Fabrication of Ormocer Containing Eu3＋ Ion and Their Optical Spectra

Eu3 ions were incorporated in sol and gel by a sol-gel processing using 3-glycidoxypropyltrimethoxysilane(CH2OCHCH2O(CH2)3Si(OCH3)3, GPTMS) and ethyl silicate (TEOS) as precursors. The basic chemical-physical properties such as DTA curve, FF-IR spectra and specific surface area were recorded. The characteristics of their optical spectra were measured and investigated. The results indicate that the emission intensity of Eu3 ion in ormocer is much higher and the global line width is wider than those in SiO2 gel. The relationship between the composition and structure of gels and the fluorescence intensity and width were discussed. The obtained ormocer shows good mechanical strength, which can be cut and polished in machine without broken.     

高含沙量岛屿海域工程建设的潮动力沉积影响研究

以高含沙量岛屿海域洋山海区为例,采用平面二维有限元数学模型模拟了该区域的流场。计算了修筑防波堤后海域底床的泥沙冲淤变化。结果表明,影响仅限于工程附近。     

一种基于循环小波累积量的谐波恢复方法

循环统计量是乘性和加性噪声中谐波恢复问题的主要分析工具之一。本文在其基础上提出了一种新的理论与方法——基于循环小波累积量的谐波恢复方法。首先,提出了循环小波累积量的定义。然后,建立了基于一阶、二阶、三阶循环小波累积量的谐波分量的频率和相位的估计方法。在此基础上,采用了一种可调参数的小波,通过调节其参数来改善传统方法中频率分辨率低的缺陷。最后给出了模拟实验结果。     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

传爆管用聚奥99炸药研究

介绍了具有高煤轰感度和耐热特性的聚奥99炸药的配方、制备工艺、性能以及装入传爆管后产品的性能和应用状况。     

SL1型翻斗式遥测雨量计的维修和养护

仪器缺少维修及养护直接影响测报工作的完成，以 Ｓ Ｌ１ 型翻斗式遥测雨量计为例，从仪器的结构原理出发，介绍仪器的维修和养护方法，并简单论述仪器维护的重要性，提出一些搞好仪器维护的建议。     

SiC颗粒尺寸及含量对SiCp／2024Al复合材料性能的影响

本文对粉末冶金法制备的SiCp/2024Al复合材料的性能进行了研究。随SiC颗粒尺寸的增大,复合材料的强度降低,而塑性和磨损抗力则增加。SiC颗粒尺寸对复合材料的物理性能没有什么影响。增加SiC颗粒含量,复合材料的强度、模量均增大,磨损抗力亦明显增加,而塑性和热膨胀系数则降低。     

On the algebraic formulation of certain geometry statements and mechanical geometry theorem proving

In this paper we analyze the algebraic formulations of certain geometry statements appearing in recent literature related to mechanical geometry theorem proving and give several examples to show that one of these formulations can cause serious problems. We clarify a formulation which is essentially due to W. T. Wu and, in our opinion, is the most satisfactory.This author was supported by NSF Grants DCR-8503498 and CCR-8702108.     

防水粉憎水膜形成机理及稳定性的研究

通过对防水粉憎水膜形成途径的探索，提出了憎水膜形成过程的基本假设，利用微观测试方法证实了憎水膜层的存在．试验并研究了防水粉长期稳定性的诸多问题。     

TiO_2-聚乙烯复合膜的制备及红外光谱对其膜层结构的表征

开发了以Ｔｉ４＋为桥联剂制备无机－有机复合膜的新方法以自制的硅藻土多孔陶瓷为基膜（支撑体），使用浸涂法－热致相转化法相结合制备了ＴｉＯ２－聚乙烯复合膜，并用红外光谱表征了复合膜层与层之间的结合方式和强度，支撑体中的ＳｉＯ２通过Ｔｉ４＋与聚乙烯的分子之间形成了新的化合物型膜层