Synthesis,structural characterization,and antiproliferative/cytotoxic effects of a novel modified poly(maleic anhydride-co-vinyl acetate)/doxorubicin conjugate

Polymer Bulletin - Drug carrier, poly(maleic anhydride-co-vinyl acetate) (MAVA or poly[MA-co-VA]) copolymer, was traditionally synthesized by free radical chain polymerization reaction, in methyl...     

Superporous cryogel/conductive composite systems for potential sensor applications

In situ synthesis of conductive polymers, poly(Aniline) (p(An)), poly(Pyrrole) (p(Py)), and poly(Thiophene) (p(Th)) within network of superporous cryogels with tunable functionalities as neutral poly(acrylamide) (p(AAm), anionic poly(acrylic acid) (p(AAc)), and cationic poly(4-vinylpyridine) (p(4-VP)) were carried out via oxidation polymerization technique. The highest conductivity values were measured for p(AAm)/p(An) semi-IPN cryogel with 1.4 × 10^?2 S.cm^?1 and for p(AAc)/p(Py) cryogel with 3.2 × 10^?4 S.cm^?1. In addition, to increase the amounts of conductive polymers within cryogel networks, reloading/polymerization cycle was carried out thrice, and found that there is no significant increase in the amounts of conductive polymers and the measured conductivity values. The prepared p(AAm), p(AAc), and p(4-VP) cryogels and their corresponding p(An), p(Py), and p(Th) composites were tested potential sensor materials against HCl and NH₃ vapor. The changes on conductivities for bare p(4-VP) cryogel were observed as 70 and 52-fold increase upon HCl and NH₃ gas treatment, respectively. The p(4-VP)/p(An) p(An) composites showed 7-fold conductivity decrease upon the treatments of HCl and NH₃ vapors. The p(AAm)/p(Py) composite responded 2-fold increase upon HCl vapor exposure and 50-fold decrease upon NH₃ vapor exposure. Furthermore, p(AAm)/p(Th) cryogel composite responded 7-fold decrease and 300-fold increase in their conductivities upon HCl and NH₃ vapor exposure, respectively.

Open image in new window

Graphical abstract ?

     

Evaluation of the bond strength of different bonding agents to porcelain and metal alloy

This study was carried out with the purpose of testing the bond strength of different bonding agents bonded to different substrates.Substrates consisted of cylindrical specimens of three different materials: porcelain, metal, and a porcelain–metal combination. Specimens were all 10 mm in diameter and 4 mm thick. Surfaces to be bonded were air-abraded with Al₂O₃ and cleaned ultrasonically in distilled water for 10 min. After the preparation of the surface was complete, three different bonding agents were applied to the central region of the substrates. Composite resin of a 3.5 mm diameter and 2 mm thick was applied. All specimens were thermocycled between 5 and 55 °C for 200 cycles with a 30-s dwell time. After thermocycling, specimens were stored at 37 °C in distilled water for an additional 7 days before being subjected to a shear load. Shear testing was conducted Hounsfield test machine.The univariate analysis of variance and the Duncan multiple comparison test were used for statistical assessment. It was found that both type of bonding agents and of substrate led to statistically significant differences in bond strength (p<0.01).It was found that the highest bond strength was produced by Clearfil and on pure alloy substrate (33.36 MPa) and the lowest bond strength in Single Bond and porcelain–alloy substrate (4.25 MPa).     

Experimental determination of effective moisture diffusivities of whole- and cut-rosehips in convective drying

Average effective moisture diffusivities for both the whole- and cut-rosehips were obtained during convective drying. The effects of process variables such as air temperature, air velocity and air absolute humidity on effective moisture diffusivity were studied. The average effective moisture diffusivity in rosehip ranged between 1.45 × 10^?10 and 10.3 × 10^?10 m²/s for whole-rosehip and between 1.44 × 10^?9 and 5.13 × 10^?9 m²/s for cut-rosehip at the temperatures studied. Activation energies for convective drying were found to be 62 kJ/mol for whole-rosehips and 58 kJ/mol for cut-rosehips.     

Antibacterial oil‐based polyurethane films for wound dressing applications

As an alternative to petroleum‐based polyol, hydroxyl containing material was prepared from linseed oil for polyurethane synthesis. Hexamethylene di‐isocyanate (HMDI) and/or 4, 4′‐methylene diphenyl di‐isocyanate (MDI) were used as isocyanate source. The polymerization reaction was carried out without catalyst. Polymer films were prepared by casting‐evaporation technique. The MDI/HMDI‐based polyurethane and its films had higher T_g and better thermal property than that of the HMDI‐based one because of the existence of benzene ring in the polymer chain. Static water contact angle was determined to be 74° and 77.5° for HMDI and MDI/HMDI‐based films, respectively. Water adsorption was found to be around 2.6–3.6% for both films. In vitro degradation of polyurethanes in phosphate buffered saline at 37°C was investigated by gravimetric method. Fourier transform infrared spectroscopy and scanning electron microscopy were used for confirmation of degradation on the polymer surface. The degradation rate of the HMDI‐based polyurethane film was found higher than that of the MDI/HMDI‐based film. Both the direct contact method and the MMT test were applied for determination of cytotoxicity of polymer films, and the polyurethane films investigated here was not cytotoxic. Silver‐containing films were prepared using Biocera A® as filler and were screened for their antibacterial performance against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and/or Bacillus subtilis. The films prepared with and without Biocera A® exhibited antibacterial activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Characterization of Properties in Friction Welded Stainless Steel and Copper Materials

The aim of this study is to investigate the metallurgical and mechanical properties of friction welded stainless steel-copper joints. One of the manufacturing methods used to produce parts made from different materials is the friction welding method. Application of classical welding techniques to such materials is difficult because of they have different thermal properties. Stainless steel-copper joints are inevitable for certain applications due to unique performances such as higher electric conductivity, heat conductivity, corrosion resistance, and mechanical properties. In the present study, austenitic stainless steel and copper parts were joined by friction welding. Tensile, fatigue, and notch-impact tests were applied to friction welded specimens, and the results were compared with those for the original materials. Microstructure, energy dispersive x-ray, and x-ray diffraction (XRD) analysis and hardness variations were conducted on the joints. Results showed that various intermetallic phases such as FeCu₄ and Cu₂NiZn occurred at the interface. It was found from the microstructure and XRD analysis that intermetallic phases formed in the interface which further caused a decrease in the strength of the joints. However, hardness of the copper increased slightly, whereas the hardness of steel decreases slightly on the horizontal distance from the center.     

Entropy generation in the flow system generated in between two parallel plates due to bivertical motion of the top plate

Thermodynamic irreversibility in the flow system provides information on the energy and power losses in the system. Minimization of entropy generation in the flow system enables for the parametric optimization of the system operation. In the present study, parallel plates, in between, filled with the fluid are considered. The fluid motion resulted from the bi-vertical compression of the top plate of the parallel plates is examined. The entropy generation rate in the flow system is formulated after considering the constant movement of the top plate, constant applied load, and the combination of the constant velocity and applied load to the top plate. The optimum operating conditions related to the fluid motion in between the parallel plates is determined through the entropy analysis. It is found that the combination of the constant velocity and the constant applied load resulted in the low entropy generation rate.     

New classification techniques for electroencephalogram (EEG) signals and a real-time EEG control of a robot

This paper studies the state-of-the-art classification techniques for electroencephalogram (EEG) signals. Fuzzy Functions Support Vector Classifier, Improved Fuzzy Functions Support Vector Classifier and a novel technique that has been designed by utilizing Particle Swarm Optimization and Radial Basis Function Networks (PSO-RBFN) have been studied. The classification performances of the techniques are compared on standard EEG datasets that are publicly available and used by brain–computer interface (BCI) researchers. In addition to the standard EEG datasets, the proposed classifier is also tested on non-EEG datasets for thorough comparison. Within the scope of this study, several data clustering algorithms such as Fuzzy C-means, K-means and PSO clustering algorithms are studied and their clustering performances on the same datasets are compared. The results show that PSO-RBFN might reach the classification performance of state-of-the art classifiers and might be a better alternative technique in the classification of EEG signals for real-time application. This has been demonstrated by implementing the proposed classifier in a real-time BCI application for a mobile robot control.