New dendrimer-peptide host-guest complexes: towards dendrimers as peptide carriers

Adamantyl urea and adamantyl thiourea modified poly(propylene imine) dendrimers act as hosts for N-terminal tert-butoxycarbonyl (Boc)-protected peptides and form chloroform-soluble complexes. Investigations with NMR spectroscopy show that the peptide is bound to the dendrimer by ionic interactions between the dendrimer outer shell tertiary amines and the C-terminal carboxylic acid of the peptide, and also through host-urea to peptide-amide hydrogen bonding. The hydrogen-bonding nature of the peptide-dendrimer interactions was further confirmed by using Fourier transform IR spectroscopy, for which the NH- and CO-stretch signals of the peptide amide moieties shift towards lower wavenumbers upon complexation with the dendrimer. Spatial analysis of the complexes with NOESY spectroscopy generally shows close proximity of the N-terminal Boc group of the peptide to the peripheral adamantyl groups on the dendrimer host. The influence of side-chain motif on interactions with the host is analyzed by using seven different N-Boc-protected tripeptides as guests for the dendrimer. Downfield shifts of up to 1.3 ppm were observed for the guest amide NH-proton signals. These shifts decreased with increasing 'bulkiness' of the amino acid side chains. Despite this, the dendrimer was capable of making multiple peptide-dendrimer complexes when presented with a library of seven peptides. The different peptides were all present in the host, which did not show specific preferences, and could be released under mild acidic conditions. These results show the general nature of the peptide-dendrimer interactions in the formation of either single- or multiple-peptide-dendrimer complexes.     

Nickel Nanoparticles Supported on Silica of Low Surface Area. Hydrogen Chemisorption and TPD and Catalytic Properties

Nickel metal nanoparticles supported on silica of low surface area (15 m² g^-1) were prepared by reduction of nickel acetate by hydrazine in aqueous medium. Their gas-phase stability and surface properties depended on thermal pre-treatment under H₂ or air atmosphere. Small nickel particles (<10 nm), in oxidized or reduced state, are strongly resistant to reductive or oxidative treatment respectively. For H₂-treated catalysts, H₂ chemisorption and TPD results suggested the occurrence of spillover hydrogen between the metal nickel phase and silica. For air then H₂ treated catalysts, hydrogen spillover seemed to involve the NiO phase. The activity of the catalysts in gas-phase benzene hydrogenation also depended on the thermal pre-treatment. Pre-calcined then reduced catalysts exhibited higher TOFs than non pre-calcined catalysts, suggesting that the presence of NiO phase may have influenced the hydrogenation process.     

Synthesis and characterization of (co)polymers containing a phosphonate function for use in dental composites

Novel monomers 1a, 1b, in which a phosphonate function is incorporated in both aromatic rings, were synthesized from the addition reaction of tetraisopropyl [2,2′-disulfanyl-5,5′-thiodiphenyl]-1,1′-diphosphonate and diisopropyl (2-sulfanylphenyl)-1-phosphonate with the glycidylmethacrylate. Free radical homo- and copolymerizations of phosphonate monomers containing methacrylate groups were first carried out in bulk and in THF solution. They offered (co)polymers for potential use in dental resins, in high yields and moderate to high inherent viscosities. The components and structure of the (co)polymers were confirmed by FTIR, SEC, ¹H, ³¹P NMR spectra.

Thermal analysis by using differential scanning calorimetry indicated an amorphous structure of the (co)polymers obtained by polymerization in solution. Upon UV-radiation the composite resins have been synthesized by cross-linking reaction.     

Oxidative dimerisation of propene to 1,5-hexadiene on Bi-Zn-O catalysts

The oxidative dimerisation of propene to 1,5-hexadiene has been investigated on Bi-Zn-O catalysts. The Bi₄₈ZnO₇₃ phase, observed in the catalysts calcined at 700 ° C is an active and selective catalyst for the formation of 1,5-hexadiene. The best catalytic performance (1,5-hexadiene selectivity 64%) has been obtained at 525 ° C, with a propene to oxygen ratio of 26, on a catalyst formed by Bi₄₈ZnO₇₃ with a small excess of ZnO.     

Sol—Gel Synthesis of Strontium-Doped Lanthanum Manganite

Strontium-doped lanthanum manganite powders were prepared using a peroxide acetate salt based solution. The stable sol was peptized by reacting ammonium hydroxide with the precursor solution. The amorphous dried gel powders exhibit a high energy level, due to their high cations coordination and small particles, to develop the perovskite phase. This crystalline phase development from powders containing monocarboxylate ligands was characterized by thermal analysis (TG, DTG, DTA), X-ray diffraction, and IR spectroscopy. The transformation from amorphous powders into a crystallized homogeneous oxycarbonate phase in a first stage corresponds to an exothermal DTA peak at 270°C. X-ray diffraction patterns and IR spectra showed similar behavior of the powders after complete organic removal, during the conversion into perovskite phase starting at approximately 630°C and achieved about 700°C and achieved about 700°C, as well as during the sintering process.     

Room temperature molten salts as lithium battery electrolyte

In the present study, are reported investigations obtained with the room temperature molten salt (RTMS) ethyl-methyl-imidazolium bis-(trifluoromethanesulfonyl)-imide (EMI-TFSI) in order to use it as solvent in lithium battery. The thermal stability, viscosity, conductivity and electrochemical properties are presented. A solution of 1m lithium bis-(trifluoromethanesulfonyl)-imide (LiTFSI) in EMI-TFSI has been used to test the electrolyte in a battery with LiCoO₂ and Li₄Ti₅O₁₂ as respectively cathode and anode materials. Cycling and power measurements have been obtained. The results have been compared with those obtained with a molten salt formulated with a different anion, BF₄⁻ and with a conventional liquid organic solvent EC/DMC containing LiTFSI. The 1m LiTFSI/EMI-TFSI electrolyte provides the best cycling performance: a capacity up to 106 mAh g⁻¹ is still delivered after 200 cycles, with 1C rate at 25 °C.     

Low‐Temperature Chemical Synthesis of High‐Purity Diacylglycerols (DAG) from Monoacylglycerols (MAG)

A chemical method was developed for low‐temperature synthesis of DAG from MAG followed by an easy purification procedure in order to obtain high‐purity DAG. Solvent‐assisted and solvent‐free reaction conditions were used, combined with different catalysts (sodium methoxide, p‐toluenesulfonic acid, methanesulfonic acid, and sulfuric acid). All reactions were performed at 35 and 70 °C. By increasing both acidity and polarity of the catalyst the equilibrium shifts towards the formation of DAG. When using sulfuric acid in solvent‐assisted condition at 70 °C, 88 % conversion was obtained after 20 min of reaction (77 % w/w DAG in the reaction mixture after evaporation of the solvent). After purifying by means of column chromatography, 96 % pure DAG were obtained. The overall yield of DAG was 81 %.     

A compact photomicroreactor design for kinetic studies of gas‐liquid photocatalytic transformations

A compact photomicroreactor assembly consisting of a capillary microreactor and small‐scale light emitting diodes was developed for the study of reaction kinetics in the gas‐liquid photocatalytic oxidation of thiophenol to phenyl disulfide within Taylor flow. The importance of photons was convincingly shown by a suction phenomenon due to the fast consumption of oxygen. Mass transfer limitations were evaluated and an operational zone without mass transfer effects was chosen to study reaction kinetics. Effects of photocatalyst loading and light sources on the reaction performance were investigated. Reaction kinetic analysis was performed to obtain reaction orders with respect to both thiophenol and oxygen based on heterogeneous and homogeneous experimental results, respectively. The Hatta number further indicated elimination of mass transfer limitations. Reaction rate constants at different photocatalyst loadings and different photon flux were calculated. Furthermore, the advantages of this photomicroreactor assembly for studying gas‐liquid photocatalytic reaction kinetics were demonstrated as compared with batch reactors. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2215–2227, 2015