Approximate feedback linearization of discrete-time non-linear systems using virtual input direct design

The design of feedback-linearization and poles-placement controllers for discrete-time non-linear plants, using Input/Output/State measurements only, is typically addressed via indirect design. In this paper we propose the use of a new technique, based on a Virtual Input Direct Design (VID²) approach. The main feature of such a technique is to reduce the control design problem into a standard non-linear mapping approximation problem, without calling for the preliminary construction of an appropriate model of the plant. As compared with the existing methods, the new one requires less computational effort, while taking full advantage of the non-linear approximation software tools already available. In this paper, the new method is described, a simple theoretical analysis is given, and some numerical examples are presented.     

Computing the energy balance of a statue of bronze: The San Marco's horses as a case study

The energy balance is discussed for the complex case of bronze or marble statuary horses and particularly the four horses of San Marco in Venice. Having computed the coefficient of exchange between bronze and the atmosphere, the daytime overheating is evaluated for different seasons and orientations of the statues. The equations can be solved with reasonable approximation and both the past and future overheatings can be evaluated as a function of the growing surface weathering and blackening. Therefore, the present analysis points out the chief characteristics of both the diurnal cycle and the variation over the centuries of the response of the bronzes to atmospheric variables.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Transmission line routing for reduced external field disturbance

When immersed in a disturbing electromagnetic field, electronic systems are subject to interference due to the energy injected by the external field into the system through the electronic units and, especially, through the transmission lines connecting units one another. The issue of reducing the unwanted energy injection through connecting transmission lines is addressed in this contribution from the point of view of the routing, i.e. of the disposition of the connecting lines that minimizes the injection. The problem is formulated as an optimization problem, dealt with by the simulated annealing minimization technique combined with an efficient way of computing the field coupling to the lines. Results are reported for various cases, and the relation between the characteristics of the interfering field and the efficiency of the reduction is discussed.     

A panoramic view and swot analysis of artificial intelligence for achieving the sustainable development goals by 2030: progress and prospects

Applied Intelligence - The17 Sustainable Development Goals (SDGs) established by the United Nations Agenda 2030 constitute a global blueprint agenda and instrument for peace and prosperity...     

Optimal configuration of Energy-Efficient Ethernet

The IEEE 802.3az standard provides a new low power mode that Ethernet network interfaces can use to save energy when there is no traffic to transmit. Simultaneously with the final standard approval, several algorithms were proposed to govern the physical interface state transition between the normal active mode and the new low power mode. In fact, the standard leaves this sleeping algorithm unspecified to spur competition among different vendors and achieve the greatest energy savings. In this paper, we try to bring some light to the most well known sleeping algorithms, providing mathematical models for the expected energy savings and the average packet delay inflicted on outgoing traffic. We will then use the models to derive optimum configuration parameters for them under given efficiency constraints.     

In Vitro Characterization of Human CD24hiCD38hi Regulatory B Cells Shows CD9 Is Not a Stable Breg Cell Marker

Regulatory B (Breg) cells are endowed with immune suppressive functions. Various human and murine Breg subtypes have been reported. While interleukin (IL)-10 intracellular staining remains the most reliable way to identify Breg cells, this technique hinders further essential functional studies. Recent findings suggest that CD9 is an effective surface marker of murine IL-10 competent Breg cells. However, the stability of CD9 and its relevance as a unique marker for human Breg cells, which have been widely characterized as CD24^hiCD38^hi, have not been investigated. Here, we demonstrate that CD9 expression is sensitive to in vitro B cell stimulations. CD9 expression could either be re-expressed or downregulated in purified CD9-negative B cells and CD9-positive B cells, respectively. We found no significant differences in the Breg differentiation capacity of the CD9-negative and CD9-positive B cells. Furthermore, CD9-positive B cells co-express CD40 and CD86, suggesting their nature as B cell activation or co-stimulatory molecules, rather than regulatory ones. Therefore, we report the relatively unstable CD9 as a distinct surface molecule, indicating the need for further research for a more reliable marker to purify human Breg cells.     

Styrene-butadiene branched star-shaped asphalt modifiers: Synthesis and mechanical characterization

Abstract

The synthesis and the corresponding characterization of styrene-butadiene (SB), branched, star-shaped copolymers was investigated as part of a research project on asphalt modification using polymers with precise molecular structures. The method of anionic polymerization was followed to prepare samples of block copolymers of SB, a synthesis method that controls chain-architecture, molecular weight distribution, monomer distribution, and the average molecular weight. The research studies are the synthesis of block copolymers including linear, three- and four-arms constructs, depending on the coupling agent used. The techniques of nuclear magnetic resonance (1NMR), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and rheology were carried out to characterize the copolymers. From the results of the 1NMR, DSC, and GPC analyses, all star-shaped copolymers investigated showed a similar block copolymer composition. Furthermore, the rheological behavior of one of the synthesized star-shaped copolymers was nearly the same as a four-branched commercial copolymer. Rheologically, the four-arm block copolymer sample had the largest storage modulus (G′) among the branched copolymers synthetized, indicating that such architecture produces a highly structured material. In regard to polymer-modified asphalt formulations, the three-branched copolymer architecture yielded better elastic behavior than the four-branch version. In summary, the findings of this investigation provide new insight about a polymer system that may offer advantages in industrial asphalt paving applications.     

Coverage and invariability in fuzzy systems

This paper presents a new complex system systemic. Here, we are working in a fuzzy environment, so we have to adapt all the previous concepts and results that were obtained in a non-fuzzy environment, for this fuzzy case. The direct and indirect influences between variables will provide the basis for obtaining fuzzy and/or non-fuzzy relationships, so that the concepts of coverage and invariability between sets of variables will appear naturally. These two concepts and their interconnections will be analyzed from the viewpoint of algebraic properties of inclusion, union and intersection (fuzzy and non-fuzzy), and also for the loop concept, which, as we shall see, will be of special importance.