Set-Dueling-Controlled Adaptive Insertion for High-Performance Caching

The commonly used LRU replacement policy causes thrashing for memory- intensive workloads. A simple mechanism that dynamically changes the insertion policy used by LRU replacement reduces cache misses by 21 percent and requires a total storage overhead of less than 2 bytes.     

Theoretical Investigation of Cubic BaVO<Subscript>3</Subscript> and LaVO<Subscript>3</Subscript> Perovskites via Tran–Blaha-Modified Becke–Johnson Exchange Potential Approach

The full potential linearized augmented plane wave method of density functional theory has been used to investigate the structural, electronic, magnetic and thermoelectric properties of cubic perovskites BaVO₃ and LaVO₃. The ferromagnetic ground state has been found to be stable by comparing the total energies of non-spin-polarized and spin-polarized calculations performed for optimized unit cells. For both compounds, the bond length and tolerance factor are also measured. From the band structures and density of states plots, it is found that both compounds are half-metallic. We found that the presence of V at the octahedral site of these perovskites develops exchange splitting through p-d hybridization, which results in a stable ferromagnetic state. The observed exchange splitting is further clarified from the magnetic moment, charge and spin of the anion and cations. Finally, we also presented the calculated thermoelectric properties of these materials, which show that half-metallic BaVO₃ and LaVO₃ materials are potential contenders for thermoelectric applications.     

Effect of Ag‐NPs synthesised by Chamaemelum nobile extract on the inflammation and oxidative stress induced by carrageenan in mice paw

An environmentally friendly and rapid procedure was developed to synthesise silver nanoparticles (Ag‐NPs) by Chamaemelum nobile extract and to evaluate its in vivo anti‐inflammatory and antioxidant activities. The ultraviolet–visible absorption spectrum of the synthesised Ag‐NPs showed an absorbance peak at 422. The average size of spherical nanoparticles was 24 nm as revealed by transmission electron microscopy. Fourier transform infra‐red spectroscopy analysis supported the presence of biological active compounds involved in the reduction of Ag ion and X‐ray diffraction confirmed the crystalline structure of the metallic Ag. The anti‐inflammatory and antioxidant activity of the Ag‐NPs was investigated against carrageenan‐induced paw oedema in mice. The levels of malondialdehyde (MDA) and antioxidant enzymes superoxide dismutase, catalase, glutathione peroxidase and inflammatory cytokines tumour necrosis factor (TNF‐α), interferon gamma and interleukin (IL)‐6, IL‐1β were assessed in this respect. The results demonstrated that anti‐inflammatory activity of the Ag‐NPs might be due to the ability of the nanoparticles to reduce IL‐1β, IL‐6 and TNF‐α. Moreover, reduction of antioxidant enzymes along with an increase in MDA level shows that the anti‐inflammatory activity of the synthesised Ag‐NPs by C. nobile is attributed to its ameliorating effect on the oxidative damage.Inspec keywords: silver, nanoparticles, nanofabrication, ultraviolet spectra, visible spectra, particle size, transmission electron microscopy, Fourier transform infrared spectra, X‐ray diffraction, crystal structure, enzymes, molecular biophysics, tumours, biomedical materials, nanomedicineOther keywords: Chamaemelum nobile extract, oxidative stress, mice paw, silver nanoparticles, antiinflammatory activity, antioxidant activity, ultraviolet‐visible absorption spectrum, spherical nanoparticle size, transmission electron microscopy, Fourier transform infrared spectroscopy, biological active compounds, X‐ray diffraction, crystalline structure, carrageenan‐induced paw oedema, malondialdehyde, antioxidant enzymes, superoxide dismutase, catalase, glutathione peroxidase, inflammatory cytokines, tumour necrosis factor, interferon gamma, interleukin, IL‐1β, IL‐6, TNF‐α, MDA level, Ag     

Growth and optical properties of In x Ga1−x P nanowires synthesized by selective-area epitaxy

Ternary Ⅲ-Ⅴ nanowires (NWs) cover a wide range of wavelengths in the solar spectrum and would greatly benefit from being synthesized as position-controlled arrays for improved vertical yield,reprodudbility,and tunable optical absorption.Here,we report on successful selective-area epitaxy of metal-particle-free vertical InxGa1-xP NW arrays using metal-organic vapor phase epitaxy and detail their optical properties.A systematic growth study establishes the range of suitable growth parameters to obtain uniform NW growth over a large array.The optical properties of the NWs were characterized by room-temperature cathodoluminescence spectroscopy.Tunability of the emission wavelength from 870 nm to approximately 800 nm was achieved.Transmission electron microscopy and energy dispersive X-ray measurements performed on crosssection samples revealed a pure wurtzite crystal structure with very few stacking faults and a slight composition gradient along the NW growth axis.     

A short note on the effect of sample size on the estimation error in Cp

Process capability indices such as C_p are used extensively in manufacturing industries to assess processes in order to decide about purchasing. In practice, the parameter for calculating C_p is rarely known and is frequently replaced with estimates from an in-control reference sample. This article explores the optimal sample size required to achieve a desired error of estimation using absolute percentage error of different C_p estimates. Moreover, some practical tools are created to allow practitioners to find sample size in different situations.     

Surface characterization and biological properties of regular dentin,demineralized dentin,and deproteinized dentin

Bone autografts are often used for reconstruction of bone defects; however, due to the limitations of autografts, researchers have been in search of bone substitutes. Dentin is of particular interest for this purpose due to high similarity to bone. This in vitro study sought to assess the surface characteristics and biological properties of dentin samples prepared with different treatments. This study was conducted on regular (RD), demineralized (DemD), and deproteinized (DepD) dentin samples. X-ray diffraction and Fourier transform infrared spectroscopy were used for surface characterization. Samples were immersed in simulated body fluid, and their bioactivity was evaluated under a scanning electron microscope. The methyl thiazol tetrazolium assay, scanning electron microscope analysis and quantitative real-time polymerase chain reaction were performed, respectively to assess viability/proliferation, adhesion/morphology and osteoblast differentiation of cultured human dental pulp stem cells on dentin powders. Of the three dentin samples, DepD showed the highest and RD showed the lowest rate of formation and deposition of hydroxyapatite crystals. Although, the difference in superficial apatite was not significant among samples, functional groups on the surface, however, were more distinct on DepD. At four weeks, hydroxyapatite deposits were noted as needle-shaped accumulations on DemD sample and numerous hexagonal HA deposit masses were seen, covering the surface of DepD. The methyl thiazol tetrazolium, scanning electron microscope, and quantitative real-time polymerase chain reaction analyses during the 10-day cell culture on dentin powders showed the highest cell adhesion and viability and rapid differentiation in DepD. Based on the parameters evaluated in this in vitro study, DepD showed high rate of formation/deposition of hydroxyapatite crystals and adhesion/viability/osteogenic differentiation of human dental pulp stem cells, which may support its osteoinductive/osteoconductive potential for bone regeneration.     

Intelligent Firefly Algorithm Deep Transfer Learning Based COVID-19 Monitoring System

With the increasing and rapid growth rate of COVID-19 cases, the healthcare scheme of several developed countries have reached the point of collapse. An important and critical steps in fighting against COVID-19 is powerful screening of diseased patients, in such a way that positive patient can be treated and isolated. A chest radiology image-based diagnosis scheme might have several benefits over traditional approach. The accomplishment of artificial intelligence (AI) based techniques in automated diagnoses in the healthcare sector and rapid increase in COVID-19 cases have demanded the requirement of AI based automated diagnosis and recognition systems. This study develops an Intelligent Firefly Algorithm Deep Transfer Learning Based COVID-19 Monitoring System (IFFA-DTLMS). The proposed IFFA-DTLMS model majorly aims at identifying and categorizing the occurrence of COVID19 on chest radiographs. To attain this, the presented IFFA-DTLMS model primarily applies densely connected networks (DenseNet121) model to generate a collection of feature vectors. In addition, the firefly algorithm (FFA) is applied for the hyper parameter optimization of DenseNet121 model. Moreover, autoencoder-long short term memory (AE-LSTM) model is exploited for the classification and identification of COVID19. For ensuring the enhanced performance of the IFFA-DTLMS model, a wide-ranging experiments were performed and the results are reviewed under distinctive aspects. The experimental value reports the betterment of IFFA-DTLMS model over recent approaches.