Molecular weight distribution of polyethylene catalyzed by Ziegler–Natta catalyst supported on MgCl2 doped with AlCl3

Ti‐based Ziegler–Natta catalysts supported on MgCl₂ doped with AlCl₃ were prepared by the reaction of MgCl₂/AlCl₃–ethanol adduct with TiCl₄. No AlCl₃ crystallites were found in the AlCl₃‐doped catalysts by WAXD analysis, suggesting that AlCl₃/MgCl₂ solid solution was formed. The effect of doping on the catalyst performance in ethylene polymerization was investigated. The results showed that the catalysts based on AlCl₃‐doped MgCl₂ support exhibited a slightly higher activity than did the MgCl₂‐supported catalyst and the molecular weight distribution (MWD) of polyethylene (PE) markedly increased (from 10.8 to 47.9) with the increase of AlCl₃ content in catalysts. The changes in catalyst's active center distribution were studied based on nonlinear fitting of the polymer GPC curves by multiple Flory functions. It was found that increase of types of active centers by introducing AlCl₃ into the support should be responsible for the broadening of MWD of PE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1768–1772, 2006     

基于遗传算法优化的OCSVM双轮廓模型异常检测算法

针对Modbus工业总线协议的特殊性及工控数据样本的不均衡性,利用单类支持向量机（OCSVM）分别构建正常OCSVM模型和异常OCSVM模型,即双轮廓模态来模拟系统通信的正常模式和异常模式,从而实现工控系统异常检测。同时将遗传算法优化自变量降维应用于工控网络入侵检测场景,实现对输入自变量的降维压缩处理,防止OCSVM模型出现过拟合现象及分类准确率低的问题,提高异常检测的精度,缩减建模时间。通过仿真验证了该算法对工控网络异常检测的有效性。     

Physical properties of polycaproamide/cationic dyeable poly(ethylene terephthalate) polyblended fibers

Polycaproamide (PCA) and cationic dyeable poly(ethylene terephthalate) (CDP) polymers were blended mechanically (in ratios of 75/25, 50/50, and 25/75) in a melt twin‐screw extruder to prepare three PCA/CDP polyblended materials. The blends of PCA and CDP were spun into fibers. The molar ratio of dimethyl 5‐sulfoisophthalate sodium salt for CDP was 2%. This study investigated the physical properties of PCA/CDP polyblended fibers with nuclear magnetic resonance, gel permeation chromatography, gas chromatography, potentiometer, differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), extension stress–strain measurements, density gradient analysis, and rheometry. The experimental results of DSC proved that PCA and CDP formed an immiscible system. In an SEM image of a 50/50 PCA/CDP blend, the morphological aggregation of a larger size, from 3 to 5 μm in diameter, was observed. The rheological behavior of the PCA/CDP polyblended materials exhibited negative‐deviation blends, and the 50/50 blend of the PCA/CDP polyblended fibers showed a minimum tenacity value. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1710–1715, 2004     

Synthesis and characterization of new functional poly(urethane‐imide) crosslinked networks

To synthesize new functional poly(urethane‐imide) crosslinked networks, soluble polyimide from 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride, 4,4′‐oxydianiline, and maleic anhydride and polyurethane prepolymer from polycaprolactone diol, tolylene 2,4‐diisocyanate and hydroxyl ethyl acrylate were prepared. Poly(urethane‐imide) thin films were finally prepared by the reaction between maleimide end‐capped soluble polyimide (PI) and acrylate end‐capped polyurethane (PU). The effect of polyurethane content on dielectric constant, residual stress, morphology, thermal property, and mechanical property was studied by FTIR, prism coupler, Thin Film Stress Analyzer (TFSA), XRD, TGA, DMTA, and Nano‐indentation. Dielectric constant of poly(urethane‐imide) thin films (2.39–2.45) was lower than that of pure polyimide (2.46). Especially, poly(urethane‐imide) thin films with 50% of PU showed lower dielectric constant than other poly(urethane‐imide) thin films did. Lower residual stress and slope in cooling curve were achieved in higher PU content. Compared to typical polyurethane, poly(urethane‐imide) thin films exhibited better thermal stability due to the presence of the imide groups. The glass transition temperature, modulus, and hardness decreased with increase in the flexible PU content even though elongation and thermal expansion coefficient increased. Finally, poly(urethane‐imide) thin films with low residual stress and dielectric constant, which are strongly affected by the morphological structure, chain mobility, and modulus, can be suggested to apply for electronic devices by variation of PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 113–123, 2006     

Graft copolymerization of styrene and acrylonitrile onto EPDM

Acrylonitrile–EPDM–styrene (AES) graft copolymers were synthesized by solution graft polymerization of styrene (St) and acrylonitrile (AN) onto EPDM in an n‐hexane/benzene solvent with benzoyl peroxide (BPO) as an initiator. The structure changes were studied by an FTIR spectrophotometer. The grafting parameters were calculated gravimetrically. The influence of the polymerization conditions, such as the reaction time, concentration of the initiator, EPDM content, and weight ratio of St/AN, on the structure of the products was investigated. It was found that a proper initiator concentration and EPDM content will give a high grafting ratio of the AES resin. The thermal property of the copolymer was studied using programmed thermogravimetric analysis (TGA). The results showed that the copolymer has a better heat‐resistant property than that of ABS, especially for the initial decomposition temperature (T_in) and the maximum weight loss rate temperature (T_max). Also, the mechanism of the graft reaction was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 428–432, 2002     

Preparation and characterization of calcium carbonate/low‐density‐polyethylene nanocomposites

Calcium carbonate/low‐density‐polyethylene (LDPE) nanocomposites have been prepared by melting blend with twin‐screw extruder. The mechanical properties of composites and the dispersion of the nanoparticles were studied. The reinforcement mechanism was discussed. The results show that not only the tensile property but also the flexural modulus of the system have been evidently increased by the addition of calcium carbonate. The calcium carbonate particles have been dispersed in the matrix in the nanometer scale. The reinforcement mechanism of the calcium carbonate lies on that the calcium carbonate particles, acting as hetero‐nuclei, can induce higher crystallinity at the matrix‐particle interface compared to regions away from the interface. Consequently, in the process of the tensile test, the nanocomposites have better tensile yield strength. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and characterization of eugenol‐grafted chitosan hydrogels and their antioxidant activities

The hydrogels composed of chitosan and eugenol were prepared to enhance and sustain antioxidant activities. The vinyl groups of eugenol monomer were directly grafted on the amino groups of chitosan, using ceric ammonium nitrate. The graft of eugenol onto chitosan was confirmed by using Fourier‐transform infrared and proton nuclear magnetic resonance spectroscopies. Results from the swelling behavior, thermal stability, and wide‐angle X‐ray diffraction revealed that the equilibrium water content decreased with increase of graft yields, because of the hydrophobicity of eugenol, although the introduction of eugenol as a side chain disturbed the ordered arrangement of chitosan's crystalline structure. The eugenol‐grafted chitosan hydrogels showed lower pH sensitivity in comparison with chitosan alone, because the amino groups, which were pH sensitive, of chitosan were grafted with eugenol. The scavenging activity of the tested hydrogels increased with graft yield of eugenol, because phenolic groups in the eugenol could play a major role as potent free‐radical terminators, in the results of improved antioxidant activity in eugenol‐grafted chitosan hydrogel in comparison with chitosan alone. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3500–3506, 2006     

Syndiotactic Polystyrene/Organoclay Nanocomposites: Synthesis via In Situ Coordination‐Insertion Polymerization and Preliminary Characterization

Summary: Syndiotactic polystyrene (sPS)/organophilic clay nanocomposites were obtained by in situ coordination‐insertion polymerization of styrene. Two cationic surfactants (alkylammonium and alkylphosphonium) were used for the intercalation of montmorillonite (MMT). For each organically modified clay, three protocols were performed using an MAO‐activated hemi‐metallocene catalyst, in order to compare the influence of experimental conditions on the composite microstructure and on its thermal stability. The microstructures of nanocomposites were investigated by wide angle X‐ray scattering and DSC. Partially exfoliated or intercalated materials were obtained in all cases and a decrease of crystallinity is observed. Thermal properties were also studied by DSC and thermogravimetric analysis. The presence of clay does not have a strong influence on the sPS thermal transitions but the thermal decomposition process of the material was slowed down in the presence of few organoclay percents, particularly in the degradation beginning. The influence of these two organically modified clays on the thermal stability of the material is discussed.

Gel and suspension formed from the combination of cloisite with toluene (left) and styrene (right), respectively.     

Preparation of pH‐sensitive poly(vinyl alcohol‐g‐methacrylic acid) and poly(vinyl alcohol‐g‐acrylic acid) hydrogels by gamma ray irradiation and their insulin release behavior

A series of pH‐responsive hydrogels were studied as potential drug carriers for the protection of insulin from the acidic environment of the stomach before releasing in the small intestine. Hydrogels based on poly(vinyl alcohol) networks grafted with acrylic acid or methacrylic acid were prepared by a two‐step process. Poly(vinyl alcohol) hydrogels were prepared by gamma ray irradiation (50 kGy) and then followed by grafting either acrylic acid or methacrylic acid onto these poly(vinyl alcohol) hydrogels with subsequent irradiation (5–20 kGy). These graft hydrogels showed pH‐sensitive swelling behavior and were used as carriers for the controlled release of insulin. The in vitro release of insulin was observed for the insulin‐loaded hydrogels in a simulated intestinal fluid (pH 6.8) but not in a simulated gastric fluid (pH 1.2). The release behavior of insulin in vivo in a rat model confirmed the effectiveness of the oral delivery of insulin to control the level of glucose. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 636–643, 2004     

无氟防龋体系浅析

牙膏无氟防龋体系应用的防龋材料主要有纳米级羟基磷灰石（HAP）、免疫球蛋白（IgY）和中药如两面针、厚朴、茶多酚和蜂胶等.纳米级羟基磷灰石可以使脱矿的牙釉质再矿化,提高牙釉质抗龋能力;免疫球蛋白对变形链球菌和牙菌斑的形成有较好的抑制作用.检测试验或临床结果表明,两面针、厚朴、茶多酚和蜂胶等中药对致龋菌和牙菌斑的形成的抑制效果也比较好,这些都可以组成效果比较好的无氟防龋体系.