Influence of Membrane Intrusion on Permeate‐Sided Pressure Drop During High‐Pressure Reverse Osmosis

By replacing thermal concentration processes, high‐pressure reverse osmosis has the potential to contribute to cost and energy savings regarding concepts for industrial water reuse. To provide a better understanding of the spiral‐wound element behavior during high‐pressure operation, this study focusses on the investigation of their performance by scrutinizing the crucial effect of the permeate‐sided pressure drop induced by membrane‐spacer interactions. The experiments show a considerable influence of membrane intrusion on the element performance with a strong dependence on the feed pressure.     

Water-Lubricated Ni-Based Composite(Ni-Al_2O_3,Ni-SiC and Ni-ZrO_2)Thin Film Coatings for Industrial Applications

In this work,pure nickel and Ni-based nanocomposite coatings(N1-Al_2O_3,Ni-SiC and Ni-ZrO_2) were produced on steel substrate by using pulse electrodeposition technique.The industrial performance tests were conducted to evaluate the wear resistance,corrosion resistance,adhesion strength and wettability behaviour of newly developed coatings.Rolling contact ball-on-disc tribometer was used to assess anti-wear behaviour of these coatings under waterlubricated contacts.The results showed that the wear- and corrosion resistance properties of nickel alumina and Ni-SiC composite coatings significantly improved than that of pure Ni and Ni-ZrO_2 coatings.The adhesion and wettability results of Ni-Al_2O_3 composite showed better performance when compared to the rest of the coatings.The effects of incorporating nanoparticles on the surface microstructure,interface adhesion and distribution of the particles were also investigated.The coatings were characterized by using scanning electron microscopy,X-ray diffraction analysis and 3D white light interferometry.The wear failure behaviour of these coatings was further examined by post-test surface observation under optical microscope.     

Polymer layered silicate nanocomposites

Polymers filled with low amounts of layered silicate dispersed at nanoscale level are most promising materials characterized by a combination of chemical, physical and mechanical properties that cannot be obtained with macro‐ or microscopic dispersions of inorganic fillers. Polymer layered silicate nanocomposites can be obtained by insertion of polymer molecules in the galleries between the layers of phyllosilicate. Here, hydrated alkaline or alkaline earth metal cations are hosted which neutralize the negative charge resulting from isomorphous substitutions of Mg or Al cations within the silicate. Insertion of polymer molecules to prepare “intercalation hybrids” can be carried out by replacing the water hydration molecules in the galleries by polymers containing polar functional groups, using the so called ion‐dipole method. A more general technique involves compatibilization of the silicate by intercalation of an organic molecule, typically an organic alkylammonium salt, that replaces the cations in the interlayer galleries to form an organically modified layered silicate (OLS). The aliphatic chain of the OLS favors the intercalation of any type of polymer. Intercalated or delaminated polymer‐silicate hybrids are obtained depending on whether the stack organization of the silicate layers is preserved or is lost, with single sheets being distributed in the polymer matrix. The methods currently used for preparing polymer layered silicate (PLS) nanocomposites are: in situ polymerization, from polymer solution, or from polymer melt. Although PLS nanocomposites have been known for a long time, it is the possibility of preparing them by melt intercalation of OLS in processing that is boosting the present interest in these materials and their properties. So far PLS nanocomposites have been characterized by X‐ray diffractometry, transmission electron microscopy, differential scanning calorimetry, and NMR. Published results on PLS nanocomposites are reviewed concerning their characterization and properties with particular reference to fire retardant behavior.     

New developments in fire retardant non‐halogen aromatic phosphates

Akzo Nobel Chemicals has recently introduced on the market an aromatic oligomeric phosphate (BDP) based on Bisphenol A. This product shows higher thermal and hydrolytic stability than other aryl phosphates. It provides similar or better fire retardant performance than an oligomeric phosphate (RDP) based on resorcinol. Fire retardant formulations with BDP based on polycarbonate/ABS plastic (PC/ABS) blend, polyphenylene oxide/high impact polystyrene (PPO/HIPS) blend, and HIPS alone show similar or better physical properties than those obtained with RDP. Upon thermal decomposition of the fire retarded polymers containing BDP, phosphorus tends to accumulate in the solid residue, a result which indicates that the primary fire retardant action of BDP is likely to occur in the condensed phase.     

Effects of mutations in the calcium-binding sites of recoverin on its calcium affinity: evidence for successive filling of the calcium binding sites

A molecule of the photoreceptor Ca²⁺-binding protein recoverincontains four potential EF-hand Ca²⁺-binding sites, of whichonly two, the second and the third, are capable of binding calciumions. We have studied the effects of substitutions in the second,third and fourth EF-hand sites of recoverin on its Ca²⁺-bindingproperties and some other characteristics, using intrinsic fluorescence,circular dichroism spectroscopy and differential scanning microcalorimetry.The interaction of the two operating binding sites of wild-typerecoverin with calcium increases the protein's thermal stability,but makes the environment around the tryptophan residues moreflexible. The amino acid substitution in the EF-hand 3 (E121Q)totally abolishes the high calcium affinity of recoverin, whilethe mutation in the EF-hand 2 (E85Q) causes only a moderatedecrease in calcium binding. Based on this evidence, we suggestthat the binding of calcium ions to recoverin is a sequentialprocess with the EF-hand 3 being filled first. Estimation ofCa²⁺-binding constants according to the sequential binding schemegave the values 3.7 x 10⁶ and 3.1 x 10⁵ M^–1 for thirdand second EF-hands, respectively. The substitutions in theEF-hand 2 or 3 (or in both the sites simultaneously) do notdisturb significantly either tertiary or secondary structureof the apo-protein. Amino acid substitutions, which have beendesigned to restore the calcium affinity of the EF-hand 4 (G160D,K161E, K162N, D165G and K166Q), increase the calcium capacityand affinity of recoverin but also perturb the protein structureand decrease the thermostability of its apo-form.     

Formation Energies of Antiphase Boundaries in GaAs and GaP: An ab Initio Study

Electronic and structural properties of antiphase boundaries in group III-V semiconductor compounds have been receiving increased attention due to the potential to integration of optically-active III-V heterostructures on silicon or germanium substrates. The formation energies of {110}, {111}, {112}, and {113} antiphase boundaries in GaAs and GaP were studied theoretically using a full-potential linearized augmented plane-wave density-functional approach. Results of the study reveal that the stoichiometric {110} boundaries are the most energetically favorable in both compounds. The specific formation energy γ of the remaining antiphase boundaries increases in the order of γ_{113} ≈ γ_{112} < γ_{111}, which suggests {113} and {112} as possible planes for faceting and annihilation of antiphase boundaries in GaAs and GaP.     

Characterizing SERCA Function in Murine Skeletal Muscles after 35–37 Days of Spaceflight

It is well established that microgravity exposure causes significant muscle weakness and atrophy via muscle unloading. On Earth, muscle unloading leads to a disproportionate loss in muscle force and size with the loss in muscle force occurring at a faster rate. Although the exact mechanisms are unknown, a role for Ca²⁺ dysregulation has been suggested. The sarco(endo)plasmic reticulum Ca²⁺ ATPase (SERCA) pump actively brings cytosolic Ca²⁺ into the SR, eliciting muscle relaxation and maintaining low intracellular Ca²⁺ ([Ca²⁺]_i). SERCA dysfunction contributes to elevations in [Ca²⁺]_i, leading to cellular damage, and may contribute to the muscle weakness and atrophy observed with spaceflight. Here, we investigated SERCA function, SERCA regulatory protein content, and reactive oxygen/nitrogen species (RONS) protein adduction in murine skeletal muscle after 35–37 days of spaceflight. In male and female soleus muscles, spaceflight led to drastic impairments in Ca²⁺ uptake despite significant increases in SERCA1a protein content. We attribute this impairment to an increase in RONS production and elevated total protein tyrosine (T) nitration and cysteine (S) nitrosylation. Contrarily, in the tibialis anterior (TA), we observed an enhancement in Ca²⁺ uptake, which we attribute to a shift towards a faster muscle fiber type (i.e., increased myosin heavy chain IIb and SERCA1a) without elevated total protein T-nitration and S-nitrosylation. Thus, spaceflight affects SERCA function differently between the soleus and TA.     

Development and Characterization of a Multiplex Assay to Quantify Complement-Fixing Antibodies against Dengue Virus

Antibodies capable of activating the complement system (CS) when bound with antigen are referred to as “complement-fixing antibodies” and are involved in protection against Flaviviruses. A complement-fixing antibody test has been used in the past to measure the ability of dengue virus (DENV)-specific serum antibodies to activate the CS. As originally developed, the test is time-consuming, cumbersome, and has limited sensitivity for DENV diagnosis. Here, we developed and characterized a novel multiplex anti-DENV complement-fixing assay based on the Luminex platform to quantitate serum antibodies against all four serotypes (DENV1-4) that activate the CS based on their ability to fix the complement component 1q (C1q). The assay demonstrated good reproducibility and showed equivalent performance to a DENV microneutralization assay that has been used to determine DENV serostatus. In non-human primates, antibodies produced in response to primary DENV1-4 infection induced C1q fixation on homologous and heterologous serotypes. Inter-serotype cross-reactivity was associated with homology of the envelope protein. Interestingly, the antibodies produced following vaccination against Zika virus fixed C1q on DENV. The anti-DENV complement fixing antibody assay represents an alternative approach to determine the quality of functional antibodies produced following DENV natural infection or vaccination and a biomarker for dengue serostatus, while providing insights about immunological cross-reactivity among different Flaviviruses.     

Influence of the post-deformation annealing heat treatment on the low-cycle fatigue of NiTi shape memory alloys

Shape memory alloys (SMA) suffer from the same impairing mechanisms experienced during cycling loading by classic alloys. Moreover, SMA fatigue behavior is greatly influenced by thermomechanical cycling through the zone of thermoelastic phase transformation, which is the basis of shape memory and superelasticity effects. Since the fatigue resistance of any material can be improved by an appropriate thermomechanical treatment, in the present work combined differential scanning calorimetry and microhardness testing were used to determine an optimum annealing temperature for the cold-worked Ni-50.1%Ti alloy. The optimization is based on the assumption that latent heat of transformation is proportional to the mechanical work generated by SMA upon heating, while material hardness is related to the yield stress of the material. It is supposed that an optimum trade-off in these two properties guarantees the best dimensional and functional stability of SMA devices. The level and stability of the mechanical work generated by the material during low-cycle fatigue testing are considered criteria for the material performance and thus of the validity of the proposed optimization procedure.     

Effect of experimental conditions on the parameters used for evaluating the performance of the catalyst Mo/Al2O3 in diesel soot combustion

The literature reported different studies of soot combustion reaction under very distinct experimental conditions, which can include different values of catalyst:soot weight ratios, gas flow and heating rates. Therefore, avoiding screening of innumerable catalysts or empirical experiments, this work aims to present a general methodology based on a statistical experimental design of experiments with soot combustion, evaluating different reaction conditions and parameters that can be used for any other similar study. In this way, the effect of experimental conditions on the parameters used for evaluating the performance of Mo/Al₂O₃, a promising system previously studied, and Pt/Al₂O₃, a notorious catalytic system, were studied by a complete factorial experimental design. The results have shown that the experimental conditions strongly interfere with the parameters used for evaluating the catalytic performance and then it may generate incorrect conclusions.The effects of interaction between different conditions on the activity and mainly on the selectivity of CO₂ permitted to explain the performance of catalysts on soot combustion and to distinguish different pathways of catalytic and non-catalytic reactions under specific reaction conditions.The most appropriate conditions for studying soot combustion seem to be high cat:soot ratios, low heating rates and high gas flow rates, which, according to this work, must be equal to: 95:1, 2 K min⁻¹ and 115 mL min⁻¹, respectively.