Influence of toxic metals on the repression of carbonaceous oxygen demand

Toxic metals like lead, bismuth, mercury and zinc-aranyl have been found to repress the carbonaceous oxygen demand. The biological seed was developed from trade waste of Glaxo Laboratories. Three concentrations: 5, 10 and 15 mg 1⁻¹ of the metals were used to observe repression of carbonaceous oxygen demand of amino acid, methionine, used as substrate. Rate constants, ratios of (t/y)^1.3 and COD: BOD were computed.     

Fabrication and characterization of Si quantum dots and SiO(2) tunnel barriers grown by a controlled oxidation process

The control of the growth of silicon dioxide (SiO(2)) and the formation of quantum dots (QDs) play an important role in the fabrication of single-electron transistors (SETs). In this work, SET?structures were fabricated using a systematic oxidation technique known as the pattern-dependent oxidation (PADOX) process. For comparison, two oxidation processes using conventional furnace and rapid thermal processing (RTP) were used. The oxidation temperature for both oxidation processes was set at 1000?°C and the oxygen flow rate in the furnace was set at 1?l?min(-1). The nanostructures were characterized using AFM, SEM and TEM to determine the quality and the stoichiometry of the Si QDs and the oxides. The oxidation rate using a furnace is 0.36?nm?s(-1), significantly lower than the RTP value which is 2.16?nm?s(-1). Meanwhile, the oxygen contents in SiO(2) grown by furnace and RTP are approximately the?same.     

Assessment of arsenic and heavy metal contents in cockles (Anadara granosa) using multivariate statistical techniques

Cockles (Anadara granosa) sample obtained from two rivers in the Penang State of Malaysia were analyzed for the content of arsenic (As) and heavy metals (Cr, Cd, Zn, Cu, Pb, and Hg) using a graphite flame atomic absorption spectrometer (GF-AAS) for Cr, Cd, Zn, Cu, Pb, As and cold vapor atomic absorption spectrometer (CV-AAS) for Hg. The two locations of interest with 20 sampling points of each location were Kuala Juru (Juru River) and Bukit Tambun (Jejawi River). Multivariate statistical techniques such as multivariate analysis of variance (MANOVA) and discriminant analysis (DA) were applied for analyzing the data. MANOVA showed a strong significant difference between the two rivers in term of As and heavy metals contents in cockles. DA gave the best result to identify the relative contribution for all parameters in discriminating (distinguishing) the two rivers. It provided an important data reduction as it used only two parameters (Zn and Cd) affording more than 72% correct assignations. Results indicated that the two rivers were different in terms of As and heavy metal contents in cockle, and the major difference was due to the contribution of Zn and Cd. A positive correlation was found between discriminate functions (DF) and Zn, Cd and Cr, whereas negative correlation was exhibited with other heavy metals. Therefore, DA allowed a reduction in the dimensionality of the data set, delineating a few indicator parameters responsible for large variations in heavy metals and arsenic content. Taking into account of these results, it can be suggested that a continuous monitoring of As and heavy metals in cockles be performed in these two rivers.     

Effective Density Characterization of Soot Agglomerates from Various Sources and Comparison to Aggregation Theory

Soot particle (black carbon) morphology is of dual interest, both from a health perspective and due to the influence of soot on the global climate. In this study, the mass-mobility relationships, and thus effective densities, of soot agglomerates from three types of soot emitting sources were determined in situ by combining a differential mobility analyzer (DMA) and an aerosol particle mass analyzer (APM). High-resolution transmission electron microscopy was also used. The soot sources were diesel engines, diffusion flame soot generators, and tapered candles, operated under varying conditions. The soot microstructure was found to be similar for all sources and settings tested, with a distance between the graphene layers of 3.7–3.8 Å. The particle specific surface area was found to vary from 100 to 260 m²/g. The particle mass-mobility relationship could be described by a power law function with an average exponent of 2.3 (±0.1) for sources with a volatile mass fraction <10% and primary particle sizes of 11–29 nm. The diesel exhaust from a heavy duty engine at idling had a substantially higher volatile mass fraction and a higher mass-mobility exponent of 2.6. The mass-mobility exponent was essentially independent of the number of primary particles in the range covered (N_pp = 10–1000). Despite the similar exponents, the effective density varied substantially from source to source. Two parameters were found to alter the effective density: primary particle size and coating mass fraction. A correlation was found between primary particle size and mass-mobility relationship/effective density and an empirical expression relating these parameters is presented. The effects on the DMA-APM results of doubly charged particles and DMA agglomerate alignment were investigated and quantified. Finally, the dataset was compared to three theoretical approaches describing agglomerate particles’ mass-mobility relationship.

Copyright 2013 American Association for Aerosol Research     

Survival,growth characteristics and bioactive potential of Lactobacillus acidophilus in a soy‐based cream cheese

BACKGROUND: Soy‐based products have received much attention lately as dairy replacers and carriers for probiotics, without the cholesterol and lactose intolerance factors. We have previously developed a soy cream cheese product and would like to evaluate its suitability as a carrier for probiotic microorganisms. Soy cream cheese is commercially uncommon, while a probiotic soy cream cheese is yet to be available in the market. RESULTS: Five strains of probiotics were screened for their α‐galactosidase activity. Lactobacillus acidophilus FTCC 0291 showed the highest α‐galactosidase‐specific activity and was incorporated into soy cream cheese for a storage study of 20 days at 25 and 4 °C. L. acidophilus FTCC 0291 in soy cream cheese at both storage temperatures maintained a viability exceeding 10⁷ CFU g^?1 over storage. Oligosaccharide and reducing sugar analyses indicated that L. acidophilus FTCC 0291 was capable of utilizing the existing reducing sugars in soymilk and concurrently hydrolyzing the oligosaccharides into simpler sugars for growth. L. acidophilus FTCC 0291 also produced organic acids, leading to decreased pH. Under low pH and high organic acid concentration, the growth of total aerobes and anaerobes was significantly (P < 0.05) suppressed compared to the control. The hydrolysis of protein in soymilk produced essential growth factors such as peptides and amino acids that may have promoted the growth of L. acidophilus FTCC 0291 and the release of bioactive peptides with in vitro angiotensin I‐converting enzyme inhibitory activity. CONCLUSION: This study showed that soy cream cheese could be used as a carrier for probiotic bacteria, with potential antihypertensive property. Copyright © 2009 Society of Chemical Industry     

Structural and physical properties of Ni–Tb–Fe–O system

A series of soft ferrites in the system Ni_1 ? xTb_xFe₂O₄ (0 ≤ x ≤ 0.2), was prepared by a standard ceramic technique. The influence of terbium content was investigated by means of X-ray diffraction, Fourier Transform Infrared (FTIR) spectroscopy and scanning electron microscopy. The X-ray diffraction analysis reveals that the samples have a cubic spinel (single phase) structure for 0 ≤ x ≤ 0.08; for x > 0.08 a small peak of orthorhombic phase (TbFeO₃) appears and becomes more conspicuous with increased terbium substitution. The lattice parameter changes in a non-linear way as a function of terbium content which may be attributed to differences in the ionic radii of the cations involved and the solubility limit of terbium ions. A gradual increase in the bulk density was observed with the increase of terbium concentration, from 5.13 g/cm³ to 5.69 g/cm³. FTIR absorption spectra of the Ni–Tb–Fe–O system were investigated in the wave number range 370–1500 cm^? 1. Each spectrum exhibited two main absorption bands, thereby confirming the spinel structure.     

Dioxonaphthoimidazoliums are Potent and Selective Rogue Stem Cell Clearing Agents with SOX2‐Suppressing Properties

Pluripotent stem cells are uniquely positioned for regenerative medicine, but their clinical potential can only be realized if their tumorigenic tendencies are decoupled from their pluripotent properties. Deploying small molecules to remove remnant undifferentiated pluripotent cells, which would otherwise transform into teratomas and teratomacarcinomas, offers several advantages over non‐pharmacological methods. Dioxonapthoimidazolium YM155, a survivin suppressant, induced selective and potent cell death of undifferentiated stem cells. Herein, the structural requirements for stemotoxicity were investigated and found to be closely aligned with those essential for cytotoxicity in malignant cells. There was a critical reliance on the quinone and imidazolium moieties but a lesser dependence on ring substituents, which served mainly to fine‐tune activity. Several potent analogues were identified which, like YM155, suppressed survivin and decreased SOX2 in stem cells. The decrease in SOX2 would cause an imbalance in pluripotent factors that could potentially prompt cells to differentiate and hence decrease the risk of aberrant teratoma formation. As phosphorylation of the NF‐κB p50 subunit was also suppressed, the crosstalk between phospho‐p50, SOX2, and survivin could implicate a causal role for NF‐κB signaling in mediating the stem cell clearing properties of dioxonaphthoimidazoliums.     

Reduced Efficiency Roll‐Off and Improved Stability of Mixed 2D/3D Perovskite Light Emitting Diodes by Balancing Charge Injection

Perovskite light emitting diodes (PeLEDs) have reached external quantum efficiencies (EQEs) over 21%. Their EQE, however, drops at increasing current densities (J) and their lifetime is still limited to just a few hours. The mechanisms leading to EQE roll‐off and device instability require thorough investigation. Here, improvement in EQE, EQE roll‐off, and lifetime of PeLEDs is demonstrated by tuning the balance of electron/hole transport into a mixed 2D/3D perovskite emissive layer. The mixed 2D/3D perovskite layer induces exciton confinement and beneficially influences the electron/hole distribution inside the perovskite layer. By tuning the electron injection to match the hole injection in such active layer, a nearly flat EQE for J = 0.1–200 mA cm^?2, a reduced EQE roll‐off until J = 250 mA cm^?2, and a half‐lifetime of ≈47 h at J = 10 mA cm^?2 is reached. A model is also proposed to explain these improvements that account for the spatial electron/hole distributions.