A global model for residential energy use: Uncertainty in calibration to regional data

Uncertainties in energy demand modelling allow for the development of different models, but also leave room for different calibrations of a single model. We apply an automated model calibration procedure to analyse calibration uncertainty of residential sector energy use modelling in the TIMER 2.0 global energy model. This model simulates energy use on the basis of changes in useful energy intensity, technology development (AEEI) and price responses (PIEEI). We find that different implementations of these factors yield behavioural model results. Model calibration uncertainty is identified as influential source for variation in future projections: amounting 30% to 100% around the best estimate. Energy modellers should systematically account for this and communicate calibration uncertainty ranges.     

Concentration of phenolic compounds from apple pomace extracts by nanofiltration at lab and pilot scale with a techno‐economic assessment

Apple pomace can be used as resource for the extraction of phenolic compounds with antioxidant properties. Pressing of apple in juice and pomace at lab scale in open air (aerobic) and under N₂ atmosphere (anaerobic) showed a recovery of phenolic compounds of 85% in juice and pomace after anaerobic pressing, compared to 43% after aerobic pressing, indicating loss of phenolic compounds by oxidation and the advantage of anaerobic over aerobic pressing. After a membrane screening and concentration test at lab scale, the commercial nanofiltration membrane NFX was selected to concentrate phenolic compounds in an ethanol : water extract of apple pomace. At pilot scale, the concencentration of 10 selected phenolic compounds and quinic acid increased from 59.5 mg/L in the ethanol : water extract to 1256.1 mg/L in the final retentate, that is, by a factor 21.1. The volume of the crude extract was reduced by a factor of 28.5 during the filtration, indicating some loss of phenolic compounds during pilot testing due to membrane fouling or oxidation of polyphenols. The pilot concentration test using a spiral‐wound membrane module showed good flux and concentration of phenolic compounds, indicating the technical feasibility of membrane technology for efficient concentration of polyphenols in an ethanol : water extraction solvent. Unfortunately, the extraction and concentration process was not economically feasible under the assumptions made.

Practical applications

The valorization of food waste for the production of high‐added value products is an increasingly hot topic. Phytochemicals are present in relatively low concentration in the fruit matrix, and concentration in the extraction solvent is necessary to develop an industrially relevant process. In this study, membrane filtration was selected for concentration due to its low energy consumption and mild processing conditions compared to other technologies. Membrane screening and testing at lab and pilot scale with techno‐economic assessment can be used by food and nutraceutical industries to evaluate membrane technology for concentration of phytochemicals extracted from agroindustrial by‐products.     

RAFT-mediated synthesis of cationic poly[(ar-vinylbenzyl)trimethylammonium chloride] brushes for quantitative DNA immobilization

The synthesis of cationic poly[(ar-vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was achieved via reversible addition-fragmentation chain transfer (RAFT) polymerization and used for quantitative DNA immobilization. Initially, silicon surfaces were modified with RAFT chain transfer agent by utilizing an amide reaction involving a silicon wafer modified with allylamine and 4-cyanopentanoic acid dithiobenzoate (CPAD). Poly(VBTAC) brushes were then prepared via RAFT-mediated polymerization from the surface immobilized CPAD. Various characterization techniques including ellipsometry, X-ray photoelectron spectroscopy, grazing angle-Fourier transform infrared spectroscopy, atomic force microscopy and contact-angle goniometer were used to characterize the immobilization of CPAD on the silicon wafer and the subsequent polymer formation. The addition of free CPAD was required for the formation of well-defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. Moreover, from atomic force microscopy and ellipsometry measurements, it was also determined that the density of immobilized DNA on the cationic poly(VBTAC) brushes can be quantitatively controlled by adjusting the solution concentration.     

‘Fairy Chimney’‐Shaped Tandem Metamaterials as Double Resonance SERS Substrates

A highly tunable design for obtaining double resonance substrates to be used in surface‐enhanced Raman spectroscopy is proposed. Tandem truncated nanocones composed of Au‐SiO₂‐Au layers are designed, simulated and fabricated to obtain resonances at laser excitation and Stokes frequencies. Surface‐enhanced Raman scattering experiments are conducted to compare the enhancements obtained from double resonance substrates to those obtained from single resonance gold truncated nanocones. The best enhancement factor obtained using the new design is 3.86 × 10⁷. The resultant tandem structures are named after “Fairy Chimneys” rock formation in Cappadocia, Turkey.     

CIRCUMFERENTIAL CRACK PROBLEM FOR AN FGM CYLINDER UNDER THERMAL STRESSES

The main objective of this study is to determine the stress intensity factors associated with a circumferential crack in a thin-walled cylinder subjected to quasi-static thermal loading. The cylinder is assumed to be a functionally graded material. In order to make the problem analytically tractable, the thin-walled cylinder is modeled as a layer on an elastic foundation whose thermal and mechanical properties are exponential functions of the thickness coordinate. Hence a plane strain crack problem is obtained. First temperature and thermal stress distributions for a crack-free layer are determined. Then using these solutions, the crack problem is reduced to a local perturbation problem where the only nonzero loads are the crack surface tractions. Both internal and edge cracks are considered. Stress intensity factors are computed as functions of crack geometry, material properties, and time.     

Effect of intrauterine dextrose or antibiotic therapy on reproductive performance of lactating dairy cows diagnosed with clinical endometritis

The objectives of this study were to assess the responses to treatments (clinical cure and cow survival 14 d posttherapy) of cows with clinical endometritis (CE) that received intrauterine infusion of a hypertonic solution of 50% dextrose (DEX) or subcutaneous ceftiofur crystalline free acid (CCFA) and subsequent pregnancy per artificial insemination (P/AI) in cows with CE compared with cows without CE. Cows (n=760) from 2 dairy herds were screened for CE using vaginoscopy and measurement of cervix diameters [exam 1; 26±3 d in milk (DIM)]. Cows with vaginal discharge scores of 2 or 3 (scale 0-3) were stratified by parity and randomly allocated into 1 of 3 treatment groups: (1) intrauterine infusion (～200 mL) of 50% DEX solution (n=79); (2) 6.6 mg/kg single-dose of subcutaneous administration of CCFA (n=75); or (3) untreated control animals (CON, n=83). Fourteen days posttherapy (at 40±3 DIM), cows with CE were re-examined (exam 2; 40±3 DIM) to assess the response to treatments. All cows were presynchronized with 2 injections of PGF(2α) given 14 d apart (starting at 26±3 DIM) followed by Ovsynch (OV; GnRH-7 d-PGF-56 h-GnRH 16 h-timed-AI) 12 to 14 d later. Cows displaying signs of standing estrus any time during the protocol were inseminated, whereas the remaining cows were subjected to timed AI 16 h after the second GnRH of OV. Pregnancy diagnosis was performed via transrectal ultrasonography at 39±3d post-AI followed by pregnancy reconfirmation 30 d after the first pregnancy diagnosis. Uterine swabs revealed that Arcanobacterium pyogenes and Escherichia coli were the most predominant bacteria isolated at the time of treatments. Mortality within 14 d posttherapy was not different among treatment groups. Cows with CE had greater cervical diameter at exam 1 and decreased P/AI compared with cows without CE. Treatment with CCFA or DEX increased the proportion of cows with clear vaginal discharge (score 0; clinical cure) 14 d posttherapy compared with CON cows. Pregnancy per AI from DEX (29.8±4%) cows tended to differ from that of CON (21.1±4%) or CCFA cows (19.7±4%), but it resulted in similar P/AI as those cows without CE (39.1±2%). The use of intrauterine DEX alone or as an adjunct of antibiotic therapy for the treatment of CE needs further investigation.     

Exogenous mammalian sex hormones mitigate inhibition in growth by enhancing antioxidant activity and synthesis reactions in germinating maize seeds under salt stress

BACKROUND: Mammalian sex hormones (MSH)—progesterone, β‐estradiol and androsterone—enhance plant growth and development by stimulating significant morphological and biochemical parameters under normal conditions. However, there is no report regarding their effects on plants exposed to environmental stress conditions. Therefore, the present study was focused on elucidating the possible positive effects of MSH on seedling growth, antioxidant activity and synthesis reactions in maize seeds exposed to salt stress, one of the most important environmental stresses. For this purpose, the various concentrations (10^?6, 10^?8, 10^?10 and 10^?12 mol L^?1) of MSH were studied. RESULTS: Salinity (100 mmol L^?1 NaCl) significantly reduced root length and seedling height, whereas MSH treatment significantly ameliorated the adverse effects of salinity on root length and seedling height. On the other hand, although salinity increased soluble protein, soluble sugar and proline content in 7‐day‐old maize seedlings, these were higher in MSH‐treated seedlings. Similarly, MSH treatment augmented superoxide dismutase, peroxidase and catalase activities under salt stress, whereas it decreased superoxide production and lipid peroxidation level. The most favorable concentrations were determined as 10^?8 mol L^?1 for progesterone and β‐estradiol and 10^?10 mol L^?1 for androsterone. CONCLUSION: Exogenous MSH application was found to have an important ameliorative effect on growth of seeds exposed to salt stress by stimulating antioxidant activity and synthesis reactions. This is the first study investigating the effects of MSH on germination of seeds exposed to stress conditions. Copyright © 2011 Society of Chemical Industry     

Complementary integrated circuits on plastic foil using inkjet printed n- and p-type organic semiconductors: Fabrication,characterization, and circuit analysis

Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS–PEN) and a rylene carboxylic diimide derivative for p- and n-channel thin-film transistors (TFTs) were fabricated on flexible foils. The so-called staggered TFT configuration is used, meaning that the semiconductors layers are deposited last. The work-function of the injecting gold electrodes were modified using several self-assembled monolayers (SAMs). For optimized contacts the mobility of the n- and p-channel TFTs was 0.5 cm²/Vs and 0.2 cm²/Vs, respectively. Strongly degraded performance is obtained when the n-channel material was printed on contacts optimized for the p-channel TFT, and vice versa. This illustrates that for CMOS circuits we need careful work-function engineering to allow proper injection for both electrons and holes. We show for the first time that by using a bimolecular mixture for the SAM we can systematically vary the work function, and demonstrate how this affects the performance of discrete n-type and p-type transistors, as well as CMOS inverters and ring oscillators. Under optimal processing conditions we realized complementary 19-stage ring oscillators with 10 μs stage delay operating at 20 V.