UNSTRUCTURED FINITE-VOLUME METHOD FOR RADIATIVE HEAT TRANSFER IN A COMPLEX TWO-DIMENSIONAL GEOMETRY WITH OBSTACLES

The radiative heat transfer in a complex two-dimensional enclosure with obstacles with participating medium is very important in practical engineering applications. In order to deal with this problem, in this study the finite-volume method (FVM) for radiation has been derived using the unstructured grid system. A general discretization equation was formulated by introducing the directional weight and the step scheme for spatial differencing. For its comparison and validation, two test cases, an equilateral triangular enclosure and a square enclosure with baffle, were chosen. Then, more complex and practical cases, such as a semicircular enclosure with cylinder hole, a square enclosure with finned internal cylinder, and a furnace with embedded cooling pipes, were investigated. All the results obtained by the unstructured FVM agreed very well with the exact solutions as well as the results obtained by the zone method. Furthermore, the wiggling behavior occurring in the blocked-off FVM was not produced by the unstructured FVM. Three types of manipulation of control angle overlap were also examined here. It was found that the solutions depended on the type of manipulation of control angle overlap, especially when the number of control angles was small. Usually, both the pixelation method and exact treatment introduced here yielded better solutions than the bold approximation.     

Size control of Pb-based glass powders between 38 and 84 nm in the flame spray pyrolysis

Nano-sized Pb-based glass powders with different mean size, ranging from 38 to 84 nm were prepared by flame spray pyrolysis. The mean sizes of the glass powders were controlled by changing the concentration of spray solution. The glass powders prepared by flame spray pyrolysis from the spray solutions with different concentration had broad peaks at around 28° in the XRD patterns. The dielectric layers formed from the glass powders with the mean size of 38 nm had dense inner structures at firing temperatures of 480 and 520°C. On the other hand, the dielectric layer formed from the glass powders with the mean size of 84 nm had some voids inside the layer. The transmittances of the dielectric layer formed from the glass powders with the mean sizes of 38 and 84 nm were each 91% and 74% at firing temperature of 480°C.     

Anti-adhesive effect of poloxamer-based thermo-sensitive sol-gel in rabbit laminectomy model

Poloxamer-based thermo-sensitive sol-gel has been developed to reduce the incidence of postoperative scar formation at the laminectomy site. The purpose of this study was to evaluate the anti-adhesive effect of poloxamer based thermo-sensitive sol-gel compared to hyaluronate based solution after laminectomy, using a rabbit model. A thermo-sensitive anti-adhesive with a property of sol-gel transition was manufactured by a physical mixture of Poloxamer188/407, Chitosan and Gelatin. The viscosity in different temperatures was assessed. 72 adult New Zealand rabbits underwent lumbar laminectomy and were randomly divided into experimental (treated with the newly developed agent), positive (treated with hyaluronate based solution), and negative control groups. Each group was subdivided into 1 and 4-week subgroups. Gross and histological evaluations were performed to assess the extent of epidural adhesion. The experimental group showed significantly higher viscosity compared to the positive control group and showed a significant increase of viscosity as the temperature increased. Gross evaluation showed no statistically significant differences between the 1- and 4-week subgroups. However, histologic evaluation showed significant differences both in 1- and 4-week subgroups. Although the 4-week histologic results of the experimental and the positive control subgroups showed no significant difference, both subgroups revealed higher value compared to the negative control subgroup with regard to the ratio of adhesion less than 50?%. The new poloxamer based thermo-sensitive agent showed superior efficacy over the hyaluronate based agent at 1?week postoperatively. At 4?weeks postoperatively, there were no statistically significant differences between the two agents, although both showed efficacy over the sham group.     

Numerical analysis of convective flow and thermal stratification in a cryogenic storage tank

In this study, the liquid–vapor mixture model was used for a numerical study of natural convective flow in a cryogenic tank with a capacity of 4.9?m³ under various conditions of heat flux and filling level to understand the early stages of convective flow phenomena and the consequent thermal stratification of cryogenic liquid. Two cryogens—liquefied natural gas (LNG) and liquefied nitrogen (LN₂)—were compared to observe their effects. LN₂ exhibited faster vaporization owing to its lower heat of vaporization. It was observed that higher heat flux and lower filling level led to faster vaporization and relatively vigorous heat transfer, showing early thermal stratification.     

Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements

This paper describes the results of laboratory and full-scale performance tests for a high durability asphalt binder (HDAB) and high durability asphalt mixture (HDAM) applicable to the wearing course in a bridge deck system. The HDAB was developed using a styrene–butadiene–styrene (SBS) modifier and hydrocarbon for improving construction workability and resistance to fatigue cracking. Various binder tests were conducted on the HDAB, and test results showed that the resistance to fatigue and low temperature cracking of the HDAB increased significantly compared to that of the PG 64-22 and PG 76-22 binders. For the mixtures, the fatigue test results showed that the HDAM has a three times longer fatigue life than the SBS-modified asphalt mixture. It was also found that the HDAM has a higher resistance against moisture-induced damage. Results from full-scale accelerated testing on the bridge deck pavement system proved that the HDAM can significantly improve pavement performance.     

Development of censored data-based robust design for pharmaceutical quality by design

Robust design techniques, which are based on the concept of building quality into products or processes, are increasingly popular in many manufacturing industries. In this paper, we propose a new robust design model in the context of pharmaceutical production research and development. Traditional robust design principles have often been applied to situations in which the quality characteristics of interest are typically time insensitive. In pharmaceutical manufacturing processes, time-oriented quality characteristics, such as the degradation of a drug, are often of interest. As a result, current robust design models for quality improvement which have been studied in the literature may not be effective in finding robust design solutions. To address such practical needs, this paper develops a robust design model using censored data, which is perhaps the first attempt in the robust design field. We then study estimation methods, such as the expectation–maximization algorithm and the maximum likelihood method, in the robust design context. Finally, comparative studies are discussed for model verification via a numerical example.     

Antiobese and hypocholesterolaemic effects of an Adenophora triphylla extract in HepG2 cells and high fat diet-induced obese mice

The ethyl acetate extract from Adenophora triphylla root (ATea) had strong antioxidant effect. We hypothesised that a high fat (HF) diet might induce oxidative stress and so, dietary antioxidant may have beneficial effects on hypercholesterolaemia, but the underlying mechanisms involved are not fully understood. To test this hypothesis, C57BL/6 mice were fed with HF diet for 9 weeks. In the last 4 weeks, the HF diet was supplemented with 0, 25 or 75 mg/kg ATea. ATea decreased body weight gain and both ATea doses significantly reduced the plasma and hepatic cholesterol levels of the obese mice. Analysis of the hepatic expression of proteins known to play important roles in cholesterol metabolism indicated that ATea significantly enhanced low density lipoprotein receptor (LDL receptor) and cholesterol 7α-hydroxylase (CYP7A1) expression but inhibited the 3-hydroxy-3-methylglutaryl–CoA reductase (HMG–CoA reductase) expression in HepG2 cells and mice. No mutagenic activity was observed at high doses of ATea.     

Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.     

Highly conducting electrospun polyaniline-polyethylene oxide nanofibrous membranes filled with single-walled carbon nanotubes

Highly conducting nanofibrous composite of well-oriented single-walled carbon nanotubes (SWNTs) in polyaniline (PANI) and polyethylene oxide (PEO) have been fabricated using electrospinning. The room temperature electrical conductivity show nearly four order enhancement with highest (11.9 wt%) loading of SWNT in the PANI–PEO blend. The temperature dependent conductivities are measured in the range of 30–300 K and the results are analyzed by the fluctuation assisted tunneling model.