Laminar flame theory. Part II

The laminar flame theory under the condition of minimum entropy production is presented. The equation of the temperature boundary layer is obtained for Le=0, and its general solution is found. It is shown that the mechanism of laminar flame propagation can be treated from the viewpoint of stationary thermal explosion in a cylindrical vessel of radius 2 as the critical regime in which the burnup is taken into account in an unusual form. Tomsk. Translated from Fizika Goreniya i Vzryva, Vol. 29, No. 5, pp. 22–30, September–October, 1993     

Evaluation of the quality of compacting water-saturated sands by sounding

Various methods of sounding were investigated for evaluating the quality of compacting water-saturated fine and medium sands. A comparative analysis of the data obtained with the data of direct soil sampling was carried out. The given recommendations can be used when preparing the new edition of the building codes for engineering surveys for construction. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 17–20, July–August, 1994     

Management of E. coli dependent factorial diseases in weaning piglets

The most important postweaning factorial diseases are at least partly caused by E. coli. The term postweaning coli complex can be subcategorized into the following manifestations: postweaning diarrhoea, edema disease, postweaning wasting and hemorrhagic gastroenteritis. In the presented study the effect of prophylactic zootechnique alone and zoo- and biotechnique in combination was evaluated during the first weeks postweaning. The results showed that combined zoo- and biotechnique is superior to simple zootechnique regarding food conversion (1.41 kg versus 1.73 kg), average daily weight gain (390 g versus 325 g) and postweaning piglet mortality (3.1% versus 4.9%). It is the opinion of the authors that combined postweaning zoo- and biotechnique should be performed in such pig production units where ETEC and/or SLTEC are present.     

Data management and analysis for high-throughput DNA sequencingprojects

The rapid advances in molecular biology have begun to shift many of the bottlenecks in genome research from the laboratory to the data analysis facility. The pace at which this has occurred creates a situation in which software development always has to catch up with the flow of data. Since such large-scale processes were not anticipated, the analysis infrastructure has not been fully established. Furthermore, most systems that have been built were designed by the biologists who collected the data. More recently, computer scientists, mathematicians, and engineers have taken an interest in this problem. This has had a positive effect, since it has created a tight synergy between the informatics and the biology. Several principles affected the design of the system developed at TIGR. Each of the sample preparation, sequencing, and analysis steps had to be managed, scheduled, and tracked. This information had to be made readily available to those who needed it for carrying out their tasks. Different skill levels of the users had to be taken into account. The degree of human intervention at each step had to be evaluated and built into the design. A mixed processing environment of Macintosh and Unix platforms had to be integrated. Most importantly, the system had to save time, reduce error, and ensure uniformity of the analysis and quality of the results. In the authors' experience, the tools they have built work well because of their early decisions as to which systems to use for development. The authors settled on a robust relational database management system (Sybase) and a portable development environment (C, C++)     

High speed p-type SiGe modulation-doped field-effect transistors

We report on the fabrication and characterization of high-speed p-type modulation-doped field-effect transistors (MODFETs) with 0.7-μm and 1-μm gate-lengths having unity current-gain cut-off frequencies (f_T) of 9.5 GHz and 5.3 GHz, respectively. The devices were fabricated on a high hole mobility SiGe heterostructure grown by ultra-high-vacuum chemical vapor deposition (UHV-CVD). The dc maximum extrinsic transconductance (g_m) is 105 mS/mm (205 mS/mm) at room temperature (77 K) for the 0.7-μm gate length devices. The fabricated devices show good pinch-off characteristics and have a very low gate leakage current of a few μA/mm at room temperature and a few nA/mm at 77 K     

Construction of the plasmid PMEX8-HAK1 and random site-directed mutagenesis of human cytosolic adenylate kinase

The pMEX8-hAK1 vector was devised from the pAK plasmid (Kim J. H. et al., 1989, Protein Engineering 5, 379-386), which could directly express human adenylate kinase proteins without recombination and its single strand DNA could be withdrawn with helper phage for random site-directed mutagenesis. The conserved key residues at Lys21, Lys27, and Thr39 were engineered to obtain mutants for kinetic analysis. Three mutants were obtained as K21P, K27R, and T39S, their specific activities were strikingly reduced compared to those of wild type adenylate kinase. This pMEX8-hAK1 will be a powerful tool for site-directed mutagenesis to detect the substrate-enzyme interaction for human adenylate kinase including various other enzymes.     

Calculation of the acoustical characteristics of gas transport equipment of the unit type in the design stage

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 11, pp. 28–30, November, 1993.     

Real-time X-ray diffraction study at different scan rates of phase transitions for dipalmitoylphosphatidylcholine in KSCN

A questionnaire survey was carried out to examine the attitudes and practices of Australian and New Zealand intensivists with regard to brain death and organ donation. A return rate of 82.5% was achieved. Fifty-eight per cent had written evidence of their own wishes to donate organs and 94% would agree to donation from a dependent. At least one intensivist is involved in certifying brain death on 95% of occasions. Intensivists are involved in the request for organ donation over 90% of the time although one-third do not believe that it is their role to request organ donation. Although two-thirds believe that the family should always be approached for organ donation, another 52 out of 254 indicated that it was their (the intensivist's) role to decide if families should be asked for organ donation. Possible reasons for not requesting are language or other communication problems, perceptions of cultural differences and degrees of family distress. Twenty per cent of respondents do not provide haemodynamic support before brain death confirmation. Australian and New Zealand intensivists overwhelmingly support the concept of brain death, current methods of confirmation of brain death, organ donation and transplantation. Possible reasons behind loss of potential donors include decisions not to resuscitate both before and after brain death is confirmed. Perceptions of family grief and cultural differences clearly inhibit requests for organ donation. A very few units have an effective policy on approaching families about organ donation. Intensivists have almost exclusive control over requests for organ donation and thus bear a full professional responsibility for this element of hospital practice.     

Image coding by multistep, adaptive flux interpolation

The authors describe and discuss the new technique, multistep adaptive flux interpolation (MAFI), and its application to image data for coding. When applied to an image, MAFI produces an output which is also in an image form, but which has a more uniform feature density and a greatly reduced size. MAFI warps the input image by removing those rows and columns which contain a majority of redundant pixels. The side information required for reconstruction is minimal, and the image can be further compressed using conventional coders, making the compression ratio even higher. Because of its warped nature, the MAFI output's statistics are also more consistent with the properties assumed by block-based discrete cosine transform (DCT) methods     

Manufacture of films displaying liquid-crystalline structure

Reported is an attempt to attain orientation of macromolecules during extrusion of films of cellulose derivatives that led to the liquid-crystalline state of a polymer and resulted in enhanced film strength.