3D Simulation Research on Urea-SCR DeNO<em>x Catalyst for Diesel Engine

In order to reduce oxides of nitrogen (NOx) emanated from a diesel eng ine, a comprehensive urea selective catalyst reduction (SCR) DeNOx catalys t was modeled in which numerical simulations were used as a complementary tool f or the experimental investigations to make the design decisions, and hence short en the development process. In this approach, relevant conversion reactions were studied in 1D model, and the parameters obtained in this way were transferred t o 3D simulations. According to the results ...     

Hydrodynamics and mass transfer in a bubble column with an organic liquid

Hydrodynamic and mass transfer data in Soltrol-130 (a mixture of C₉+ iso-paraffins) were measured in a 0.305 m diameter bubble column. The gas holdup structure (i.e., the contributions to holdup from the small and large bubble fractions of the dispersion) for this hydrocarbon liquid in the churn turbulent flow regime was analyzed using the dynamic gas disengagement technique. The validity of the assumption of axially uniform gas holdup structure was checked. Literature correlations were found inadequate to explain the observed gas holdup and the volumetric mass transfer coefficients for Soltrol-130. The volumetric mass transfer coefficient per unit volume of large bubbles is shown to be independent of superficial gas velocity for the fully developed churn turbulent regime. The present hydrodynamic and mass transfer data in the churn turbulent regime should be useful in the design and scale-up of bubble columns used in organic process industries.     

Criteria for axial dispersion effects in adiabatic trickle bed hydroprocessing reactors

This paper first outlines an approximate solution to the governing equations for an adiabatic hydroprocessing trickle bed reactor operating in the presence of axial dispersion. The approximate solution agrees very well with the rigorous numerical solution for Peclet numbers greater than approximately three.Using the approximate solution, criteria for significant axial dispersion effect are obtained. These criteria indicate that at high conversions, an adiabatic operation produces a larger axial dispersion effect than the isothermal operation. At low conversions, opposite results are obtained.The derived criteria are used to evaluate the orders of magnitude of Peclet number required to avoid axial dispersion effect in pilot scale adiabatic reactors for (a) residual hydrodesulfurization (b) hydrocracking of gas oils and (c) denitrogenation of shale oils. The calculations indicate that the axial dispersion effect is of less importance in case (c) than in cases (a) and (b).Finally, the role of heat effects on the axial dispersion in a vapor phase fixed bed adiabatic reactor is evaluated.     

DPV: a taxonomy for utilizing deep learning as a prediction technique for various types of cancers detection

Multimedia Tools and Applications - Deep learning (DL) is a type of machine learning capable of processing large quantities of data to provide analytic results based on a particular...     

Generic Adaptive Sliding Mode Control for a Quadrotor UAV System Subject to Severe Parametric Uncertainties and Fully Unknown External Disturbance

International Journal of Control, Automation and Systems - This paper aims to provide a generic robust controller that is able to manipulate all kinds of quadrotor unmanned aerial vehicle (UAV)...     

Ultrahigh molecular weight polyethylene with improved crosslink density,oxidation stability,and microbial inhibition by chemical crosslinking and tea polyphenols for total joint replacements

Highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) stabilized by vitamin E (VE) is widely applied in artificial joints as the bearings. Despite the approval, there is a discord that VE lowers the crosslinking efficiency, limiting its use at high concentration. In this work, we aim to obtain highly crosslinked and oxidation resistant UHMWPE through the conjunction of tea polyphenol and chemical crosslinking. We hypothesized that highly incorporated tea polyphenol with multiple reactive sites can ameliorate crosslinking efficiency of chemical crosslinked UHMWPE in comparison to VE. Epigallocatechin gallate (EGCG) as representative tea polyphenol was incorporated into UHMWPE at high concentration (2–8 wt%), followed by chemical crosslinking with 2 wt% organic peroxide. Unlike VE/UHMWPE blends as the control, chemical crosslinking achieved an increasing trend in crosslink density of EGCG/UHMWPE blends with increasing antioxidant concentration. High concentration of EGCG also enhanced the oxidation stability of UHMWPE. Intriguingly, EGCG endowed UHMWPE with an excellent antimicrobial property, which was inefficient in VE/UHMWPE. Cell viability was hardly affected by the high loaded antioxidant and peroxide. The chemically crosslinked UHMWPE blended with EGCG is proved to be a reasonable, cost effective and realistic alternative for use in artificial joints.     

YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray

Yttrium aluminium garnet (YAG) is a promising topcoat material for thermal barrier coatings due to its high temperature stability and better CMAS (calcium-magnesium-alumino-silicate) resistance. YAG topcoats were deposited by suspension and solution precursor high-velocity oxy-fuel (HVOF) thermal spray. The relationships between processing, microstructure and final properties were studied through a range of characterization techniques and thermal cycling tests. The microstructure of the as-sprayed YAG topcoat from stoichiometric solution precursor (SP-YAG) had distributed pores and inter-splat boundaries, while the as-sprayed topcoat produced from suspension (S-YAG) had vertical and branched micro cracks, pores, and inter-splat boundaries. Both as-sprayed coatings were composed of amorphous phase, hexagonal yttrium aluminium perovskite (YAP) and cubic YAG. In thermal cycling tests, 20% of SP-YAG failure was reached after the 10th cycle; whereas, S-YAG reached the failure criteria between the 60th and 70th cycle. The failure of both the SP-YAG and the S-YAG topcoats occurred due to thermal stresses during the thermal cycling.     

Delay and link utilization aware routing protocol for wireless multimedia sensor networks

Wireless Multimedia Sensor Networks (WMSNs) consist of networks of interconnected devices involved in retrieving multimedia content, such as, video, audio, acoustic, and scalar data, from the environment. The goal of these networks is optimized delivery of multimedia content based on quality of service (QoS) parameters, such as delay, jitter and distortion. In multimedia communications each packet has strict playout deadlines, thus late arriving packets and lost packets are treated equally. It is a challenging task to guarantee soft delay deadlines along with energy minimization, in resource constrained, high data rate WMSNs. Conventional layered approach does not provide optimal solution for guaranteeing soft delay deadlines due to the large amount of overhead involved at each layer. Cross layer approach is fast gaining popularity, due to its ability to exploit the interdependence between different layers, to guarantee QoS constraints like latency, distortion, reliability, throughput and error rate. The paper presents a channel utilization and delay aware routing (CUDAR) protocol for WMSNs. This protocol is based on a cross-layer approach, which provides soft end-to-end delay guarantees along with efficient utilization of resources. Extensive simulation analysis of CUDAR shows that it provides better delay guarantees than existing protocols and consequently reduces jitter and distortion in WMSN communication.     

A cross-layer approach for partition detection at overlay layer for structured P2P in MANETs

Due to limited radio range and mobility of nodes in mobile ad hoc networks (MANETs), the network partitioning and merging could occur frequently. When structured peer-to-peer (P2P) overlays are running over MANETs, then network partition in the physical network can also cause network partition at the overlay layer. Existing approaches for structured P2P overlay over MANETs do not detect network partition at the overlay layer. This paper proposes a cross-layer approach to detect network partition at the overlay layer for structured P2P overlay over MANETs. Simulation results show that the proposed approach is highly effective and efficient in terms of routing overhead, success ratio and false-negative ratio.