Structure–Property Relationships in Aligned Electrospun Barium Titanate Nanofibers

Barium titanate nanofibers were uniaxially aligned by electrospinning onto a rotating copper wire drum and alignment was maintained during calcination of the fibers. Two methods for maintaining alignment during calcination were tested, by either using carbon tape or a peeling off method to remove the aligned fibers from the mandrel followed by calcination. The carbon tape removal method led to the formation of shorter aligned nanowires while the peeling off method resulted in longer nanofibers. Additionally, the effects of calcination temperature and time on crystal structure were also examined. The degree of tetragonality in the barium titanate nanofibers increased at higher calcination temperatures and times. Piezoelectricity was confirmed in the nanofibers calcined using piezoeresponse force microscopy, yielding a d₃₃ value of 15.5 pm/V. Using the methods presented here, large quantities of aligned piezoelectric barium titanate and other ceramic fibers or wires can be produced to fulfill their demand in novel microelectronics.     

Intrinsic carrier multiplication in layered Bi2O2Se avalanche photodiodes with gain bandwidth product exceeding 1 GHz

Emerging layered semiconductors present multiple advantages for optoelectronic technologies including high carrier mobilities, strong light-matter interactions, and tunable optical absorption and emission. Here, metal-semiconductor-metal avalanche photodiodes (APDs) are fabricated from Bi₂O₂Se crystals, which consist of electrostatically bound [Bi₂O₂]²⁺ and [Se]²⁻ layers. The resulting APDs possess an intrinsic carrier multiplication factor up to 400 at 7 K with a responsivity gain exceeding 3,000 A/W and bandwidth of ~ 400 kHz at a visible wavelength of 515.6 nm, ultimately resulting in a gain bandwidth product exceeding 1 GHz. Due to exceptionally low dark currents, Bi₂O₂Se APDs also yield high detectivities up to 4.6 × 10¹⁴ Jones. A systematic analysis of the photocurrent temperature and bias dependence reveals that the carrier multiplication process in Bi₂O₂Se APDs is consistent with a reverse biased Schottky diode model with a barrier height of ~ 44 meV, in contrast to the charge trapping extrinsic gain mechanism that dominates most layered semiconductor phototransistors. In this manner, layered Bi₂O₂Se APDs provide a unique platform that can be exploited in a diverse range of high-performance photodetector applications.

     

Adsorption of lutein from soybean oil on silicic acid I. Isotherms

Adsorption of lutein from crude soybean oil miscella on dispersed silicic acid resulted in three different Freundlich type isotherms, depending on the amount of adsorbent used. Normally, changing the amount of adsorbent gives a new point on the same isotherm. Further investigation of the lutein adsorption revealed that addition of 1% isopropanol to the hexane solvent and deactivation of the silica acid with water decreased lutein adsorption. Purification of the lutein resulted in increased adsorption, indicating that triglyceride was competing for adsorption sites. The triglyceride competition was confirmed by calculating an adsorption isotherm for triglyceride from crude soybean oil miscella. Use of silicic acid as a column rather than dispersed yielded multiple isotherms for lutein adsorption based on the amount of adsorbent used. Also, lutein adsorption on columns was concentrated at the entrance to the column. Experiments showed that lutein adsorption was not due to partitioning between bound triglyceride and hexane solvent.     

Effect of triacylglycerol structure on absorption and metabolism of isotope-labeled palmitic and linoleic acids by humans

The effect of dietary TAG structure and fatty acid acyl TAG position on palmitic and linoleic acid metabolism was investigated in four middle-aged male subjects. The study design consisted of feeding diets containing 61 g/d of native lard (NL) or randomized lard (RL) for 28 d. Subjects then received an oral dose of either 1,3-tetradeuteriopalmitoyl-2-dideuteriolinoleoyl-rac-glycerol or a mixture of 1,3-dideuteriolinoleoyl-2-tetradeuteriopalmitoyl-rac-glycerol and 1,3-hexadeuteriopalmitoyl-2-tetradeuteriolinoleoyl-rac-glycerol. Methyl esters of plasma lipids isolated from blood samples drawn over a 2-d period were analyzed by GC-MS. Results showed that absorption of the ²H-fatty acids (²H-FA) was not influenced by TAG position. The ²H-FA at the 2-acyl TAG position were 85±4.6% retained after absorption. Substantial migration of ²H-16∶0 (31.2±8.6%) from the sn-2 TAG position to the sn-1,3 position and ²H-18∶2n−6 (52.8±6.4%) from the sn-1,3 position to the sn-2 position of chylomicron TAG occurred after initial absorption and indicates the presence of a previously unrecognized isomerization mechanism. Incorporation and turnover of the ²H-FA in chylomicron TAG, plasma TAG, and plasma cholesterol esters were not influenced by TAG acyl position. Accretion of ²H-16∶0 from the sn-2 TAG position in 1-acylphosphatidylcholine was 1.7 times higher than ²H-16∶0 from the sn-1,3 TAG positions. Acyl TAG position did not influence ²H-18∶2n−6 incorporation in PC. The concentration of ²H-18∶2n−6-derived ²H-20∶4n−6 in plasma PC from subjects fed, the RL diet was 1.5 times higher than for subjects fed the NL diet, and this result suggests that diets containing 16∶0 located at the sn-2 TAG position may inhibit 20∶4n−6 synthesis. The overall conclusion is that selective rearrangement of chylomicron TAG structures diminishes but does not totally eliminate the metabolic and physiological effects of dietary TAG structure.     

Microstructure and multifunctional properties of liquid + polymer bicomponent structural electrolytes: Epoxy gels and porous monoliths

Multifunctional structural batteries and supercapacitors have the potential to improve performance and efficiency in advanced lightweight systems. A critical requirement is a structural electrolyte with superior multifunctional performance. We present here structural electrolytes prepared by the integration of liquid electrolytes with structural epoxy networks. Two distinct approaches were investigated: direct blending of an epoxy resin with a poly(ethylene‐glycol) (PEG)‐ or propylene carbonate (PC)‐based liquid electrolyte followed by in‐situ cure of the resin; and formation of a porous neat epoxy sample followed by backfill with a PC‐based electrolyte. The results show that in situ cure of the electrolytes within the epoxy network does not lead to good multifunctional performance due to a combination of plasticization of the structural network and limited percolation of the liquid network. In contrast, addition of a liquid electrolyte to a porous monolith results in both good stiffness and high ionic conductivity that approach multifunctional goals. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42681.     

矿山酸性含铜废水的处理研究

简述了矿山酸性含铜废水的来源、特点和危害及矿山酸性含铜废水的处理方法。在此基础上,选择离子交换法作为处理工艺,设计了实验室用离子交换处理装置,研究了过滤速度、pH值、原水Cu^2＋浓度等因素对离子交换法处理酸性含铜废水效果的影响,确定了实验室条件下的合理工艺条件。并对某铜矿实际含铜废水进行了处理研究,取得了理想的处理效果,处理后废水可以达标排放。     

Calculation of water droplet impingement using the coupled method of rigid body dynamics and the moving particle semi-implicit method

When a liquid droplet impacts on a solid surface, it recoils to the center of that surface after reaching its maximum spreading diameter. The mechanism of droplet recoiling is not fully understood. To simulate this recoiling of a droplet, a particle method is a good choice because it does not require grids for simulating fluid motions, and can easily handle a large deformation of fluid. In this study, the coupled method of rigid body dynamics and the moving particle semi-implicit (MPS) method (Park and Jeun, 2011) was used to calculate three-dimensional droplet impingement. Also, the previous surface tension model for MPS (Nomura et al., 2001) was revised to get a more realistic surface tension force. A two-step calculation was performed. In the first step, a MPS calculation was performed with particles that were considered to have no mass or volume. In the second step, rigid body dynamics came into the calculation and considered the diameters of particles being slightly lesser than the initial distance between particles. In this study, the calculated results were compared with the measured data (Kim and Chun, 2000) and the recoiling lengths of droplets for the various initial impingement speeds were estimated.     

The fundamentals of barriers to reverse engineering and their implementation into mechanical components

Reverse engineering is a common design strategy in industry. It is a term that has come to encompass a large array of engineering and design activities in the literature; however, in its basic form, reverse engineering is simply the process of extracting information about a product from the product itself. Depending on its use, it may or may not be advantageous to utilize a reverse engineering strategy. As with any rational decision, reverse engineering is only favorable when the benefits from its use outweigh the investment. Therefore, a general understanding of the principles that increase the difficulty or investment required to reverse engineer mechanical products would be helpful for everyone affected by reverse engineering activities. In this paper, we articulate and explore these fundamental principles after reviewing examples from the literature and from our own experience. We then use the principles as a basis for the development of a methodology to build barriers to reverse engineering into new products.     

Effects of pigmentation on siloxane–polyurethane coatings and their performance as fouling-release marine coatings

Siloxane–polyurethane paints were formulated and characterized for coating properties and performance as fouling-release (FR) marine coatings. Paints were formulated at 20 and 30 pigment volume concentrations with titanium dioxide, and aminopropyl-terminated poly(dimethylsiloxane) (APT-PDMS) loadings were varied from 0 to 30% based on binder mass. The coatings were characterized for water contact angle, surface energy (SE), gloss, and pseudobarnacle (PB) adhesion. The assessment of the FR performance compared with polyurethane (PU) and silicone standards through the use of laboratory biological assays was also performed. Biofilm retention and adhesion were conducted with the marine bacterium Cellulophaga lytica, and the microalgae diatom Navicula incerta. Live adult barnacle reattachment using Amphibalanus amphitrite was also performed. The pigmented coatings were found to have properties and FR performance similar to those prepared without pigment. However, a higher loading of PDMS was required, in some cases, to obtain the same properties as coatings prepared without pigment. These coatings rely on a self-stratification mechanism to bring the PDMS to the coating surface. The slight reduction in water contact angle (WCA) and increase in pseudobarnacle release force with pigmentation suggests that pigmentation slowed or interfered with the self-stratification mechanism. However, increasing the PDMS loading is an apparent method for overcoming this issue, allowing for coatings having similar properties as those of clear coatings and FR performance similar to those of silicone standard coatings.