Possible effects of site isolation in antimony oxide-modified vanadia/titania catalysts for selective oxidation of o-xylene

Titania-supported vanadia catalysts were modified by addition of antimony oxide for application in o-xylene selective oxidation to phthalic anhydride. It was shown that active and selective catalysts can be prepared by ball-milling mixtures of powders of TiO₂, V₂O₅and Sb₂O₃followed by calcination. X-ray photoelectron spectroscopy proves the formation of highly dispersed overlayers of vanadium oxide and antimony oxide, in which V⁵⁺is partially reduced to lower oxidation states and Sb³⁺is partially oxidized to Sb⁵⁺. Antimony oxide segregated into the outermost surface layers. It is therefore inferred that the presence of the antimony oxide modifier spatially separates V–O species and leads to site isolation which may be responsible for the positive effect of the modifier for the catalyst's selectivity.     

Polystyrene Containing Carbinolamine/Azomethine Potentially Useful as Antimicrobial Agent: Synthesis and Biological Evaluation

An investigation of antimicrobial properties of 12 novel modified polymer derived from the condensation reaction of (aminomethyl)polystyrene and four substitute salicylaldehyde (2-hydroxy benzaldehyde, 5-fluoro-2 hydroxy benzaldehyde, 5-fluoro-3-chloro-salicylaldehyde and 5-fluoro-3-methyl-salicylaldehyde) has been carried out and Cr(III) and Ni(II) complexes have been prepared. Modified polymers were characterized by magnetic susceptibility, elemental analyses, and spectral studies. The ¹H NMR and ¹³C NMR spectra analysis of the polymeric carbinolamine/azomethine were determined. In addition, surface morphology and composition were determined by SEM/EDX. Thermo gravimetric analyses of polymers were carried out in nitrogen atmosphere. Antibacterial activities of the polymers attached carbinolamine/azomethine and their complexes were studied by the well-diffusion method against Listeria monocytogenes 4b, Staphylococcus aureus, Escherichia coli, Salmonella typhi H, Brucella abortus, Staphylococcus epidermis sp., Micrococcus luteus, Shigella dysenteria type 10, Bacillus cereus, Pseudomonas putida and antifungal activity against Candida albicans.     

Comparison of melt extrusion and thermokinetic mixing methods in poly(ethylene terephthalate)/montmorillonite nanocomposites

The scope of this study consists in studying the effects of processing type on thermal stability of poly(ethylene terephthalate) (PET) and its nanocomposites prepared with organically modified clays. To achieve this goal, an intercalating agent was synthesized and montmorillonite type of clay modified with this intercalating agent was mixed with the PET by using melt extrusion and high‐shear thermokinetic mixing method. According to the results, manganese in the raw clay—though chemically bound—was found to be responsible for the decreased intrinsic viscosity (IV) values, i.e. decreased molecular weight in PET/organoclay nanocomposites. Besides, it was revealed that working on the thermokinetic mixer provided substantial contributions such as shorter processing times in comparison to the melt extrusion method, elimination of drying step before melt processing, which has been accepted as an inevitable process for PET so far, less thermal degradation because of short processing times, and more homogeneous and better dispersion of the clay particles in PET matrix phase. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Flow behavior of polypropylenes with different molecular structures in a coat‐hanger die

An experimental investigation of the flow behavior of three polypropylene melts with different molecular structures during extrusion through a coat‐hanger die is presented. Two linear and one long‐chain branched material, rheologically characterized in shear and elongation, were investigated. Using laser–Doppler velocimeter measurements of the velocity profiles across the gap height were performed at five various locations along the die. The uniformity of the velocity distribution along the die has been assessed using the maximum velocities v₀ of the corresponding velocity profiles across the gap. The velocity distribution along the die changes with throughput and temperature. Regarding the rheological properties, it was found that the power‐law index of the viscosity as a function of shear rate has a decisive influence on the uniformity of flow but that the pronounced strain hardening in elongation typical of the long‐chain branched polypropylene is not reflected by the velocity distribution along the die. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Synthesis,characterization of poly‐2‐ (2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6, 7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile: Investigation of antibacterial activity and optical properties

The oxidative polycondensation reaction conditions of 2‐(2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile were examined. The magnitude of the reflectance of the polymer decreases sharply with increasing of wavelength up to 524 nm, then reflectance of the polymer increases slowly with increasing of wavelength. The refractive index values of the polymer vary from 1.474 to 2.350. The E_p and E_d values of the polymer were found to be 4.56 and 7.068 eV, respectively. Absorption coefficient K of the polymer is of the order 817.062–1434.77 m^?1. Angle values of incidence and refraction of the polymer vary from 57.36 to 66.95° and from 23.05 to 32.65°, respectively. The film‐phase thickness of the polymer increases with increasing photon energy. The thickness, d, of the polymer was of the order 439.3–4184.7 Å for 190 and 1100 nm, respectively. The real part of dielectric constant of the polymer decreases slowly with increasing of frequency up to about 600 THz, then the real part of dielectric constant of the polymer increases sharply with increasing of frequency. The real and imaginary parts of dielectric constant of the polymer vary from 2.17 to 5.52 and from 5.81 × 10^?5 to 3.58 × 10^?4, respectively. Finally, polymer was tested for antibacterial activities against some bacteria. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Dyeing properties of textiles by Turkish hazelnut (Corylus colurna): leaves,coat, shell and dice

Turkey has a great number of hazelnut trees that possess nutritious components. However, only the inside part of the hazelnut is used as a nutrient, while the rest of it is waste. This study suggests that the waste parts of the Turkish hazelnut could be used as a natural dye for dyeing textile fabrics. The dyeing properties of the leaves, coat, shell and dice of the hazelnut were studied on wool, cotton and viscose fabric by using three different mordants: copper sulphate, iron sulphate and aluminium sulphate. The selected dyed fibre sample surfaces were observed using a scanning electron microscope. The colour strength (K/S), light, washing, rubbing, and perspiration fastness levels of the dyed fabrics were investigated. The experimental natural dyeing results indicate that waste hazelnut‐based products can be used as a natural dye for textile coloration.     

Synthesis and characterization of polyimide/hexagonal boron nitride composite

Polyimide (PI)/hexagonal boron nitride (h‐BN) composites were produced via the thermal imidization procedure from solution mixtures of a polyamicacid, which is prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 3,3′‐diaminodiphenyl sulfone (DADPS) in N‐methyl‐2‐pyrrolidone (NMP), and alkoxysilane functionalized h‐BN. The structure, thermostability, thermal behavior, and surface properties of the resulting materials were characterized by means of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM). The thermal characteristics of PI/h‐BN films were better than the pure PIs. The physical and mechanical properties of the films were evaluated by various techniques such as contact angle, chemical resistance, and tensile tests. The flame retardancy of the composite materials was also examined by the limiting oxygen index (LOI). The experiments showed that the LOI values of PIs increased from 32 to 43 for the materials containing hexagonal boron nitride. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Design of Cyclic Peptides Featuring Proline Predominantly in the cis Conformation under Physiological Conditions

Turns are secondary‐structure elements that are omnipresent in natively folded polypeptide chains. A large variety of four‐residue β‐turns exist, which differ mainly in the backbone dihedral angle values of the two central residues i+1 and i+2. The βVI‐type turns are of particular biological interest because the i+2 residue is always a proline in the cis conformation and might thus serve as target of peptidyl prolyl cis/trans isomerases (PPIases). We have designed cyclic hexapeptides containing two proline residues that predominantly adopt the cis conformation in aqueous solution. NMR data and MD calculations indicated that the cyclic peptide sequences c‐(‐D Xaa‐Ser‐Pro‐D Xaa‐Lys‐Pro‐) result in highly symmetric backbone structures when both prolines are in the cis conformation and the D ‐amino acids are either alanine or phenylalanine residues. Replacement of the serine residue either by phosphoserine or by tyrosine compromises this symmetry, but further increases the cis conformation content of both prolines. As a result, we obtained a cyclic hexapeptide that exists almost exclusively as the cis‐Pro/cis‐Pro conformer but shows no cis/trans interconversion even in the presence of the PPIase Pin1, apparently due to an energetically quite favorable but highly restricted conformational space.     

Sulfite Action in Glycolytic Inhibition: In Vivo Real‐Time Observation by Hyperpolarized 13C NMR Spectroscopy

Detecting the molecular targets of xenobiotic substances in vivo poses a considerable analytical challenge. Here, we describe the use of an NMR‐based tracer methodology for the instantaneous in vivo observation of sulfur(IV) action on cellular metabolism. Specifically, we find that glycolytic flux is directed towards sulfite adducts of dihydroxyacetone phosphate and pyruvate as off‐pathway intermediates that obstruct glycolytic flux. In particular, the pyruvate–sulfite association hinders the formation of downstream metabolites. The apparent in vivo association constant of pyruvate and sulfite agrees with the apparent inhibition constant of CO₂ formation, thus supporting the importance of pyruvate interception in disturbing central metabolism and inhibiting NAD regeneration.