Nb掺杂YBCO薄膜钉扎机理的研究

通过低氟MOD法制备了Nb掺杂的YBa₂Cu₃O_7-x(YBCO)薄膜, 掺入的Nb以Ba₂YNbO₆(BYNO)相存在, 其尺寸大小在20~30 nm之间, 薄膜中BYNO纳米颗粒以外延和随机两种取向共存, 且以随机取向为主。BYNO纳米颗粒的周围出现堆垛层错, 并且BYNO周围的YBCO出现严重的晶格畸变, 这增加了YBCO薄膜内部的微观应变, 且随机BYNO颗粒含量越高, YBCO薄膜内部的微观应变就越大。微观应变增加了薄膜的磁通钉扎能力, 进而提高了薄膜在高磁场下的超导性能。     

Citrulline malate supplementation does not improve German Volume Training performance or reduce muscle soreness in moderately trained males and females

Background

Use of supplements to aid performance is common practice amongst recreationally active individuals, including those without a sufficient evidence base. This investigation sought to assess whether acute supplementation with 8 g of citrulline malate (CM) (1.11: 1 ratio) would improve anaerobic performance.

Methods

A randomised double blind placebo control trial was employed, using a counterbalanced design. We recruited recreationally active men and women to take part in an isokinetic chair protocol, based on German Volume Training (GVT) whereby participants attempted to perform 10 sets of 10 repetitions against a force representing 70% of their peak concentric force.

Results

The number of repetitions achieved over the course of the GVT was 94.0?±?7.9 and 90.9?±?13.9 for placebo and CM respectively. There was no significant difference between the placebo and CM treatment for number of repetitions (P?=?0.33), isometric (P?=?0.60), concentric (P?=?0.38), or eccentric (P?=?0.65) peak force following the GVT. Total muscle soreness was significantly higher in the CM compared to the placebo treatment following the GVT protocol over 72 h (P?=?0.01); although this was not accompanied by a greater workload/number of repetitions in the CM group.

Conclusions

We conclude that an acute dose of CM does not significantly affect anaerobic performance using an isokinetic chair in recreational active participants. Practical implications include precaution in recommending CM supplementation. Coaches and athletes should be aware of the disparity between the chemical analyses of the products reviewed in the present investigation versus the manufacturers’ claims.

     

Physical and chemical modification of distillery sludge for Pb(II) biosorption

The waste distillery sludge from sugar-cane industry was pretreated physically (boiled, heated and autoclaved) as well as chemically (HCl, H(2)SO(4), H(3)PO(4), NaOH, Ca(OH)(2), Al(OH)(3), C(6)H(6), HCHO, CH(3)OH and C1(2)H(25)OSO(3)Na (sodium dodecyl sulphate (SDS)) for assessing the comparative sorption capacity of untreated and modified distillery sludge for Pb(II) biosorption from aqueous solutions. Experiments were conducted in shake flasks on a batch basis to access the effect of different experimental parameters such as pH, biosorbent dosage, biosorbent size, initial Pb(II) concentration and contact time. The uptake capacity 'q' (mg/g) of untreated and pretreated distillery sludge was in following order: NaOH (51.29+/-1.21)>HCl (49.82+/-1.22)>HCHO (49.56+/-1.14)>H(2)SO(4) (47.71+/-1.20)>HgCl(2) (45.32+/-1.06)>Ca(OH)(2) (44.01+/-1.18)>MeOH (43.73+/-1.23)>C(6)H(6) (42.72+/-1.19)>H(3)PO(4) (42.01+/-1.17)>SDS (40.87+/-1.27)>autoclaved (40.23+/-1.24)>Boiled (39.95+/-1.19)>heated (38.87+/-1.32)>Al (OH)(3) (38.30+/-1.14)>untreated (37.76+/-1.21). In further parameter studies, the optimized biosorbent size was 0.250 mm at pH 5 and best dose was 0.05 g of biosorbent. The applicability of the Langmuir and Freundlich models for sorption process was tested and best fitted model was Langmuir with the coefficient of determination (R(2)) value, 0.97, the process followed second order kinetic mechanism.     

Three-dimensional video compression using subband/wavelet transformwith lower buffering requirements

Three-dimensional (3-D) video compression using wavelets decomposition along the temporal axis dictates that a number of video frames must be buffered to allow for the temporal decomposition. Buffering of frames allows for the temporal correlation to be made use of, and the larger the buffer the more effective the decomposition. One problem inherent in such a set up in interactive applications such as video conferencing, is that buffering translates into a corresponding time delay. We show that 3-D coding of such image sequences can be achieved in the true sense of temporal direction decomposition but with much less buffering requirements. For a practical coder, this can be achieved by introducing an approximation to the way the transform coefficients are encoded. Applying wavelet decomposition using some types of filters may introduce edge errors, which become more prominent in short signal segments. We also present a solution to this problem for the Daubechies (1988) family of filters.     

Melatonin Modulates Plant Tolerance to Heavy Metal Stress: Morphological Responses to Molecular Mechanisms

Heavy metal toxicity is one of the most devastating abiotic stresses. Heavy metals cause serious damage to plant growth and productivity, which is a major problem for sustainable agriculture. It adversely affects plant molecular physiology and biochemistry by generating osmotic stress, ionic imbalance, oxidative stress, membrane disorganization, cellular toxicity, and metabolic homeostasis. To improve and stimulate plant tolerance to heavy metal stress, the application of biostimulants can be an effective approach without threatening the ecosystem. Melatonin (N-acetyl-5-methoxytryptamine), a biostimulator, plant growth regulator, and antioxidant, promotes plant tolerance to heavy metal stress by improving redox and nutrient homeostasis, osmotic balance, and primary and secondary metabolism. It is important to perceive the complete and detailed regulatory mechanisms of exogenous and endogenous melatonin-mediated heavy metal-toxicity mitigation in plants to identify potential research gaps that should be addressed in the future. This review provides a novel insight to understand the multifunctional role of melatonin in reducing heavy metal stress and the underlying molecular mechanisms.     

Gelatin controversies in food,pharmaceuticals, and personal care products: Authentication methods,current status,and future challenges

Gelatin is a highly purified animal protein of pig, cow, and fish origins and is extensively used in food, pharmaceuticals, and personal care products. However, the acceptability of gelatin products greatly depends on the animal sources of the gelatin. Porcine and bovine gelatins have attractive features but limited acceptance because of religious prohibitions and potential zoonotic threats, whereas fish gelatin is welcomed in all religions and cultures. Thus, source authentication is a must for gelatin products but it is greatly challenging due to the breakdown of both protein and DNA biomarkers in processed gelatins. Therefore, several methods have been proposed for gelatin identification, but a comprehensive and systematic document that includes all of the techniques does not exist. This up-to-date review addresses this research gap and presents, in an accessible format, the major gelatin source authentication techniques, which are primarily nucleic acid and protein based. Instead of presenting these methods in paragraph form which needs much attention in reading, the major methods are schematically depicted, and their comparative features are tabulated. Future technologies are forecasted, and challenges are outlined. Overall, this review paper has the merit to serve as a reference guide for the production and application of gelatin in academia and industry and will act as a platform for the development of improved methods for gelatin authentication.     

De Novo Missense Mutations in TNNC1 and TNNI3 Causing Severe Infantile Cardiomyopathy Affect Myofilament Structure and Function and Are Modulated by Troponin Targeting Agents

Rare pediatric non-compaction and restrictive cardiomyopathy are usually associated with a rapid and severe disease progression. While the non-compaction phenotype is characterized by structural defects and is correlated with systolic dysfunction, the restrictive phenotype exhibits diastolic dysfunction. The molecular mechanisms are poorly understood. Target genes encode among others, the cardiac troponin subunits forming the main regulatory protein complex of the thin filament for muscle contraction. Here, we compare the molecular effects of two infantile de novo point mutations in TNNC1 (p.cTnC-G34S) and TNNI3 (p.cTnI-D127Y) leading to severe non-compaction and restrictive phenotypes, respectively. We used skinned cardiomyocytes, skinned fibers, and reconstituted thin filaments to measure the impact of the mutations on contractile function. We investigated the interaction of these troponin variants with actin and their inter-subunit interactions, as well as the structural integrity of reconstituted thin filaments. Both mutations exhibited similar functional and structural impairments, though the patients developed different phenotypes. Furthermore, the protein quality control system was affected, as shown for TnC-G34S using patient’s myocardial tissue samples. The two troponin targeting agents levosimendan and green tea extract (-)-epigallocatechin-3-gallate (EGCg) stabilized the structural integrity of reconstituted thin filaments and ameliorated contractile function in vitro in some, but not all, aspects to a similar degree for both mutations.     

Antimicrobial Peptides from Plants: A cDNA-Library Based Isolation,Purification, Characterization Approach and Elucidating Their Modes of Action

Even in a natural ecosystem, plants are continuously threatened by various microbial diseases. To save themselves from these diverse infections, plants build a robust, multilayered immune system through their natural chemical compounds. Among the several crucial bioactive compounds possessed by plants’ immune systems, antimicrobial peptides (AMPs) rank in the first tier. These AMPs are environmentally friendly, anti-pathogenic, and do not bring harm to humans. Antimicrobial peptides can be isolated in several ways, but recombinant protein production has become increasingly popular in recent years, with the Escherichia coli expression system being the most widely used. However, the efficacy of this expression system is compromised due to the difficulty of removing endotoxin from its system. Therefore, this review suggests a high-throughput cDNA library-based plant-derived AMP isolation technique using the Bacillus subtilis expression system. This method can be performed for large-scale screening of plant sources to classify unique or homologous AMPs for the agronomic and applied field of plant studies. Furthermore, this review also focuses on the efficacy of plant AMPs, which are dependent on their numerous modes of action and exceptional structural stability to function against a wide range of invaders. To conclude, the findings from this study will be useful in investigating how novel AMPs are distributed among plants and provide detailed guidelines for an effective screening strategy of AMPs.     

Elemental analyses and determination of lead content in kohl (stone) by laser-induced breakdown spectroscopy

Elemental analyses of kohl (stone) samples collected from three different parts of the world were performed using laser-induced breakdown spectroscopy (LIBS). The analyses indicated that lead (Pb), copper (Cu), silver (Ag), iron (Fe), calcium (Ca), aluminum (Al), silicon (Si), and sodium (Na) were present in all the kohl samples. In addition to these elements, the sample from Madina, Kingdom of Saudi Arabia (KSA), contained the elements tin (Sn), zirconium (Zr), and antimony (Sb). The sample from Mount Toor, Egypt, also contained Sn. Also, quantitative analysis for lead was carried out by the standard addition method using the LIBS technique. The result showed the presence of 14.12 ± 0.28% by weight of Pb in the sample from Madina, which compares well with the measurement done using atomic absorption spectroscopy (AAS) (13.31 ± 0.46%). The standard addition method used three calibration curves drawn for three emission lines of the LIBS spectra of Pb. The limits of detection (LoD) for these calibration curves varied from 0.27% to 1.16% by weight. The lead contents of the samples from Mount Toor and the local market of Bangladesh were also measured by the AAS technique, and the results were 14.61 ± 0.48% and 8.98 ± 0.35% by weight, respectively. The reason for determining only the lead content in kohl, which may be used as an eye cosmetic, is the adverse effect that lead has on health.     

Thermal performance of a novel rooftop solar micro-concentrating collector

Concentrating solar thermal systems offer a promising method for large scale solar energy collection. Although concentrating collectors are generally thought of as large-scale stand-alone systems, there is a huge opportunity to use novel concentrating solar thermal systems for rooftop applications such as domestic hot water, industrial process heat and solar air conditioning for commercial, industrial and institutional buildings. This paper describes the thermal performance of a new low-cost solar thermal micro-concentrating collector (MCT), which uses linear Fresnel reflectors, and is designed to operate at temperatures up to 220 °C. The modules of this collector system are approximately 3 m long by 1 m wide and 0.3 m high. The objective of the study is to optimise the design to maximise the overall thermal efficiency. The absorber is contained in a sealed enclosure to minimise convective losses. The main heat losses are due to natural convection inside the enclosure and radiation heat transfer from the absorber tube. In this paper we present the results of a computational and experimental investigation of radiation and convection heat transfer in order to understand the heat loss mechanisms. A computational model for the prototype collector has been developed using ANSYS–CFX, a commercial computational fluid dynamics software package. The numerical results are compared to experimental measurements of the heat loss from the absorber, and flow visualisation within the cavity. This paper also presents new correlations for the Nusselt number as a function of Rayleigh number.