熔渣的化学统计热力学模型的应用

本文介绍了基于化学统计热力学的熔渣模型，模型考虑到多元氧化物熔体由氧离子与其周围的阳离子组成的“晶胞”构成，并通过化学统计效力学的推导，利用少量的二元氧化物系热力学参数计算复杂的三元及多元氧化物系的热力学性质．利用此模型，计算了钢中生成的氧化物夹杂的成分，计算与实验结果一致．     

外墙外保温在工程中的应用

外墙外保温能有效切断外墙混凝土柱、梁等形成的冷热桥,露点在外墙外表面,有效防止外墙内表面冬季出现结露,防止墙面腐蚀或霉烂.     

掺纳米Al2O3的纳米ZrO2(4Y)固体电解质的电性能

以纳米ZrO2(4Y)粉和纳米Al2O3粉为原料, 单轴成型, 1 200, 1 300 ℃无压烧结. 对掺不同质量分数(0.0～5.0%)Al2O3的ZrO2(4Y)烧结体, 用XRD, SEM和TEM研究了相组成和微观结构. 在不同温度下(300～1 000 ℃)测试了交流阻抗谱, 发现掺很少量的纳米Al2O3可降低ZrO2(4Y)的晶粒电阻. 但随着Al2O3掺入量的增加, 晶界电阻增大, 晶粒电阻也有所回升. 晶粒和晶界电导活化能则随Al2O3掺入量的变化不大. 对1 200 ℃,2 h烧结样品, 在1 000 ℃时, 掺0.5% Al2O3的ZrO2(4Y)样品有最大电导率, 为3.8×10-2Ω-1·cm-1.     

Effect of solution properties on nanofibrous structure of electrospun poly(lactic‐co‐glycolic acid)

Electrospinning of poly(lactic‐co‐glycolic acid) (PLGA) in chloroform or 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was investigated, focusing on its solution parameters, to develop nonwoven biodegradable nanofibrous structures for tissue engineering. PLGA nanofibers were obtained by electrospinning of 15 wt % PLGA solution and the resulting average fiber diameters were varied with the range of 270–760 nm, depending on solution property. When small amounts of benzyl triethylammonium chloride (BTEAC) was added to the PLGA/chloroform solution, the average diameter was decreased from 760 to 450 nm and the fibers were densely amounted in a straight shape. In addition, the average fiber diameter (270 nm) of nanofibers electrospun from polar HFIP solvent was much smaller than that (760 nm) of nanofibers electrospun from nonpolar chloroform solvent. Therefore, it could be concluded that conductivity or dielectric constant of the PLGA solution was a major parameter affecting the morphology and diameter of the electrospun PLGA fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1214–1221, 2006     

A kinetic study on medium temperature desulfurization using a natural manganese ore

Natural manganese ores were selected as raw materials for the desulfurization sorbent because of economical efficiency and high reactivity on hydrogen sulfide. Initial reaction rates between H₂S and desulfurization sorbent of natural manganese ores were determined in a temperature range of 400-800°C using a thermobalance reactor. All reactions were first order with respect to H₂S and were expressed by the Arrhenius relation. When the sulfidation reaction was controlled by diffusion, the temperature dependence of the effective diffusivity was given by the Arrhenius equation. Activation energies and frequency factors were obtained from the product layer diffusion coefficient of various sorbents by plotting as an Arrhenius equation form. Several additives were mixed to improve the sulfidation capacity, and NiO was the best additive.     

Water Bloom Precursor Analysis Based on Two Direction S-Rough Set

In the field of water quality management, it is vital to determine the main precursory anomalies from the precursor of intricate water bloom in the context of a given area. In this paper, a water bloom precursor analysis method, based on two direction singular rough set, was proposed. This approach was produced on the basis of the different sections and pre-water bloom of water bloom precursor anomalies and characteristic of elements transferred in singular rough set. For testing the validity of two direction singular rough set application in water bloom precursor analysis, Xiangxi River, which is one of the typical tributaries of Three Gorges Reservoir in China, was selected as study area. The result showed that compared with other indexes, pH and dissolved oxygen (DO) are the most valuable indicators of water bloom in the precursory anomalies. Furthermore, regarding with water bloom precursory anomalies in Xiangxi River, most of the nutrient loading and biological community are the key indicators. Hence, this method can determine the main precursory anomaly for water bloom in the study area, which provides powerful knowledge support to water quality specialists for them to comprehensively analyze precursory anomaly so as to find out its relationship with occurrence law of water bloom.     

Characterization and physical properties of polymethylphenylsilsesquioxane (PMPSQ) and hydroxyl‐functionalized polystyrene (PS–OH) hybrids

Polymethylphenylsilsesquioxane (PMPSQ–OH) and trimethylsilyl end‐blocked PMPSQ (PMPSQ–EC) were prepared. The thermal decomposition behavior of these polymers was studied by thermogravimetric analysis (TGA) and FT‐Raman spectroscopy. Hydroxyl‐functionalized polystyrene (PS–OH) was also prepared by anionic living polymerization. Thin hybrid films of PMPSQ/PS–OH with various blend ratios were obtained by spin‐coating on freshly cleaned glass. The surface morphology of the hybrid films was investigated by atomic force microscopy (AFM). In 80/20 PMPSQ/PS–OH hybrid film, the PS–OH component produced a very uniformly dispersed phase. This hybrid film contained small domains of PS–OH whose size ranged from 60 to 80 nm. As the content of PS–OH was increased, the domain morphology coarsened and phase inversion took place around 50 wt %. In the phase‐inversed system, the PMPSQ‐rich phase was uniformly distributed in the PS–OH‐rich continuous phase. In addition, temperature‐dependent dielectric properties of PMPSQ/PS–OH hybrids were investigated. Relaxation of the hybrids was observed with an increasing content of the PS–OH component due to the amorphous glass transition behavior of PS–OH. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2801–2812, 2003     

氯乙烯悬浮聚合分散体系的中试研究

通过大量试验分析了HPMC-E50和HPMC-F50在氯乙烯悬浮聚合中对PVC树脂的影响,从而确定了复合分散体系的质量分数以及分散剂的配比。结果表明,PVA和HPMC-E50复合分散体系的分散能力优于PVA和HPMC-F50复合分散体系;在悬浮聚合中,PVA和HPMC-E50复合分散体系与VCM的比例以0.05%~0.06%为宜;在PVA和HPMC-E50复合分散体系中,HPMC-E50所占比例以40%~60%为宜。     

疏水缔合聚丙烯酰胺溶液性质研究

用粘度法和核孔膜过滤法研究了实验室自制相对分子质量约1000万的疏水缔合聚丙烯酰胺(HAP)溶液的缔合效应,用粘度计考察了电解质浓度、温度和剪切速率对HAP溶液表观粘度的影响,并与相同测试条件下相对分子质量为1770万的部分水解聚丙烯酰胺3530进行对比。结果表明:HAP溶液在70℃的高温和矿化度为5727的高盐条件下,在1000mg/kg附近存在一临界缔合浓度,在临界缔合浓度以上,HAP溶液粘度迅速增加;而3530不存在临界缔合浓度,粘度增加缓慢。浓度为1250mg/kg的HAP溶液通过核孔膜20mL的过滤时间是347.3min,而相同浓度下3530的过滤时间仅为2.1min。浓度为1000mg/kg的HAP溶液即使在矿化度为30000、70℃的高温、30r/min转速的条件下,粘度仍达到32.8mPa·s,而聚合物3530的粘度仅有4.11mPa·s;当剪切速率增加到140r/min、温度为70℃,用矿化度为5727的模拟采出水配制的HAP溶液的粘度为9.21mPa·s,而3530溶液的粘度仅5.18mPa·s。HAP具有良好的耐温抗盐抗剪切能力。     

疏水缔合类聚丙烯酰胺溶液性质研究

综述了疏水缔合类聚丙烯酰胺溶液性质的影响因素以及测定溶液微观形态的研究方法。