Decay of dinitroaniline herbicides and organophosphorus insecticides during brewing of lager beer

This article examines the fate of four pesticides that can be present during the brewing of lager beer. For this purpose, malted barley was spiked at 2 mg/kg with pendimethalin and trifluralin (dinitroaniline herbicides) and fenitrothion and malathion (organophosphorus insecticides). Analyses of pesticide residues were carried out by a gas chromatograph with an electron capture detector, and their identity was confirmed by gas chromatography-mass spectrometry. Cleanup was necessary for the malt and spent grain samples. Beginning with mashing and ending with the final product 4 months later, various samples (spent grain, sweet wort, brewer wort, and beer) were taken to determine the concentration of the targeted residual pesticides during the various beer making phases. In all cases, the residual levels recorded in sweet wort sampled after the mashing phase were below the respective maximum residue limits established by Spanish legislation for barley. Significant proportions of pesticide residues (17 to 40%) were retained on the spent grain. Applying the standard first-order kinetics equation (r > 0.91), the half-lives obtained for the four compounds during the storage of the spent grain (3.5 months) varied from 138 days (fenitrothion) to 192 days (malathion and pendimethalin). Herbicide residues practically disappeared (<0.3%) after wort boiling, whereas the percentages of the remaining insecticides, fenitrothion and malathion, ranged from 3.5 to 4.3%, respectively, at this time. No residues of dinitroaniline compounds were detected in young beer, whereas there was a significant reduction in fenitrothion (58%) and malathion (71%) residues during fermentation. Lagering and filtering processes also reduced the content of the organophosphorus insecticides (33 to 37%). Finally, after the storage period (3 months), the content of fenitrothion was reduced by 75%, with malathion residues being below its detection limit.     

Titration force microscopy on supported lipid bilayers

The use of chemically modified atomic force microscopy (AFM) probes allows us to measure the surface charges of supported planar lipid bilayers with high sensitivity through the force spectroscopy operation mode. By controlling the chemistry of the tip, we can perform a classical analytical chemistry titration where the titration agent is a weak acid (attached to the AFM tip) with the particularity of being performed in surface rather than in solution and, especially, at the nanometric scale. Thus, the AFM tip acts as a real "nanosensor". The approaching curves of the force plots reveal that electrostatic interactions between the tip and the supported membrane play a key role. Besides, the plot of the adhesion force (measured from the retracting curve of the force plots) versus pH displays a nonsigmoidal shape with a peak in the adhesion force attributed to high-energy hydrogen bonds. One of these peaks corresponds to the pKa of the surface under study and the other to the pKa of the titrating probe attached to the tip.     

Mineralization of flumequine in acidic medium by electro-Fenton and photoelectro-Fenton processes

The mineralization of flumequine, an antimicrobial agent belonging to the first generation of synthetic fluoroquinolones which is detected in natural waters, has been studied by electrochemical advanced oxidation processes (EAOPs) like electro-Fenton (EF) and photoelectro-Fenton (PEF) with UVA light. The experiments were performed in a cell containing a boron-doped diamond (BDD) anode and an air-diffusion cathode to generate H₂O₂ at constant current. The Fe²⁺ ion added to the medium increased the solubility of the drug by the formation of a complex of intense orange colour and also reacted with electrogenerated H₂O₂ to form hydroxyl radical from Fenton reaction. Oxidant hydroxyl radicals at the BDD surface were produced from water oxidation. A partial mineralization of flumequine in a solution near to saturation with optimum 2.0 mM Fe²⁺ at pH 3.0 was achieved by EF. The PEF process was more powerful, giving an almost total mineralization with 94-96% total organic carbon removal. Increasing current accelerated both treatments, but with decreasing mineralization current efficiency. Comparative treatments using a real wastewater matrix led to similar degradation degrees. The kinetics for flumequine decay always followed a pseudo-first-order reaction and its rate constant, similar for both EAOPs, raised with increasing current. Generated carboxylic acids like malonic, formic, oxalic and oxamic acids were quantified by ion-exclusion HPLC. Fe(III)-oxalate and Fe(III)-oxamate complexes were the most persistent by-products under EF conditions and their quicker photolysis by UVA light explains the higher oxidation power of PEF. The release of inorganic ions such as F⁻, NO₃⁻ and in lesser extent NH₄⁺ was followed by ionic chromatography.     

Hepatic ultrastructure in a neonatal piglet model of intestinal failure-associated liver disease (IFALD)

This study was designed to evaluate liver disease in neonatal piglets with surgical short bowel syndrome causing intestinal failure with partial parenteral nutrition dependence. The short bowel piglets had 75% surgical resection of distal small intestine, including all ileum and cecum, and were compared with sham controls, without resection, and to healthy sow-reared controls. After 18 days of combined parenteral and enteral nutrition in short bowel and sham piglets, liver tissue was collected for quantitative and semi-quantitative histological and ultrastructural evaluation. The short bowel piglets developed biochemical and histological cholestasis, not observed in sham and control piglets. Ultrastructural examination revealed bile canaliculus dilation with bile plugging, microvillus flattening and disappearance, but without abnormalities of the pericanalicular zone. Interestingly, these data are similar to bile canaliculus changes seen in human neonates with IFALD supporting an initial consideration of this model to elucidate the pathogenesis of IFALD.     

Effect of olive leaves feeding on phenolic composition and lipolytic volatile profile in goat milk

The aim of this study was to evaluate phenolic composition, antioxidant potential, and lipolytic events in raw milk obtained from goat fed a dietary supplementation with olive leaves (OL), a by-product of the olive oil production chain. For this purpose, 30 Saanen goats were randomly allocated into 2 groups of 15 goats each: the control group received a standard diet that was prepared by taking into account the nutritional needs of lactating goats, whereas the experimental group (EG) was fed with an OL-supplemented diet (10% on a dry matter basis). At the end of the 30 d of the trial, the individual milk samples were collected and immediately analyzed for total phenolic content and antioxidant activity (AOA). Subsequently, the individual phenolic compounds have been identified and quantified through an ultra-high-performance liquid chromatography system and a characterization of free fatty acids released in milk has been performed. The results showed a positive effect of dietary OL supplementation in improving total phenolic content and AOA; furthermore, 19 phenolic compounds, including phenolic acids, flavonoids, simple phenols, and secoiridoids, have been identified in EG milk. In addition to this, a reduced accumulation of free fatty acids has been found in EG milk, and this finding leads us to hypothesize an inhibitory action of the identified phenolic compounds toward the enzymes responsible for lipolytic events. The use of the molecular docking approach verified the interactions, defining a fairly interesting framework for cinnamic acid, which should be able to noncovalently bind these enzymes, interfering with the recruitment of the substrate and therefore, slowing down their hydrolytic activity. In any case, this information will be subjected to in vitro evaluations for an accurate characterization of the biochemical mechanisms that can be established in milk naturally enriched with bioactive compounds.     

Rubber Particles from Tires Out of Use as Toughness Modifiers of Epoxy-Based Thermosets

Rubber particles from tires out of use (TOU) were used to modify an epoxy-based thermoset. The effect of size and particle content were evaluated. Three bending point and Charpy tests were carried out to study the mechanical behavior of the materials. A steady decrease in the critical stress intensity factor, K_Ic, with the content of TOU was observed, being attributed to the fact that the particles might also act as defects in the polymer matrix. Fractographic analysis confirmed that filled specimens showed localized shear yielding at the end of the particles along the crack propagation direction. No signs of cavitation mechanism were found on the surfaces of fracture, evidencing an extraordinary interfacial adhesion. The total energy absorbed at break increased as the size of TOU particles decreased, pointing out that particle size is crucial for the performance of these materials. Matrix yielding and plastic deformation were considered to be the main toughness mechanisms.     

Electrochemical oxidation of methyl orange azo dye at pilot flow plant using BDD technology

Solutions of methyl orange azo dye were degraded by electrochemical oxidation using a 3 L flow plant with a boron-doped diamond (BDD)/stainless steel cell operating at constant current density, ambient temperature and liquid flow rate of 12 L min^?1. A 2³ factorial design considering the applied current density, azo dye concentration and electrolysis time as variable independents was used to analyze the process by response surface methodology. LC–MS analysis revealed the formation of seven oxidation products from the cleavage of the NN group of the dye, followed by deamination, formation of a nitro group and/or desulfonation of the resulting aromatics.     

Effect of Amplicon Length in Propidium Monoazide Quantitative PCR for the Enumeration of Viable Cells of Salmonella in Cooked Ham

Real-time PCR-based methods have been frequently used to detect and enumerate foodborne pathogens. However, these techniques have a major drawback since they cannot differentiate between DNA from live and dead cells. In this study, we developed a propidium monoazide (PMA)-based PCR method to detect and enumerate viable Salmonella cells in the presence of high number of dead cells (up to 10⁸ CFU/g) in cooked ham. Three different specific PCR targets differing in length (95, 285, and 417 bp) were tested. We found that the inhibition effect was dependent on the PCR amplification product length, and only the longer product achieved suppression of 10⁸ CFU/g of heat-killed cells. SYBR^® Green and TaqMan^® chemistries were compared to develop a highly efficient PMA-quantitative PCR system targeting the 417-bp fragment. Both chemistries showed similar detection (10³ CFU/g) and quantification limits (10⁴ CFU/g), but TaqMan^® assay showed higher efficiency (98.6 %) than SYBR^® Green assay (92.8 %). PMA-quantitative PCR assay developed is a rapid method for the selective detection and enumeration of viable Salmonella cells with further application in postprocessed meat products and safe shelf-life studies.     

Characterisation of charge voltage of lead‐acid batteries: application to the charge control strategy in photovoltaic systems

In stand‐alone photovoltaic (PV) systems, charge controllers prevent excessive battery overcharge by interrupting or limiting the current flow from the PV array to the battery when the battery becomes fully charged. Charge regulation is most often accomplished by limiting the battery voltage to a predetermined value or cut‐off voltage, higher than the gassing voltage. These regulation voltages are dependent on the temperature and battery charge current. An adequate selection of overcharge cut‐off voltage for each battery type and operating conditions would maintain the highest battery state of charge without causing significant overcharge thus improving battery performance and reliability. To perform this work, a sample of nine different lead‐acid batteries, typically used in stand‐alone PV systems including vented and sealed batteries with 2 V cells and monoblock configurations have been selected. This paper presents simple mathematical expressions fitting two charge characteristic voltages: the gassing voltage (V_g) and the end‐of charge voltage (V_fc) as function of charge current and temperature for the tested batteries. With these expressions, we have calculated V_g and V_fc at different current rates. An analysis of the different values obtained is presented here focusing in the implication in control strategies of batteries in stand‐alone PV systems. Copyright © 2006 John Wiley & Sons, Ltd.     

Establishing In-House Cutoffs of CSF Alzheimer’s Disease Biomarkers for the AT(N) Stratification of the Alzheimer Center Barcelona Cohort

Background: Clinical diagnosis of Alzheimer’s disease (AD) increasingly incorporates CSF biomarkers. However, due to the intrinsic variability of the immunodetection techniques used to measure these biomarkers, establishing in-house cutoffs defining the positivity/negativity of CSF biomarkers is recommended. However, the cutoffs currently published are usually reported by using cross-sectional datasets, not providing evidence about its intrinsic prognostic value when applied to real-world memory clinic cases. Methods: We quantified CSF Aβ1-42, Aβ1-40, t-Tau, and p181Tau with standard INNOTEST^® ELISA and Lumipulse G^® chemiluminescence enzyme immunoassay (CLEIA) performed on the automated Lumipulse G600II. Determination of cutoffs included patients clinically diagnosed with probable Alzheimer’s disease (AD, n = 37) and subjective cognitive decline subjects (SCD, n = 45), cognitively stable for 3 years and with no evidence of brain amyloidosis in 18F-Florbetaben-labeled positron emission tomography (FBB-PET). To compare both methods, a subset of samples for Aβ1-42 (n = 519), t-Tau (n = 399), p181Tau (n = 77), and Aβ1-40 (n = 44) was analyzed. Kappa agreement of single biomarkers and Aβ1-42/Aβ1-40 was evaluated in an independent group of mild cognitive impairment (MCI) and dementia patients (n = 68). Next, established cutoffs were applied to a large real-world cohort of MCI subjects with follow-up data available (n = 647). Results: Cutoff values of Aβ1-42 and t-Tau were higher for CLEIA than for ELISA and similar for p181Tau. Spearman coefficients ranged between 0.81 for Aβ1-40 and 0.96 for p181TAU. Passing–Bablok analysis showed a systematic and proportional difference for all biomarkers but only systematic for Aβ1-40. Bland–Altman analysis showed an average difference between methods in favor of CLEIA. Kappa agreement for single biomarkers was good but lower for the Aβ1-42/Aβ1-40 ratio. Using the calculated cutoffs, we were able to stratify MCI subjects into four AT(N) categories. Kaplan–Meier analyses of AT(N) categories demonstrated gradual and differential dementia conversion rates (p = 9.815⁻²⁷). Multivariate Cox proportional hazard models corroborated these findings, demonstrating that the proposed AT(N) classifier has prognostic value. AT(N) categories are only modestly influenced by other known factors associated with disease progression. Conclusions: We established CLEIA and ELISA internal cutoffs to discriminate AD patients from amyloid-negative SCD individuals. The results obtained by both methods are not interchangeable but show good agreement. CLEIA is a good and faster alternative to manual ELISA for providing AT(N) classification of our patients. AT(N) categories have an impact on disease progression. AT(N) classifiers increase the certainty of the MCI prognosis, which can be instrumental in managing real-world MCI subjects.