SDN‐based dynamic multipath forwarding for inter–data center networking

Equal‐cost multipath (ECMP)–based traffic engineering (TE) methods are commonly used in intra–data center (DC) networks to improve the transmission performance for east‐west traffic (ie, traffic from server to server within a DC). However, applying ECMP on inter‐DC wide area network (WAN) offers limited performance enhancement as a result of irregular network topology. Since TE can be intelligently and efficiently realized with software‐defined networking (SDN), SDN‐based multipath becomes a popular option. However, SDN suffers from scalability issue caused by limited ternary content‐addressable memory (TCAM) size. In this paper, we propose an SDN‐based TE method called dynamic flow‐entry‐saving multipath (DFSM) for inter‐DC traffic forwarding. DFSM adopts source‐destination–based multipath forwarding and latency‐aware traffic splitting to reduce the consumption of flow entries and achieve load balancing. The evaluation results indicate that DFSM saves 15% to 30% of system flow entries in practical topologies and reduces the standard deviation of path latencies from 10% to 7% than do label‐switched tunneling, and also reduces average latency by 10% to 48% by consuming 6% to 20% more flow entries than do ECMP in less‐interconnected topologies. Note that the performance gain may not always be proportional to flow entry investment, with the interconnectivity between nodes being an important factor. The evaluation also indicates that per‐flow provision consumes several times the flow entries consumed by DFSM but reduces latency by 10% at most. Besides, DFSM reduces the standard deviation of path latencies from 14% to 7% than do even traffic splitting.     

End‐to‐end security‐reliability analysis of multi‐hop cognitive relaying protocol with TAS/SC‐based primary communication,total interference constraint and asymmetric fading channels

In this paper, we analyze the tradeoff between outage probability (OP) and intercept probability (IP) for a multi‐hop relaying scheme in cognitive radio (CR) networks. In the proposed protocol, a multi‐antenna primary transmitter (PT) communicates with a multi‐antenna primary receiver (PR), using transmit antenna selection (TAS) / selection combining (SC) technique, while a secondary source attempts to transmit its data to a secondary destination via a multi‐hop approach in presence of a secondary eavesdropper. The secondary transmitters such as source and relays have to adjust their transmit power to satisfy total interference constraint given by PR. We consider an asymmetric fading channel model, where the secondary channels are Rician fading, while the remaining ones experience the Rayleigh fading. Moreover, an optimal interference allocation method is proposed to minimize OP of the primary network. For the secondary network, we derive exact expressions of end‐to‐end OP and IP which are verified by Monte Carlo simulations.     

On the capacity of the state‐dependent interference relay channel

This paper considers the state‐dependent interference relay channel (SIRC) in which one of the two users may operate as a secondary user and the relay has a noncausal access to the signals from both users. For discrete memoryless SIRC, we first establish the achievable rate region by carefully merging Han‐Kobayashi rate splitting encoding technique, superposition encoding, and Gelfand‐Pinsker encoding technique. Then, based on the achievable rate region that we derive, the capacity of the SIRC is established in many different scenarios including (a) the weak interference regime, (b) the strong interference regime, and (c) the very strong interference regime. This means that our capacity results contain all available known results in the literature. Next, the achievable rate region and the associated capacity results are also evaluated in the case of additive Gaussian noise. Additionally, many numerical examples are investigated to show the value of our theoretical derivations.     

A low complexity mechanism for congestion notification in rural IPSec‐enabled heterogeneous backhaul networks

Management in wireless backhaul networks is a challenging task, especially in rural and isolated environments. In these scenarios, the backhaul network usually consists of a set of heterogeneous wireless links that provide limited and variable bandwidth to the access networks, often 3G/4G small cells. Because of the highly constrained nature of this type of backhaul network, intelligent and joint management in both the backhaul network and the access network is crucial in order to avoid performance degradation caused by traffic congestion. In order to avoid the saturation in the backhaul network, access networks should consider the backhaul state when taking decisions in the admission control and scheduling procedures. However, no standardized mechanisms currently exist for sharing management information between both networks. In this work, we propose to use the Explicit Congestion Notification (ECN) bit in the outer IP headers present in the Iuh 3GPP IPSec‐enabled interfaces in order to notify the backhaul congestion state to the access network. We analyze for the referred scenario, compatibility and security details, validating our approach by running numerically simulations and implementing the notification mechanism. Our low complexity approach offers 2% accuracy and backhaul update latency lower than 10 ms during 80% of the time, which makes the solution appropriate for admission control and scheduling intervals in small cells.     

λ/64‐spaced compact ESPAR antenna via analog RF switches for a single RF chain MIMO system

In this study, an electronically steerable parasitic array radiator (ESPAR) antenna via analog radio frequency (RF) switches for a single RF chain MIMO system is presented. The proposed antenna elements are spaced at λ/64, and the antenna size is miniaturized via a dielectric radome. The optimum reactance load value is calculated via the beamforming load search algorithm. A switch simplifies the design and implementation of the reactance loads and does not require additional complex antenna matching circuits. The measured impedance bandwidth of the proposed ESPAR antenna is 1,500 MHz (1.75 GHz–3.25 GHz). The proposed antenna exhibits a beam pattern that is reconfigurable at 2.48 GHz due to changes in the reactance value, and the measured peak antenna gain is 4.8 dBi. The reception performance is measured by using a 4  4 BPSK signal. The measured average SNR is 17 dB when using the proposed ESPAR antenna as a transmitter, and the average SNR is 16.7 dB when using a four‐conventional monopole antenna.     

JPEG Pleno: Providing representation interoperability for holographic applications and devices

Guaranteeing interoperability between devices and applications is the core role of standards organizations. Since its first JPEG standard in 1992, the Joint Photographic Experts Group (JPEG) has published several image coding standards that have been successful in a plethora of imaging markets. Recently, these markets have become subject to potentially disruptive innovations owing to the rise of new imaging modalities such as light fields, point clouds, and holography. These so‐called plenoptic modalities hold the promise of facilitating a more efficient and complete representation of 3D scenes when compared to classic 2D modalities. However, due to the heterogeneity of plenoptic products that will hit the market, serious interoperability concerns have arisen. In this paper, we particularly focus on the holographic modality and outline how the JPEG committee has addressed these tremendous challenges. We discuss the main use cases and provide a preliminary list of requirements. In addition, based on the discussion of real‐valued and complex data representations, we elaborate on potential coding technologies that range from approaches utilizing classical 2D coding technologies to holographic content‐aware coding solutions. Finally, we address the problem of visual quality assessment of holographic data covering both visual quality metrics and subjective assessment methodologies.     

A novel phase noise reduction technique in oscillators usingdefected ground structure

A new technique to reduce the phase noise in microwave oscillators is developed using the resonant characteristic of the defected ground structure (DGS). Two kinds of oscillators have been designed and measured for the examination of the reduction of phase noise by the DGS. The first adopts the DGS section under the microstrip line at the gate circuit, while the second has only the conventional microstrip line. Measurement shows reduced phase noise by 10-15 dB in the oscillator with the DGS compared to the conventional one     

Simulations and experiments for optimal deployment of an RFID‐based location‐aware system

The proliferation of communication and mobile computing devices and local‐area wireless networks has cultivated a growing interest in location‐aware systems and services. An essential problem in location‐aware computing is the determination of physical locations. RFID technologies are gaining much attention, as they are attractive solutions to indoor localization in many healthcare applications. In this paper, we propose a new indoor localization methodology that aims to deploying RFID technologies in achieving accurate location‐aware undertakings with real‐time computation. The proposed algorithm introduces means to improve the accuracy of the received RF signals. Optimal settings for the parameters in terms of reader and reference tag properties were investigated through simulations and experiments. The experimental results indicate that our indoor localization methodology is promising in applications that require fast installation, low cost and high accuracy. Copyright © 2009 John Wiley & Sons, Ltd.     

A Light‐Blue Phosphorescent Dendrimer for Efficient Solution‐Processed Light‐Emitting Diodes

We describe the preparation of a dendrimer that is solution‐processible and contains 2‐ethylhexyloxy surface groups, biphenyl‐based dendrons, and a fac‐tris[2‐(2,4‐difluorophenyl)pyridyl]iridium(III ) core. The homoleptic complex is highly luminescent and the color of emission is similar to the heteroleptic iridium(III ) complex, bis[2‐(2,4‐difluorophenyl)pyridyl]picolinate iridium(III ) (FIrpic). To avoid the change in emission color that would arise from attaching a conjugated dendron to the ligand, the conjugation between the dendron and the ligand is decoupled by separating them with an ethane linkage. Bilayer devices containing a light‐emitting layer comprised of a 30 wt.‐% blend of the dendrimer in 1,3‐bis(N‐carbazolyl)benzene (mCP) and a 1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene electron‐transport layer have external quantum and power efficiencies, respectively, of 10.4 % and 11 lm W^–1 at 100 cd m^–2 and 6.4 V. These efficiencies are higher than those reported for more complex device structures prepared via evaporation that contain FIrpic blended with mCP as the emitting layer, showing the advantage of using a dendritic structure to control processing and intermolecular interactions. The external quantum efficiency of 10.4 % corresponds to the maximum achievable efficiency based on the photoluminescence quantum yield of the emissive film and the standard out‐coupling of light from the device.     

2,7‐Carbazolenevinylene‐Based Oligomer Thin‐Film Transistors: High Mobility Through Structural Ordering

We have fabricated organic field‐effect transistors based on thin films of 2,7‐carbazole oligomeric semiconductors 1,4‐bis(vinylene‐(N‐hexyl‐2‐carbazole))phenylene (CPC), 1,4‐bis(vinylene‐(N′‐methyl‐7′‐hexyl‐2′‐carbazole))benzene (RCPCR), N‐hexyl‐2,7‐bis(vinylene‐(N‐hexyl‐2‐carbazole))carbazole (CCC), and N‐methyl‐2,7‐bis(vinylene‐(7‐hexyl‐N‐methyl‐2‐carbazole))carbazole (RCCCR). The organic semiconductors are deposited by thermal evaporation on bare and chemically modified silicon dioxide surfaces (SiO₂/Si) held at different temperatures varying from 25 to 200 °C during deposition. The resulting thin films have been characterized using UV‐vis and Fourier‐transform infrared spectroscopies, scanning electron microscopy, and X‐ray diffraction, and the observed top‐contact transistor performances have been correlated with thin‐film properties. We found that these new π‐conjugated oligomers can form highly ordered structures and reach high hole mobilities. Devices using CPC as the active semiconductor have exhibited mobilities as high as 0.3 cm² V^–1 s^–1 with on/off current ratios of up to 10⁷. These features make CPC and 2,7‐carbazolenevinylene‐based oligomers attractive candidates for device applications.