Calculating the external heat exchange and aerodynamic drag of plate-finned air coolers

Results are presented from an experimental study of heat exchange and pressure loss in plate-finned air coolers with different spacings of the fins.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 47, No. 3, pp. 368–372, September, 1984.     

Global analysis of the riverine transport of 90Sr and 37Cs

Atmospheric nuclear weapons explosions and large-scale nuclear accidents may contaminate large areas of land with the long-lived radionuclides 137Cs and 90Sr. The mobility and bioavailability of these radionuclides in the environment is dependent primarily on soil characteristics and changes significantly over time after fallout (1-4). Radioisotope concentrations in different rivers and at different times after fallout vary over 2-3 orders of magnitude. Many previous studies have concentrated on the interactions of radiocesium and radiostrontium with various environmental components, but there are currently no operative models fortheirtransport over large spatial areas. We collected time-series measurements of 90Sr and 137Cs in 25 major European and Asian rivers and (using digital data sets with global coverage) determined characteristics of each of the rivers' catchments. This work has established, for the first time, a quantitative link between riverine transport of these radioisotopes and catchment and soil characteristics at a global scale. A generalized predictive model accounting for time changes in river concentrations and variation in catchment characteristics is developed. This can be used to predict the long-term riverine transport of these radiologically important radionuclides following any large-scale nuclear incident in North America, Europe, or (European and Asian) Russia.     

High-transfer-rate high-capacity holographic disk data-storage system

We describe the design and implementation of a high-data-rate high-capacity digital holographic storage disk system. Various system design trade-offs that affect density and data-rate performance are described and analyzed. In the demonstration system that we describe, high-density holographic recording is achieved by use of high-resolution short-focal-length optics and correlation shift multiplexing in photopolymer disk media. Holographic channel decoding at a 1-Gbit/s data rate is performed by custom-built electronic hardware. A benchmark sustained optical data-transfer rate of 10 Gbits/s has been successfully demonstrated.     

Corrosion of Titanium-Aluminum Intermetallides. Part 2. Electrolytic Oxidation of γ‐TiAl,TiAl3, and α2‐Ti3Al in Sea Water

Potentiodynamic polarization, XRD, Auger electron spectroscopy, and scanning electron microscopy have been applied to determine the mechanisms of electrolytic corrosion of the intermetallides TiAl, TiAl₃, and ₂Ti₃Al in 3% NaCl solution with the addition of MgSO₄ in comparison with the corrosion of the pure metals (Al and Ti). There is comparatively high corrosion resistance in TiAl and Ti₃Al because of the protective action from thin films of rutile TiO₂. Evidence is obtained for the differences between these intermetallides from the appearance of pure titanium on deep anodic polarization (above +0.15 V for TiAl and +0.7 V for Ti₃Al): the aluminum and titanium enter the solution in the forms of Al³⁺ and TiO²⁺ and intermetallides dissolve rapidly. The final solid-state products from anodic oxidation in that case are rutile, magnesium aluminate, and also magnesium and sodium titanates. In addition to pure titanium, TiAl and ₂Ti₃Al as constructional materials may be recommended for use in sea water.     

Photofragment image analysis using the Onion-Peeling Algorithm

With the growing popularity of the velocity map imaging technique, a need for the analysis of photoion and photoelectron images arose. Here, a computer program is presented that allows for the analysis of cylindrically symmetric images. It permits the inversion of the projection of the 3D charged particle distribution using the Onion Peeling Algorithm. Further analysis includes the determination of radial and angular distributions, from which velocity distributions and spatial anisotropy parameters are obtained. Identification and quantification of the different photolysis channels is therefore straightforward. In addition, the program features geometry correction, centering, and multi-Gaussian fitting routines, as well as a user-friendly graphical interface and the possibility of generating synthetic images using either the fitted or user-defined parameters.

Program summary

Title of program: Glass OnionCatalogue identifier: ADRYProgram Summary URL:http://cpc.cs.qub.ac.uk/summaries/ADRYProgram obtainable from: CPC Program Library, Queen's University of Belfast, N. IrelandLicensing provisions: noneComputer: IBM PCOperating system under which the program has been tested: Windows 98, Windows 2000, Windows NTProgramming language used: Delphi 4.0Memory required to execute with typical data: 18 MwordsNo. of bits in a word: 32No. of bytes in distributed program, including test data, etc.: 9 911 434Distribution format: zip fileKeywords: Photofragment image, onion peeling, anisotropy parametersNature of physical problem: Information about velocity and angular distributions of photofragments is the basis on which the analysis of the photolysis process resides. Reconstructing the three-dimensional distribution from the photofragment image is the first step, further processing involving angular and radial integration of the inverted image to obtain velocity and angular distributions. Provisions have to be made to correct for slight distortions of the image, and to verify the accuracy of the analysis process.Method of solution: The “Onion Peeling” algorithm described by Helm [Rev. Sci. Instrum. 67 (6) (1996)] is used to perform the image reconstruction. Angular integration with a subsequent multi-Gaussian fit supplies information about the velocity distribution of the photofragments, whereas radial integration with subsequent expansion of the angular distributions over Legendre Polynomials gives the spatial anisotropy parameters. Fitting algorithms have been developed to centre the image and to correct for image distortion.Restrictions on the complexity of the problem: The maximum image size (1280×1280) and resolution (16 bit) are restricted by available memory and can be changed in the source code. Initial centre coordinates within 5 pixels may be required for the correction and the centering algorithm to converge. Peaks on the velocity profile separated by less then the peak width may not be deconvolved. In the charged particle image reconstruction, it is assumed that the kinetic energy released in the dissociation process is small compared to the energy acquired in the electric field. For the fitting parameters to be physically meaningful, cylindrical symmetry of the image has to be assumed but the actual inversion algorithm is stable to distortions of such symmetry in experimental images.Typical running time: The analysis procedure can be divided into three parts: inversion, fitting, and geometry correction. The inversion time grows approx. as R³, where R is the radius of the region of interest: for R=200 pixels it is less than a minute, for R=400 pixels less then 6 min on a 400 MHz IBM personal computer. The time for the velocity fitting procedure to converge depends strongly on the number of peaks in the velocity profile and the convergence criterion. It ranges between less then a second for simple curves and a few minutes for profiles with up to twenty peaks. The time taken for the image correction scales as R² and depends on the curve profile. It is on the order of a few minutes for images with R=500 pixels.Unusual features of the program: Our centering and image correction algorithm is based on Fourier analysis of the radial distribution to insure the sharpest velocity profile and is insensitive to an uneven intensity distribution. There exists an angular averaging option to stabilize the inversion algorithm and not to loose the resolution at the same time.     

Nanostructured artificial nacre

Finding a synthetic pathway to artificial analogs of nacre and bones represents a fundamental milestone in the development of composite materials. The ordered brick-and-mortar arrangement of organic and inorganic layers is believed to be the most essential strength- and toughness-determining structural feature of nacre. It has also been found that the ionic crosslinking of tightly folded macromolecules is equally important. Here, we demonstrate that both structural features can be reproduced by sequential deposition of polyelectrolytes and clays. This simple process results in a nanoscale version of nacre with alternating organic and inorganic layers. The macromolecular folding effect reveals itself in the unique saw-tooth pattern of differential stretching curves attributed to the gradual breakage of ionic crosslinks in polyelectrolyte chains. The tensile strength of the prepared multilayers approached that of nacre, whereas their ultimate Young modulus was similar to that of lamellar bones. Structural and functional resemblance makes clay- polyelectrolyte multilayers a close replica of natural biocomposites. Their nanoscale nature enables elucidation of molecular processes occurring under stress.     

dOpenCL: Towards uniform programming of distributed heterogeneous multi-/many-core systems

Modern computer systems become increasingly distributed and heterogeneous by comprising multi-core CPUs, GPUs, and other accelerators. Current programming approaches for such systems usually require the application developer to use a combination of several programming models (e.g., MPI with OpenCL or CUDA) in order to exploit the system’s full performance potential. In this paper, we present dOpenCL (distributed OpenCL)—a uniform approach to programming distributed heterogeneous systems with accelerators. dOpenCL allows the user to run unmodified existing OpenCL applications in a heterogeneous distributed environment. We describe the challenges of implementing the OpenCL programming model for distributed systems, as well as its extension for running multiple applications concurrently. Using several example applications, we compare the performance of dOpenCL with MPI + OpenCL and standard OpenCL implementations.     

Electromagnetic wave scattering from the sea surface in the presence of wind wave patterns

The study is concerned with electromagnetic wave (EM) scattering by a random sea surface in the presence of coherent wave patterns. The coherent patterns are understood in a broad sense as the existence of certain dynamical coupling between linear Fourier components of the water wave field. We show that the presence of weakly nonlinear wave patterns can significantly change the EM scattering compared to the case of a completely random wave field. Generalizing the Random Phase Approximation (RPA) we suggest a new paradigm for EM scattering by a random sea surface.

The specific analysis carried out in the paper synthesizes the small perturbation method for EM scattering and a weakly nonlinear approach for wind wave dynamics. By investigating, in detail, two examples of a random sea surface composed of either Stokes waves or horse-shoe (‘crescent-shaped’) patterns the mechanism of the pattern effect on scattering is revealed. Each Fourier harmonic of the scattered EM field is found to be a sum of contributions due to different combinations of wave field harmonics. Among these ‘partial scatterings’ there are phase-dependent ones and, therefore, the intensity of the resulting EM harmonic is sensitive to the phase relations between the wind wave harmonics. The effect can be interpreted as interference of partial scatterings due to the co-existence of several phase-related periodic scattering grids. A straightforward generalization of these results enables us to obtain, for a given wind wave field and an incident EM field, an a priori estimate of whether the effects due to the patterns are significant and the commonly used RPA is inapplicable. When the RPA is inapplicable, we suggest its natural generalization by re-defining the statistical ensemble for water surface. First, EM scattering by an ‘elementary’ constituent pattern should be considered. Each such scattering is affected by the interference because the harmonics comprising the pattern are dynamically linked. Then, ensemble averaging, which takes into account the distribution of the pattern parameters (based on the assumption that the phases between the patterns are random), should be carried out. It is shown that, generally, this interference does not vanish for any statistical ensemble due to dynamical coupling between water wave harmonics. The suggested RPA generalization takes into account weak non-Gaussianity of water wave field m contrast to the traditional RPA which ignores it.