-8,9,10-trihydroxy-2-methyl-1, 6-dioxaspiro[4.5]decane (8), obtained in five steps fromd-fructose using Wittig's methodology, reduction, and spiroketalation, has been accomplished by a Corey dideoxygenation at C-8,9, followed by a Barton deoxygenation at C-10, of the appropriately protected derivatives.Enantiospecific synthesis of spirocetals. Part V. For Part IV, see Izquierdo et al. (1992).     

Lightweight dynamic symmetry breaking

Symmetries in constraint problems present an opportunity for reducing search. This paper presents Lightweight Dynamic Symmetry Breaking, an automatic symmetry breaking method that is efficient enough to be used as a default, since it never yields a major slowdown while often giving major performance improvements. This is achieved by automatically exploiting certain kinds of symmetry that are common, can be compactly represented, easily and efficiently processed, automatically detected, and lead to large reductions in search. Moreover, the method is easy to implement and integrate in any constraint system. Experimental results show the method is competitive with the best symmetry breaking methods without risking poor performance.     

Computational Aspects of Uncertainty Profiles and Angel-Daemon Games

We analyze the complexity of equilibria problems for a class of strategic zero-sum games, called angel-daemon games. Those games were introduced to asses the performance of the execution of a web orchestration on a moderate faulty or under stress environment. Angel-daemon games are a natural example of zero-sum games whose representation is naturally succinct. We show that the problems of deciding the existence of a pure Nash equilibrium or of a dominant strategy for a given player are ${\Sigma}^{p}_{2}$ -complete. Furthermore, computing the value of an angel-daemon game is EXP-complete. Thus, our results match the already known classification of the corresponding problems for the generic families of succinctly represented games with exponential number of actions.     

Spatio-temporal hotspots and application on a disease analysis case via GIS

Hotspot analysis is a spatial analysis that uses cluster techniques for determining areas with elevated concentrations of localized events. We use the consolidated Extended Fuzzy C-Means algorithm to determine the hotspot areas on the map as circles, moreover the advantages of this technique are the linear computational complexity, the robustness to noise and outliers, the automatic determination of the optimal number C of clusters (in the classical FCM algorithm C is chosen a priori). Furthermore it prevents the problem of shifting the clusters with low density area of data points in areas with higher density of such points. We apply this method to study the spatio-temporal variations of the hotspot areas by testing this process on a specific disease problem, precisely we have clusterized 5,000 point-events correspondent to cases of brain cancer detected in the state of New Mexico from 1973 to 1991. We also show that the same results are obtained by using the Extended Gustafson–Kessel algorithm which gives elliptical clusters. We have implemented both algorithms in a Geographic Information System environment. Thus we establish the areas which seem not interested from the incidence of the disease and those areas in which the phenomenon appears to be temporarily attenuated either increased or constant or quite disappeared.     

Blends of i‐PP and SBS. I. Influence of the in situ compatibilization on the morphology

This article concerns the in situ compatibilization of immiscible isotactic polypropylene/butadiene‐styrene‐butadiene triblock copolymer blends (i‐PP/SBS) by means of a reactive mixture. For this purpose, maleated PP (PP‐MAH) and SBS (SBS‐MAH) were used as functionalized polymers and 4,4′‐diaminediphenylmethane was used as a coupling agent between maleated polymers, resulting in a graft copolymer. Binary blends i‐PP/SBS, nonreactive ternary blends i‐PP/PP‐MAH/SBS, and reactive ternary blends i‐PP/PP‐MAH/SBS‐MAH with varying diamine and anhydride molar ratios were prepared. Torque measurements suggest a graft copolymerization during the melt blending for ternary reactive blends, but the extension of the grafting does not vary with the diamine and anhydride molar ratio, but with the elastomer concentration. The morphology of the blends was investigated by scanning electron microscopy. The morphology of binary and ternary nonreactive blends is similar, exhibiting elastomer domains disperse in the i‐PP matrix, whose sizes increase with elastomer concentration. On the other hand, the elastomer domain size in the ternary reactive blends is practically independent of the blends composition and of the diamine and anhydride molar ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 847–855, 2002     

Morphology and thermomechanical properties of recycled PET–organoclay nanocomposites

Recycled PET/organoclay nanocomposites were prepared by melt intercalation process with several amounts (1, 3, and 5 wt %) of clay modified with quaternary ammonium salt (DELLITE 67G) dispersed in a recycled poly(ethylene terephthalate) (rPET) matrix. The resultant mechanical properties (modulus and yield strength) of the nanocomposites were found to be different from those of rPET. Wide angle X‐ray scattering (WAXS) and Transmission Electron Microscopy (TEM) measurements have shown that although complete exfoliation was not achieved, delaminated clay platelets could be observed. Thermal analysis did not show significant changes in the thermal properties from those of recycled PET. Mechanical testing showed that nanocomposite properties were superior to the recycled PET in terms of strength and elasticity modulus. This improvement was attributed to nanoscale effects and strong interaction between the rPET matrix and the clay interface, as revealed by WAXS and TEM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1839–1844, 2007     

Reciprocal Tree-Like Fractal Structures

Sometimes the complex structures of nature inspire human constructions. Gothic construction has shown that forces can cross space along intricate paths that may even be arbitrary if correctly dimensioned. In some way, ribbed structures are like trees where the branches conduct forces instead of sap; they operate as branches and trunks descending by fractal ways. Here we discuss reciprocal tree-like fractal structures and the difficulty in their design and erection and solutions for constructive details, as well as the possible analytical questions and automatic generation by means of proper software. The results are shown in the design of the Natural Interpretation Centre in Melilla where we have proposed two connected trees like shown at figures included below.     

Effect of patchwise slip on fluid flow

In this paper, we show that large connected slip patches (hydrophobic patches) are a necessity to induce macroscopic slip effects of water flow in microchannels. For this purpose, the 2D fluid flow between a planar stationary surface with alternating stick and slip patches and a parallel planar surface moving with a constant relative velocity has been studied by computer simulations based on Navier–Stokes equations. A slip patch is defined as the slipping length in a 2D system or a slip area of the surface in a 3D system. The simulations reveal that the ratio (size of each slip patch)/(distance between the two parallel interfaces) has profound effect on the viscous stress on the moving surface when this ratio is around and above one. However, when the ratio is much below one, the effect of the slip patches are minor, even if the area fraction of slip patches are higher than 50 %. Obviously, the stick patches adjacent to the slip patches act as effective barriers, preventing the fluid velocity to increase near the surface with alternating stick and slip patches. The obtained results are scalable and applicable on all length scales, with an exception for narrow channels in the subnano regime, i.e. <1 nm where specific effects as the atomistic composition and the nanostructure of the wall as well as the interactions between the wall and the water molecules have an effect.