Phase-Tracking Performance of Direct-Detection Optical Receivers

The performance in estimating a Wiener process that modulates the phase of a subcarrier in a direct-detection optical communication system is studied. An approximation is derived for the steady-state probability density of the estimation error. The meansquare estimation error predicted using this density is compared to theoretical lower bounds on the error and to the sample meansquare error obtained by simulation.     

Mechanical wear behavior of nanocrystalline and multilayer diamond coatings on temporomandibular joint implants

We used microwave plasma chemical vapor deposition to deposit nanocrystalline and multilayer (nanocrystalline/microcrystalline/nanocrystalline) diamond thin films on Ti-6AI-4V substrates imitating the condyle and fossa components of the temporomandibular joint. We tested the condyle/fossa pairs for wear in a mandibular movement simulator for an equivalent of two years of clinical use. Analysis of the wear surfaces by optical microscopy, scanning electron microscopy (SEM), and Raman spectroscopy showed that damage in both the films was minimal, no loss of film occurred and the wear performance was superior for the multilayer film. Comparisons with an uncoated condyle/fossa pair showed that the coated temporomandibular joint pairs had improved wear performance.     

Bacterial identification by protein mass mapping combined with an experimentally derived protein mass database

A protein mass mapping approach using mass spectrometry (MS) combined with an experimentally derived protein mass database is presented for rapid and effective identification of bacterial species. A prototype mass database from the protein extracts of nine bacterial species has been created by off-line high-performance liquid chromatography (HPLC) matrix-assisted laser desorption/ionization (MALDI) MS, in which the microbiological parameter of bacterial growth time is considered. A numerical method using a statistical weight factor algorithm is devised for matching the protein masses of an unknown bacterial sample against the database. The sum of these weight factors produces a corresponding summed weight factor score for each bacterial species listed in the database, and the database species producing the highest score represents the identity of the respective unknown bacterium. The applicability and reliability of this protein mass mapping approach has been tested with seven bacterial species in a single-blind study by both direct MALDI MS and HPLC electrospray ionization MS methods, and identification results with 100% accuracy are obtained. Our studies have demonstrated that the protein mass database can be rapidly established and readily adopted with relatively less dependency on experimental factors. Furthermore, it is shown that a number of proteins can be detected using a protein sample amount equivalent to an extract of less than 1000 cells, demonstrating that this protein mass mapping approach can potentially be highly sensitive for rapid bacterial identification.     

High-transfer-rate high-capacity holographic disk data-storage system

We describe the design and implementation of a high-data-rate high-capacity digital holographic storage disk system. Various system design trade-offs that affect density and data-rate performance are described and analyzed. In the demonstration system that we describe, high-density holographic recording is achieved by use of high-resolution short-focal-length optics and correlation shift multiplexing in photopolymer disk media. Holographic channel decoding at a 1-Gbit/s data rate is performed by custom-built electronic hardware. A benchmark sustained optical data-transfer rate of 10 Gbits/s has been successfully demonstrated.     

Controlled modification and direct characterization of multimode-fiber refractive-index profiles

A combination of controlled annealing and characterization by scanning probe microscopy (SPM) is used to demonstrate that the refractive-index proffle of a commercially available silica-based optical fiber can be accurately reconfigured for use as an evanescent field sensor. The process relies on the controlled relocation of the silica glass dopants across the fiber cross section through heat treatment and the accurate measurement of the resulting dopant redistribution with SPM and differential etching techniques. The effect of variable annealing along a length of fiber is to produce a mode transformer to couple light from a laser source into the sensing region of the fiber.     

Mechanistic insights into the development of optical chloride sensors based on the [9]mercuracarborand-3 ionophore

Fluorescent sensing microspheres based on perhaps the most selective and practically useful chloride ionophore known, the recently reported [9]mercuracarborand-3 (MC-3), have been prepared and optimized for physiological measurements. In initial work, this ionophore was shown to yield functional optical sensing films in combination with an electrically neutral chromoionophore, ETH 5418. Unfortunately, however, these optodes suffered from unacceptably high levels of sodium interference under physiological conditions. To better understand the sensing mechanism, optical and potentiometric binding experiments were used to characterize the stoichiometry and the complex formation constants for this ionophore. It was found that the preferred stoichiometry is 1:2, rather than 1:1 as assumed earlier. The 1:2 complex is extremely stable (logbeta2 = 13.4), but a relatively strong 1:1 complex also exists (log K1 = 9.9). These characteristics were used to fabricate chloride optodes that make use of the stepwise ion-ionophore decomplexation equilibrium, by adding a calculated amount of lipophilic anion exchanger to the polymer film. Such optodes showed dramatically reduced sodium interference while maintaining the excellent selectivity of the traditional formulation. The optimized composition also shifted the measuring range to physiological conditions, making them useful for the assessment of chloride in undiluted and 10-fold-diluted blood at pH 7.4. After necessary alterations of the particle preparation procedure and sensor formulation, the new insights were used to fabricate mass-produced optical sensing microspheres with characteristics essentially identical to those of the optode sensing films.     

Ion-pairing ability,chemical stability,and selectivity behavior of halogenated dodecacarborane cation exchangers in neutral carrier-based ion-selective electrodes

Recently, it has been discovered that carba-closo-dodecaborates can be used as cation exchangers in neutral carrier-based ion-selective chemical sensors. Because of their inherent chemical stability and versatile functionalization chemistries, they offer many advantages that may potentially be exploited for ion analyses that require nontraditional sample conditions, including strongly acidic media. In this work, trimethylammonium salts of undecachlorinated (UCC), undecabrominated (UBC), hexabrominated (HBC), and undecaiodinated (UIC) carborane anions were prepared and evaluated for their potential use in solvent polymeric membrane-based sensors. Computational methods including Natural population analysis and electrostatic mapping were used to predict the ion-exchanging ability of each lipophilic anion. In addition, the sandwich membrane technique was used to evaluate the ion-pairing ability of each carborane anion in situ (i.e., within bis(2-ethylhexyl) sebacate (DOS)- and 2-nitrophenyl octyl ether (o-NPOE)-plasticized ISE membranes). The results of the computational and potentiometric studies found that binding affinity of the anions followed the generalized trend HBC > UCC > UBC > UIC. PVC-DOS bulk optode thin films containing the chromoionophore ETH 5315 and a respective anion were used to determine the chemical stability/lipophilicity of the carboranes and tetrakis[3,5-bis(trifluoromethyl)phenyl] borate (TFPB) in acidic media (0.2 M HOAc) under flowing conditions. The studies found that in terms of stability/lipophilicity UIC > UBC > TFPB approximately UCC > HBC. Electrodes containing a Pb(2+)-selective ionophore, tert-butylcalix[4]arene-tetrakis(N,N-dimethylthioacetamide)(lead IV), were used to evaluate the functionality of each cation exchanger. An evaluation of response characteristics such as slope and selectivity found that UIC and UBC were quite comparable to the behavior of TFPB. Interestingly, both UIC and UBC showed a marked selectivity improvement over cadmium, with log K(pot)(pb),(Cd) values of -7.19 and -7.29, respectively, with TFPB giving a value of -5.89. Demonstrating excellent stability and suitable electrostatic properties, the carboranes, UIC in particular, are a very promising alternative to the tetraphenylborates and should find widespread application in the field of chemical sensors.     

Cavity ring-down spectroscopy as a detector for liquid chromatography

We have demonstrated the use of cavity ring-down spectroscopy (CRDS) as a detector for high performance liquid chromatography (HPLC). For this use, we have designed and implemented a Brewster's angle flow cell such that cavity ring-down spectroscopy can be performed on microliter volumes of liquids. The system exhibits a linear dynamic range of 3 orders of magnitude (30 nM to 30 microM quinalizarin at 470 nm) for static measurements and 2 orders of magnitude (0.5 microM to 50 microM) for HPLC measurements. For the static measurements, the baseline noise is 2.8 x 10(-6) AU rms and 1.0 x 10(-5) AU peak-to-peak, and for the HPLC separations, it is 3.2 x 10(-6) AU rms and 1.3 x 10(-5) AU peak-to-peak. The baseline noise is determined after the data are smoothed by an 11-point boxcar average. The peak areas detected from HPLC separations are reproducible to within 2-3%. The HPLC mass detection limit for a molecule with epsilon = 9 x 10(3) M(-1) cm(-1) in a 300-microm path length cell (illuminated volume, 0.5 microL) is reported as 2.5 x 10(-8) g/mL. These results were obtained using a simple pulsed CRDS system and are comparable to, if not better than, a high-quality commercial UV-vis absorption detector for the same path length.     

The Commercialization of Information Infrastructure as Technological Mediation: The Internet Access Market

The study interprets the geographic diffusion of Internet Service Providers (ISPs) and the expansion of ISPs product lines in terms of the market for technological mediation. A firm involved in technology mediation takes advantage of gaps between general technological opportunities and particular user needs in specific places at particular times. If the economic opportunities are fleeting, then so too is the business. If the economic opportunities are renewed frequently, then the business can grow and adapt to take advantage of them. The concept of technological mediation helps us understand business behavior accompanying the commercialization of internet access technology.