X-ray and electron microscopical studies of thin films of (Cd1−xZnx)S solid solution

A series of (Cd_1–x Zn _x )S powders phosphors and thin layers prepared by thermal evaporation of solid solution were studied. The phosphors used were 41% ZnS: 59% CdS with a cobalt concentration from 0 to 0.325%. The analysis of the structure of films of different thicknesses using X-ray diffraction technique confirms that the calculated relative intensities of the planes show considerable differences from the experimental results. For film thicknesses 70 nm thea axis is normal to the substrate, while at greater thicknesses (273 nm) thec axis is practically normal to the substrate. The effect of the electron beam on the solid solution indicates that layers decomposed leaving the grain boundaries decorated by metallic cadmium and zinc particles.     

Influence of the tank shape on the electrostatic field generated by space charge

Contents The paper provides results of calculations of electric field for parallelepiped and ellipsoidal tanks. The calculations reported in the paper indicate that even at a relatively small volumetric density of charge (q=100 C/m³) the intensity of the electric field in the vapour/air mixture may exceed the critical value (3 MV/m), which may cause a spark discharge. They also show the maximum of the electric field intensity, the maximum potential and energy after the change in shape of the tank, while the volume of the stored liquid remains the same. The calculations of these quantities can be used as a basis for reduction or elimination of the electrostatic ignition hazard.

---

Einfluß der Behälterform auf das elektrostatische Feld infolge einer Raumladung

Übersicht Der Beitrag behandelt elektrische Felder in Behältern von der Form eines Parallelepipeds und eines Ellipsoids. Die Berechnungen zeigen, daß selbst bei relativ kleinen Werten der Raumladung (100 C/m³) die elektrische Feldstärke im Dampf-Luftgemisch den kritischen Wert (3 ÖMV/m) überschreiten und einen Durchschlag verursachen kann. Außerdem werden die Maxima der elektrischen Feldstärke, des Potentials und der Energie in Abhängigkeit der Behälterform angegeben unter der Voraussetzung, daß das Volumen der enthaltenen Flüssigkeit konstant bleibt. Die Rechenergebnisse lassen sich als Basis für die Verminderung oder Elimination der Gefahr von Überschlägen verwenden.

---

List of symbols A, B, C factors of the ellipsoidal tank - a, b, H length, width and height of the parallelepiped tank, respectively [m] - E electrical field strength [V/m] - h liquid height in the tank [m] - q volumetric charge density [C/m³] - R radius of the sphere [m] - V electric potential [V] - W _E electric field energy [J] - V volume of the tank - _r relative dielectric constant - _O absolute dielectric constant 8.854×10^–12 [As/Vm]     

Autocatalytic dissolution of Pb in HNO3

The reaction between Pb and HNO₃ has been investigated using the thermometric technique. Weight-loss measurements on the reaction were also obtained. As the HNO₃ concentration is increased from 5×10^–2 to 4mol l^–1, the corrosion rate increases. This is shown thermometrically by a substantial increase in the maximum temperature attained, T _m, as well as a decrease in the time, t, required for reaching T _m. Dissolution of Pb in HNO₃ is proposed to take place according to an autocatalytic mechanism. Passivation sets were detected in solutions 11 mol l^–1 HNO₃. A parallel indication between the thermometric technique and weight-loss measurements was obtained. The rate-determining step of the autocatalytic process involves HNO₂ in dissolution of Pb in HNO₃. This is supported by the results of addition of hydrazine to the solution. This additive raises the maximum measured temperature, without affecting the corresponding time necessary to reach it. The effect of addition of NaNO₂, NaNO₃, NaCl, Na₂SO₄, NaH₂PO₄ and NaClO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was examined. Only NaNO₂ accelerates the dissolution reaction while the other salts show as inhibition effect. It was found that these additives inhibit dissolution due to the displacement of some cathodic depolarizing components, as NO₂, from the active sites on the metal surface. The effect of addition of HCl, H₂SO₄, HClO₄ and H₃PO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was also investigated. The observed acceleration and retardation of the dissolution of Pb was found to be dependent on both the concentration and nature of anions of the extra acids added.     

基于CMOS工艺的无线图像传感器网络综述

无线传感器网络是无线通讯技术、网络技术、传感器技术交叉融合的新兴产物。无线传感器网络具备小型化、智能化、网络化和能够无线通讯等特点,能够满足人们在生产生活、科学研究、军事、医疗等众多领域对于实时信息获取的需求。由于人类获取信息的80%以上是通过视觉获取的,因此,无线图像传感器网络作为人类获取视觉图像信息的重要工具在无线传感器网络中占有重要的地位。无线图像传感器网络要想实现小型化、智能化、集成化等要求,采用与标准CMOS工艺兼容的CMOS图像传感器技术将是最为理想的选择。随着CMOS图像传感器工艺和设计水平的进步,CMOS图像传感器在成像质量、生产成本、小型化、智能化等方面显示出巨大的优势,同时由于与VLSI电路兼容的天然特性,基于CMOS图像传感器的无线图像传感器网络拥有巨大的发展潜力和广阔的市场前景。基于CMOS的无线图像传感器网络目前呈现多元化的发展趋势,高分辨率、高速、低功耗、智能化等方向是基于CMOS的无线图像传感器网络未来发展的方向。     

MICROSTRUCTURE AND REVERSE SHAPE MEMORY EFFECT IN A Cu-Zn-Al ALLOY

The bainite structure in a Cu-Zn-A1 alloy related to the reverse shape memory effect hasbeen observed by means of TEM.The reverse memory effect may be improved by up to oneorder of magnitude under applied constraint stress.The widespread propagation of bainite wasconfirmed to be the diffusion controlled shear process by the parabolic configuration of sideinterface of bainite plate and the twisting of intersected bainite plates.     

Synthesis and Evaluation of Voltage-Gated Sodium Channel Blocking Pyrroline Derivatives Endowed with Both Antiarrhythmic and Antioxidant Activities

Under the hypothesis that cardioprotective agents might benefit from synergism between antiarrhythmic activity and antioxidant properties, a small series of mexiletine analogues were coupled with the 2,2,5,5-tetramethylpyrroline moiety, known for its antioxidant effect, in order to obtain dual-acting drugs potentially useful in the protection of the heart against post-ischemic reperfusion injury. The pyrroline derivatives reported herein were found to be more potent as antiarrhythmic agents than mexiletine and displayed antioxidant activity. The most interesting tetramethylpyrroline congener, a tert-butyl-substituted analogue, was at least 100 times more active as an antiarrhythmic than mexiletine.     

Fabrication,Electrical and Photovoltaic Characterizations of SnSb2S4/n-Si Heterojunction

Silicon - An inexpensive spray pyrolysis technique was effectively used to form a p-type SnSb2S4 thin film on n-type Si wafer for the first time to produce SnSb2S4/n-Si heterojunction. The...     

Probing the Structural and Antimicrobial Study on a Sol–Gel Derived Velosef-Loaded Bioactive Calcium Magneso-Silicate Xerogel

Silicon - The nature of the opening silicate- based surface affects the chemical interaction, spectroscopic and antimicrobial efficiency. The aim of this approach was to evaluate the spectroscopic...     

Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.