Qualitativ-quantitative Simulation, ein Instrument zur Analyse nichtlinearer Regelkreise

Qualitative-quantitative simulation is one of the most productive and promising research areas in Artificial Intelligence to emerge in recent years. This method provides an elegant way for an exhaustive analysis of uncertain dynamic systems. The application of the qualitative-quantitative simulation is shown in this paper. The important question about the stability of a quanlitatively described dynamical system is solved by a novel analytic method.     

Speed reduction on through roads in Nordrhein-Westfalen.

The paper describes a program of experiments for speed reduction on 28 through roads in Nordrhein-Westfalen. In the process, different measures of construction, design, and traffic control were examined to determine their usefulness to reduce speed and to improve road safety. The need for systematic evaluation of a catalogue of measures partly resulted in unsatisfactory design conceptions for the through roads. The evaluation of the effects of the program has been carried out by use of before-and-after-studies of large extent. The speed measurements show that a distinct speed reduction can be obtained only from selected physical improvements. Measures based on optical effects and traffic signs were found to have very little effect on vehicle speeds. Furthermore, in light of the relatively small number of accidents that occur on the selected facilities, it was not possible to establish the beneficial impact of each specific control measure with statistical certainty. However, the results of the experiment have had an influence on the current definition of new design standards for main urban streets in Germany.     

Dielectric barrier discharge treatments at atmospheric pressure for wood surface modification

In this research, the effect of dielectric barrier discharge on mechanically manufactured (sawn, planed or polished) wood surfaces is investigated. The experiments have shown that the best hydrophilia is obtained with a cold plasma discharge in air under atmospheric pressure. Other gases such as helium, nitrogen, and argon have been tested, too. Changes of the wood surface properties were determined by absorption of water and contact angle measurements. As a result of a 1 to 20 seconds long exposure to plasma, wood surfaces became hydrophilic. The absorption of water in wood can be changed up to 22 times higher after plasma treatment in air for 20 seconds duration. The fracture strength of glued wood has been increased by 68% after this plasma pretreatment. Using plasma treatment in methane or acetylene wood surfaces are changed to hydrophobic properties. After plasma treatment for 1 min. in a Ar:CH₄=80:20 gas mixture under atmospheric pressure, the absorption of water in wood is 32 times lower than without plasma treatment. As mentioned before, plasma treatment can produce hydrophobic and hydrophilic wood surfaces. But a good homogeneity of the gas discharge is necessary for the plasma treatment of wood. Zusammenfassung Im Rahmen dieser Arbeit werden die Auswirkungen der dielektrisch behinderten Entladung bei Atmosphärendruck auf mechanisch bearbeitete Holzoberflächen (gesägt, gehobelt oder geschliffen) untersucht. Die Experimente haben gezeigt, dass die höchste Hydrophilität bei einem in Luftatmosphäre gezündetem Plasma erreicht wird. Es werden auch andere Gase verwendet, wie z.B. Helium, Stickstoff und Argon. Zur Untersuchung der veränderten mechanischen und energetischen Eigenschaften der Holzoberflächen werden der Tropfen-Versuch und die Kontaktwinkelmessung verwendet. Durch eine 1 bis 20 Sekunden lange Plasmabehandlung können die Oberflächen hydrophil gestaltet werden. So kann die Eindringzeit von Wasser um Faktor 22 gesteigert werden durch eine 20 Sekunden lange Plasmabehandlung in Umgebungsluft. Die Bruchfestigkeit von Leimholz wird durch die gleiche Plasmavorbehandlung um 68% gesteigert. Werden als Plasmabehandlungsgas Methan oder Acetylen eingesetzt, so wird die Holzoberfläche hydrophob. Durch eine 60 Sekunden lange Plasmabehandlung in einem Ar:CH₄=80:20 Gasgemisch bei Atmosphärendruck wird die Eindringszeit von Wasser um den Faktor 32 gesenkt. Mit Hilfe der Plasmabehandlung können also sowohl hydrophobe als auch hydrophile Holzoberflächen erzeugt werden. Jedoch wird für die Plasmabehandlung von Holz eine sehr homogene Gasentladung benötigt.     

The occurrence of goitrogenic substances in milk. 1. Release of goitrin in the milk of cows fed on rapeseed extract cakes

A total of six cows, divided into 3 groups, were fed various amounts of rape cake containing 6 g of goitrin/kg over a period of 7 days. The cows were milked twice a day and the goitrin content of the heated milk samples were determined by a HPLC-method within 2 h. When rape cake was fed at 0.39, 1.9 and 3.9% resp. of the total feed this resulted in medium goitrin values of 37, 163 and 707 micrograms/l milk. These values correspond to a transfer of about 0.1% of the original progoitrin content in the feed. 12 h after the last rape feeding the amount of goitrin in the milk was below the detection limit of 7 ppb. The toxicological significance of these findings are dicussed.     

堤坝渗漏防治技术在社岗防护堤的应用

该文从设计、施工和运行管理等方面介绍了高喷板墙、减压井、充填灌浆以及开挖导渗等技术在飞来峡水利枢纽社岗防护堤中的应用情况,探讨了堤坝渗漏综合防治的技术措施和有关问题。     

Development of an empirical mathematical model for describing and optimizing the hygiene potential of a thermophilic anaerobic bioreactor treating faeces.

Poor sanitation and insufficient disposal of sewage and faeces are primarily responsible for water associated health problems in developing countries. Domestic sewage and faeces are prevalently discharged into surface waters which are used by the inhabitants as a source for drinking water. This paper presents a decentralized anaerobic process technique for handling of such domestic organic waste. Such an efficient and compact system for treating faeces and food waste may be of great benefit for developing countries. Besides a stable biogas production for energy generation, the reduction of bacterial pathogens is of particular importance. In our research we investigated the removal capacity of the reactor concerning pathogens, which has been operated under thermophilic conditions. Faecal coliforms and intestinal enterococci have been detected as indicator organisms for bacterial pathogens. By the multiple regression analysis technique an empirical mathematical model has been developed. The model shows a high correlation between removal efficiency and both, hydraulic retention time (HRT) and temperature. By this model an optimized HRT for defined bacterial pathogens effluent standards can be easily calculated. Thus, hygiene potential can be evaluated along with economic aspects. In this paper not only results for describing the hygiene potential of a thermophilic anaerobic bioreactor are presented, but also an exemplary method to draw the right conclusions out of biological tests with the aid of mathematical tools.     

The possibility of evolving a theory for predicting the service life of reinforced concrete structures

The development in recent years with increasing air pollution, increasing need of energy saving and last not least the growing number of damage in old structures leads to a raising demand to calculate the durability of structures, too. The paper has been prepared by request of the RILEM Technical Committee 45-LTO to show that, in principle, it is possible to evolve a theory for predicting the service life of r.c. structures and to sketch a way how that could be achieved. A lot of necessary basic data can be found scattered in the literature. To collect these data will be the first step to take.     

Aqua-Biomant: integrated biological and electrochemical oxidation for industrial wastewater treatment.

An innovative technology for industrial wastewater treatment has been developed. The main focus of the new system is a transformation of persistent organic compounds (biorecalcitrant COD) into a biodegradable fraction, followed by high efficient biological elimination using specialised bacteria's. To fulfill these targets the Aqua-Biomant process integrates two treatment steps: an aerated biological upflow filter and a electrochemical oxidation technique using boron doped-diamond electrodes. The advantages of the process are high efficient COD removal with reduced energy consumption combined with low total residence time.