无线局域网采用的补偿码键控调制方式

采用补偿码健控（CCK）可以使IEEE802．11b无线局域网系统实现多速率通信，这是补偿码第一次用于调制。介绍了无线局域网的直接序列扩频（DSSS）的各种模式，着重介绍了无线局域网所采用的CCK调制方式，并对CCK调制的性能进行了理论上的分析。     

Simulation and design methodology for a 50-Gb/s multiplexer/demultiplexer package

A 50 Gb/s package for SiGe BiCMOS 4:1 multiplexer and 1:4 demultiplexer targeting SONET OC-768 serial communication systems is introduced in this work. The package was designed to facilitate bit-error-rate tests and constructed with high-speed coaxial connectors, transmission lines on ceramic substrate, ribbon bonds for chip-to-package interconnects, and a metal composite housing. Numerical simulations were conducted to guide the package design, and both small signal measurements and operational tests were performed thereafter to verify the design and modeling concepts. To keep the model structure under the existing computing capability, the simulation was segmented into three sections - coaxial connector to transmission line, transmission line alone, and transmission line to ribbon bond, and then the results were assembled to predict the performance of the entire package. The package was operated up to 50 Gb/s with low degradation to input digital waveforms and free of error.     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

RS码频域纠错编码在激光对潜通信信道中的实现方法

介绍了信道编码在激光对潜通信系统中的重要作用，介绍了频域编译ＲＳ码的基本方法，并给出了脉冲位置调制信道的ＲＳ码频域编译码的计算机模拟方法和结果。     

录像机无调整式数字伺服

本文介绍了用一个专用微处理器实现新型无调整式数字伺服系统,并在此基础上提出了一种新的磁鼓电机控制方法。     

难熔金属与硬质材料进展─—从第十三届国际普兰西会议看发展动向（Ⅰ）

根据第十三届国际普兰西会议获得的信息，对国际上难熔金属、硬质合金、硬质材料和涂层技术等方面近几年来的研究和发展动态进行了综合评述。最后，提出了几点自己的看法。     

A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

四川盆地中部上三叠统香溪群岩性油气藏圈闭类型及其特征

四川盆地川中地区构造平缓,大型断裂欠发育,已发现的油气藏与背斜关系并不十分密切。研究认为,川中地区香溪群主要发育岩性圈闭,根据圈闭形成主控因素,结合香溪群沉积前的古地貌特征和裂缝发育特点,将川中香溪群岩性圈闭划分为4种类型:①与地层尖灭相关的地层—岩性圈闭;②与沉积—成岩相变密切相关的成岩—岩性圈闭;③与古地貌有关的差异压实作用形成的岩性圈闭;④与断层转化调节相关的裂缝—岩性复合圈闭。其中成岩—岩性圈闭和地层—岩性圈闭,是川中香溪群最重要的、分布最广泛的圈闭类型。     

27keV Ar~+斜入射时的Cu-Au合金溅射实验角分布

用27keV Ar~+分别在垂直和倾斜入射情况下,轰击了Cu-Au(30wt％)合金样品,测量了Cu和Au原子的溅射角分布。角分布是用卢瑟福背散射(RBS)技术分析Al捕获膜上的Cu-Au沉积成分而定量得到的。结果表明:(1)在Ar~+倾斜(θ=40°)入射时,Cu原子择优发射,且程度比垂直入射(θ_r=O°)时增强:(2)倾斜入射时,Cu原子的角分布显示出在接近于样品表面法线方向的发射角范围内(θ<45°),发射机率比垂直入射时减小。