Surface modification of Zr-based bulk amorphous alloys by using ion irradiation

Surfaces of the [Zr_0.65Cu_0.18Ni_0.09Al_0.08]₉₈M₂ (M = Er and Gd) bulk amorphous alloys were modified by irradiation with energetic singly charged argon (Ar⁺) ions. Samples of both the alloys were irradiated with 2.17 × 10¹⁷ argon ions of 10 keV energy. As cast and ion irradiated samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Mechanical properties like Vicker's hardness, nanohardness, elastic modulus and elastic recovery were measured. Considerable increase in elastic modulus and hardness was observed because of ion irradiation in these alloys. The ion irradiated samples of the [Zr_0.65Cu_0.18Ni_0.09Al_0.08]₉₈Er₂ alloy showed better properties as compared to [Zr_0.65Cu_0.18Ni_0.09Al_0.08]₉₈Gd₂ alloy. CuZr₂ phase was detected in ion irradiated alloys by XRD and confirmed by EDS. The range of Ar⁺ ions was found to be approximately 9.3 ± 5.4 nm in both alloys.     

Effect of prior compression treatment on the deformation behavior of Zr based bulk metallic glass

In the present work, the plasticity of Zr_64.2Cu_11.2 Ni_14.6Al₁₀ bulk metallic glass was enhanced through prior compression treatment. A considerably large compressive plastic deformation (over 6.5%) was achieved by pressing Zr_64.2Cu_11.2 Ni_14.6Al₁₀ bulk metallic glass laterally in specially designed tool steel die before compression test. Numerical analysis was also carried out to investigate the stress distribution under same mechanical conditions. It was revealed that the lateral pressing induced structural heterogeneity and high stress gradients facilitate large plastic strains through the generation of dense multiple shear band network.     

Synthesis by ball milling and characterization of Al-Zn alloys

Mechanical ball milling is a useful technique for systems with positive enthalpy of mixing. With this technique solubility of a solute in a solid solution can be enhanced. Al-Zn system has positive heat of mixing. High energy ball milling has been employed to produce four alloys of Al with 2.5 to 10 wt% Zn. Powders of Al (1–125 m) and Zn (0.7–5.0 m) were mixed together in the desired proportion and milled with a powder to ball weight ratio of 1:20. The size and shape of the particles of as-received and alloy powders were examined in a scanning electron microscope (SEM) while their microanalysis was performed by energy dispersive system (EDS) attached with SEM. It has been observed that 120 h of milling of the powders produced homogeneous alloys. X-ray diffraction (XRD) patterns confirm complete solubility up to 10 wt% Zn in Al. Using the quasi-chemical theory of binary solid solutions, the enthalpy of mixing of 10 wt% Zn in Al has been determined to be 276 cals/mol. It is shown that stress exerted by very high density of dislocations, generated by mechanical milling, plays a major role in the enhancement of solubility. Hardness has been measured and it increases with increasing solute content.     

Control charts for the shape parameter of reflected power function distribution under classical estimators

The reflected power function distribution (RPFD) has applications in the fields of reliability engineering and survival analysis. To identify and remove the variation in different reliability processes and also to monitor the reliability of machines where the number of errors follows RPFD, we develop control charts to keep the process in control. A memory less control chart like a Shewhart control chart, and two memory-based control charts like an exponentially weighted moving average (EWMA) control chart and a hybrid exponentially weighted moving average (HEWMA) control chart are discussed and compared with each other. Proposal of these control charts is based on two different estimators, the percentile estimator (PE) and the modified maximum likelihood estimator (MMLE). This study shows that an HEWMA control chart based on PE performs better than PE-based Shewhart and EWMA control charts, as well as MMLE-based Shewhart, EWMA, and HEWMA control charts.     

Crystallization Behaviour and Mechanical Properties of Zr65Cu18Ni9Al8 Bulk Metallic Glass

Designing and synthesis of cost effective bulk metallic glasses (BMGs) has been of considerable interest during the last decade so that they can be made commercially viable. Among these, Zr-based BMGs have been reported extensively due to their attractive properties. An alloy having composition Zr65Cu18Ni9Al8 was designed and synthesized using 2-3 N pure materials by Cu mould casting. The alloy was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and high temperature differential scanning calorimetry (DSC). Thermal parameters like supercooled liquid region ΔTX, reduced glass transition temperature Trg, γand σ parameters were evaluated. Mechanical properties like microhardness, nanohardness, elastic modulus and fracture strength were measured. The alloy showed wide supercooled liquid region of 129±1 K with improved thermal stability. The alloy has considerable fracture strength along with fair amount of ductility.     

Viscosity Behavior of α-Amino Acids in Acetate Salt Solutions at Temperatures (303.15 to 323.15)?K

Viscosities of l-lysine monohydrochloride, l-histidine, and l-arginine in 1 m (mol · kg⁻¹) aqueous solutions of sodium acetate, potassium acetate, and calcium acetate salts has been determined at (303.15, 308.15, 313.15, 318.15, and 323.15) K. The Falkenhagen coefficient, A, and Jones–Dole coefficient, B, relative viscosity, and specific viscosity of the solutions have also been determined using the measured viscosities. The results are interpreted in terms of solute–solute and solute–solvent interactions occurring in the system under investigation and also discussed in terms of the structure-making/breaking ability of the solute in these salt solutions. The structure making/breaking abilities of the solutes in the studied systems are strongly influenced by temperature.     

Development and evaluation of nanosized niosomal dispersion for oral delivery of Ganciclovir

Encapsulation of Ganciclovir in lipophilic vesicular structure may be expected to enhance the oral absorption and prolong the existence of the drug in the systemic circulation. So the purpose of the present study was to improve the oral bioavailability of Ganciclovir by preparing nanosized niosomal dispersion. Niosomes were prepared from Span40, Span60, and Cholesterol in the molar ratio of 1:1, 2:1, 3:1, and 3:2 using reverse evaporation method. The developed niosomal dispersions were characterized for entrapment efficiency, size, shape, in vitro drug release, release kinetic study, and in vivo performance. Optimized formulation (NG8; Span60:Cholesterol 3:2 molar ratio) has shown a significantly high encapsulation of Ganciclovir (89±2.13%) with vesicle size of 144±3.47 nm (polydispersity index [PDI]=0.08). The in vitro release study signifies sustained release profile of niosomal dispersions. Release profile of prepared formulations have shown that more than 85.2±0.015% drug was released in 24 h with zero-order release kinetics. The results obtained also revealed that the types of surfactant and Cholesterol content ratio altered the entrapment efficiency, size, and drug release rate from niosomes. In vivo study on rats reveals five-time increment in bioavailability of Ganciclovir after oral administration of optimized formulation (NG8) as compared with tablet. The effective drug concentration (>0.69 μg/mL in plasma) was also maintained for at least 8 h on administration of the niosomal formulation. In conclusion, niosomes can be proposed as a potential oral delivery system for the effective delivery of Ganciclovir.     

Characterization and photocatalytic activity of boron-doped TiO<Subscript>2</Subscript> thin films prepared by liquid phase deposition technique

Boron doped TiO₂ thin films have been successfully deposited on glass substrate and silicon wafer at 30°C from an aqueous solution of ammonium hexa-fluoro titanate and boron trifluoride by liquid phase deposition technique. The boric acid was used as an F ⁻ scavenger. The resultant films were characterized by XRD, EDAX, UV and microstructures by SEM. The result shows the deposited film to be amorphous which becomes crystalline between 400 and 500°C. The EDAX and XRD data confirm the existence of boron atom in TiO₂ matrix and a small peak corresponding to rutile phase was also found. Boron doped TiO₂ thin films can be used as photocatalyst for the photodegradation of chlorobenzene which is a great environmental hazard. It was found that chlorobenzene undergoes degradation efficiently in presence of boron doped TiO₂ thin films by exposing its aqueous solution to visible light. The photocatalytic activity increases with increase in the concentration of boron.     

From observation to simulation: generating culture-specific behavior for interactive systems

In this article we present a parameterized model for generating multimodal behavior based on cultural heuristics. To this end, a multimodal corpus analysis of human interactions in two cultures serves as the empirical basis for the modeling endeavor. Integrating the results from this empirical study with a well-established theory of cultural dimensions, it becomes feasible to generate culture-specific multimodal behavior in embodied agents by giving evidence for the cultural background of the agent. Two sample applications are presented that make use of the model and are designed to be applied in the area of coaching intercultural communication.     

Effect of microvoid formation on the tensile properties of dual-phase steel

A steel containing 0.32 wt.% C, 0.88 wt.% Mn, 0.99 wt.% Si, 0.9 wt.% Ni, and 0.9 wt.% Cr was intercritically annealed at different temperatures from 775 to 870 °C and quenched in oil to produce dual-phase steel microstructure. Tensile testing of these samples gave a series of strengths and ductilities. The tensile strength increased with the increased annealing temperatures and the martensite percentage increased with a reduction in ductility. Microvoids were formed near the fracture surfaces. The morphology of the microvoids changed with the martensite percentage from decohesion of the martensite particles to the intergranular and transgranular cracks, which defined the ultimate fracture mode of the specimens. The change in the morphology of microvoids may be due to a high percentage of carbon in the steel, which produced stresses in the matrix (ferrite) during phase transformation.