Effect of bottom reflectivity on ground heat losses for solar ponds

A two-dimensional ground heat loss model is used to investigate the effect of bottom reflectivity on ground heat losses for solar ponds. In the model, convection boundary conditions are used between water and ground. The convection heat transfer coefficient is estimated using the correlations given for heated or cooled flat plates. The local rate of absorption of the solar radiation in the pond is determined for the direct and diffuse components by the exact treatment of the radiation problem. The fractions of heat adsorbed by the pond bottom that is transferred to soil and to water are investigated for different bottom reflectivities.     

Electrospun carbon nanofiber web electrode: Supercapacitor behavior in various electrolytes

Carbon nanofibers (CNFs) draw great interest due to their noticeable mechanical, electrochemical, and physical properties. In this study, polyacrylonitrile‐based CNFs are obtained via electrospinning technique. Thermal oxidation and low temperature (950 °C) carbonization are applied to the electrospun web in order to achieve CNF. Through the process, Fourier transform infrared‐attenuated total reflectance spectroscopy and Raman spectroscopic results are investigated. The electrochemical properties of the self‐standing CNF webs are examined with electrochemical impedance spectroscopy and cyclic voltammetry. In addition, various electrolyte solutions are studied to investigate the capacitive behavior of CNF webs. Electrolyte type variation has a significant effect on the capacitance results and high capacitance values are achieved in aqueous solution. According to the differing electrolyte types, specific capacitance values (C_sp) are recorded between 204 and 149 F g^?1 where maximum specific capacitance is obtained in 0.5 M H₂SO₄ as 204 F g^?1. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45723.     

NUMERICAL SIMULATION OF THREE-DIMENSIONAL LAMINAR,SQUARE TWIN-JET IMPINGEMENT ON A FLAT PLATE,FLOW STRUCTURE,AND HEAT TRANSFER

The flow and heat transfer characteristics of impinging laminar square twin jets have been investigated numerically through the solution of three-dimensional Navier-Stokes and energy equations in a steady state. The simulations have been carried out for jet-to-jet spacings of 4, 6, and 8 and for nozzle-exit-to-plate distances between 0.25D and 5D. The calculated results show that the flow structure of square twin jets impinging on a heated plate is strongly affected by the jet-to-plate distance. In addition, for very small jet-to-plate distances (L z , 0.25D), no upwash fountain flow can form at the collision point where the jets are merely diverted in the transverse direction. For such nozzle-to-plate distances the wall jet fills the whole gap between the plates with no vortex motion around the twin jets.     

Electrochemical impedance spectroscopy of poly[carbazole-co-N-p-tolylsulfonyl pyrrole] on carbon fiber microelectrodes,equivalent circuits for modelling

Polycarbazole (PCz) and copolymerization of carbazole (Cz) and N-p-tolylsulfonyl pyrrole (pTsp), P(Cz-co-pTsp), thin films have been cyclovoltammetrically coated onto carbon fiber electrodes as an active functionalized microelectrode in sodium perchlorate (NaClO₄)/acetonitrile (ACN) medium. The resulting thin films of homopolymer and copolymer were characterised by using Fourier transform infrared reflectance spectroscopy (ATR-FTIR), energy dispersive X-ray (EDX) point analysis, scanning electron microscopy (SEM) and atomic force microscopy (AFM). An electrical impedance study on the prepared electrodes is reported in the present paper under different feed ratios of [pTsp]₀/[Cz]₀ during electrochemical impedance spectroscopic (EIS) measurements. Specific capacitance (C_sp) were calculated, P(Cz-co-pTsp) in feed ratio of [pTsp]₀/[Cz]₀ = 200 has preserved more capacitive behavior especially at lower frequency (C_sp = ∼156 mF g⁻¹) than polycarbazole (C_sp = ∼2.1 mF g⁻¹. The electrochemical impedance data fitted to three different equivalent models were used to find out numerical values of the proposed components.     

Preparation and characterization of electrospun polyurethane–polypyrrole nanofibers and films

Polyurethane (PU)–polypyrrole (PPy) composite films and nanofibers were successfully prepared for the purpose of combining the properties of PU and PPy. Pyrrole (Py) monomer was polymerized and dispersed uniformly throughout the PU matrix by means of oxidative polymerization with cerium(IV) [ceric ammonium nitrate Ce(IV)] in dimethylformamide. Films and nanofibers were prepared with this solution. The effects of the PPy content on the thermal, mechanical, dielectric, and morphological properties of the composites were investigated with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), Fourier transform infrared (FTIR)–attenuated total reflection (ATR) spectroscopy, dielectric spectrometry, and scanning electron microscopy. The Young's modulus and glass-transition temperatures of the composites exhibited an increasing trend with increases in the initially added amount of Py. The electrical conductivities of the composite films and nanofibers increased. The crystallinity of the composites were followed with DSC, the mechanical properties were followed with DMA, and the spectroscopic results were followed with FTIR–ATR spectroscopy. In the composite films, a new absorption band located at about 1650 cm⁻¹ appeared, and its intensity improved with the addition of Py. The studied composites show potential for promising applications in advanced electronic devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Soluble polypyrrole copolymers

A new class of dimethyl formamide (DMF)– and acetone‐soluble conducting pyrrole–ketonic resin copolymers has been developed. This was accomplished by oxidatively polymerizing pyrrole monomer by Ce(IV) salt in the presence of methyl ethyl ketone formaldehyde resin (MEKF–R). The resulting copolymers were readily dissolved in DMF and acetone. These products were characterized by FTIR and UV‐visible spectroscopy, conductivity, four‐probe conductivity, viscosity, and DSC measurements. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1098–1106, 2001     

Characterization of pyrolysis products of harbolite and Avgamasya asphaltites: comparison with solvent extracts

The products of pyrolysis at 525 and 840 °C of two asphaltites from South-Eastern Turkey have been analysed and compared with the bitumen obtained by solvent extraction. The yield of oil product is reasonably similar for all three treatments, with gas (hydrogen, ethene, C₁C₄ alkanes and hydrogen sulphide) being liberated during pyrolysis. Greater percentages of alkanes with shorter chain lengths (along with some alkenes), and of pentane-soluble aromatic oils with reduced molecular masses, are generated during pyrolysis, at the expense of asphaltenes. The extra alkanes are generated partly by the cracking of aromatic side-chains and also from kerogen. Pyrolysis reduces the number of sulphur linkages in the oil, but nitrogen- and oxygen-containing structures are liberated from kerogen during heating.     

Effects of concomitant usage of milrinone and catecholamine for weaning from cardiopulmonary bypass

To estimate the effectiveness of concomitant usage of milrinone and catecholamine for weaning from cardiopulmonary bypass (CPB), a clinical study was made, in elective coronary artery bypass grafting (CABG) cases. 24 consecutive patients underwent elective CABG in our institute. In all cases, moderate hypothermia and cardioplegic(St. Thomas solution) cardiac arrest were performed. In 12 cases, continuous intravenous 0.25 microgram/kg/min of milrinone, 3 micrograms/kg/min of dobutamine (DOB) and dopamine (DOA) as the initial doses, were used concomitantly as inotropic agents (Group-I). The same initial doses of catecholamine (DOB and DOA) as the Group-I were administered in another 12 patients (Group-II). When the pump flow of CPB decreased to a half, these drugs were administered in both groups. Hemodynamic data were measured before CPB, just after operation, 3, 6, 12, 24, 48, and 72 hours after operation. There were no significant differences in aortic and pulmonary artery pressure between both groups. However, cardiac index (CI) of the Group-I demonstrated significantly (p < 0.01) higher values than that of Group-II until 24 hours after surgery. Systemic vascular resistance index (SVRI) of the Group-I demonstrated significantly (p < 0.01) lower value than that of Group-II from 3 to 12 hours after operation. There were no significant differences in oxygen delivery (DO2) and oxygen consumption (VO2) between both groups. These results suggested that concomitant usage of milrinone and low dose catecholamine increased CI and decreased SVRI, and made weaning from CPB very easy, demonstrating excellent hemodynamics. This high potential phosphodiesterase inhibitor may be suitable for not only weaning from CPB but also post-cardiotomy cardiogenic shock.     

Conducting polymer coated carbon surfaces and biosensor applications

This review article focuses on several approaches in the characterization and modification of carbon surfaces with electrocoated thin films which has been realized by recent progress in experimental methods. Electropolymerization and electrocopolymerization of π-conjugated polymers (pyrrole, carbazole, N-vinylcarbazole and aniline) onto carbon surfaces are reviewed with 348 references. Particular emphasis is placed on the recent nanoscale surface characterization techniques applied to the resulting electrocoated polymers onto carbon fibers (i.e., scanning electron microscopy (SEM), cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), focused ion beam-secondary ion mass spectroscopy (FIB-SIMS), Fourier transformed infrared spectroscopy (reflectance-FTIR), and Raman spectroscopic measurements).     

Reflectance FTIR and SEM characterization of poly[N-vinylcarbazole-co-methylmethacrylate] electrografted carbon fiber surface: current density effect

Electrografting of poly [N-vinylcarbazole-co-methylmethacrylate] onto high tenacity carbon fiber (TENAX HTA 5000) was carried out under preparative constant current electrolysis conditions by using anode and cathode as fiber towings. The surface morphology of the electrografted carbon fibers was determined by scanning electron microscopy (SEM). FTIR reflectance measurements (FTIR-ATR) were applied for the characterization of chemical composition on the electrografted thin film surface on carbon fiber. The efficiency of the electrocopolymerization on carbon fiber surfaces under preparative constant current electrolysis conditions were evaluated, i.e., current density (charge) vs. thickness, yield and morphology.