Recent Advances in Rolling 2D TMDs Nanosheets into 1D TMDs Nanotubes/Nanoscrolls

Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS₂ or MoS₂ NTs without a junction may exceed the Shockley–Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS₂ or MoS₂ NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe₂/MoS₂ NSs junction is superior to that of the performance of MoS₂ NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.     

Preparation of nanometre size oxide particles using filter expansion aerosol generator

Crystalline zinc oxide particles of nanometre size (< 20 nm) particles were produced from a zinc acetate solution by using a filter expansion aerosol generator (FEAG). The FEAG is an aerosol generator that is operated at 60 torr reactor pressure and produces droplets of around 2 m. The shape of the particles produced by the FEAG were distinctively different from those produced by the ultrasonic spray source (USS). Results from scanning electron microscopy (SEM) and X-ray diffractometry (XRD) indicated that crystalline zinc oxide particles of nanometre size were produced at 600 °C in 0.02 s residence time. Weight loss of these particles, determined by thermogravimetric analysis (TGA), was 3 wt%. Based on the morphology change as a function of the reactor temperature and solute concentration, we proposed that the nanometre particles were formed by uniform precipitation at the drying stage and decomposition followed by disintegration into nanometre particles. It was also shown that exothermic decomposition of the solute was not required for the disintegration of the primary particles in the FEAG process. This result opened up an opportunity for producing carbon-free nanometre particles from nitrate salts by using the FEAG.     

Transformation of a thin-walled solid model into a surface model via solid deflation

A simplified geometric model with lower dimensionality, such as a mid-surface model, is often preferred over a detailed solid model for the analysis process, if the analysis results are not seriously impacted. In order to derive a mid-surface model from a thin-walled solid model, in this paper, we propose a novel approach called the solid deflation method. In this method, a solid model is assumed to be created by using air to inflate a shell that comprises the surface of the solid model. First, the model is simplified by the removal of any detailed features whose absence would not alter its overall shape. Next, the solid model itself can be converted into a degenerate solid model with zero thickness. Finally, a surface model is generated by splitting large faces paired in the thinned solid model, selecting one face per pair for creating a sheet model, and sewing the selected faces. Using this method, a more practical and usable mid-surface model can be very efficiently generated from a solid model because it can circumvent not only the tedious trimming and extension processes of the medial axis transformation method but also the time-consuming patch joining process of the mid-surface abstraction approach.     

Betweenness parameterized above tight lower bound

We study ordinal embedding relaxations in the realm of parameterized complexity. We prove the existence of a quadratic kernel for the Betweenness problem parameterized above its tight lower bound, which is stated as follows. For a set V of variables and set C of constraints “vi is between vj and vk”, decide whether there is a bijection from V to the set {1,…,|V|} satisfying at least |C|/3+κ of the constraints in C. Our result solves an open problem attributed to Benny Chor in Niedermeier's monograph “Invitation to Fixed-Parameter Algorithms”. The betweenness problem is of interest in molecular biology. An approach developed in this paper can be used to determine parameterized complexity of a number of other optimization problems on permutations parameterized above or below tight bounds.     

Review Paper: A critical review of the present and future prospects for electronic paper

Abstract— The commercial success of monochrome electronic paper (e‐Paper) is now propelling the development of next‐generation flexible, video, and color e‐Paper products. Unlike the early battles in the 1980s and 1990s between transmissive and emissive display technologies, there is a extraordinary diversity of technologies vying to become the next generation of e‐Paper. A critical review of all major e‐Paper technologies, including a technical breakdown of the performance limitations based on device physics and commentary on possible future breakthroughs, is presented. In addition, the visual requirements for color e‐Paper are provided and compared to standards used in conventional print. It is concluded that researchers have much work remaining in order to bridge the significant gap between reflective electronic displays and print‐on‐paper.     

Localization algorithm using a virtual label for a mobile robot in indoor and outdoor environments

Scanning laser range sensors provide range data consisting of a set of point measurements. The laser sensor URG-04LX has a distance range of approximately 0.02–4 m and a scanning angle range of 240°. Usually, such an image range is acquired from one viewpoint by “moving” the laser beam using rotating mirrors/prisms. The orientation of the laser beam can easily be measured and converted into the coordinates of the image. This article conducts localization using virtual labels with data about distances in the environment obtained from 2D distance laser sensors. This method puts virtual labels on special features and points which are along the mobile robot’s path. The current location is calculated by combining the virtual label and the range image of the laser range finder.     

Dissipative particle dynamics simulations for fibre suspensions in newtonian and viscoelastic fluids

A versatile model of fibre suspensions in Newtonian and viscoelastic fluids has been developed using dissipative particle dynamics method. The viscoelastic fluid is modelled by linear chains with linear connector spring force (the Oldroyd-B model), which is known to be a reasonable model for the so-called Boger fluid (a dilute suspension of polymer in a highly viscous solvent). The numerical results are in excellent agreement with the analytical results of the Oldroyd-B model in simple shear flow. An effective meso-scale model of fibre in DPD is proposed and then incorporated with simple Newtonian fluid and our Boger fluid to enable entirely study rheological properties of fibre suspensions in both Newtonian and viscoelastic solvents. The numerical results are well compared with available experimental data and other numerical models.