Thermal and mechanical properties of the polymers synthesized by the sequential polymerization of propylene and 1‐hexadecene

The block copolymer of poly(1‐hexadecene) (PHD) and polypropylene (PP) was effectively synthesized by the sequential polymerization of propylene and 1‐hexadecene by using highly isospecific TiCl₃/Cp₂Ti(CH₃)₂ (Cp = cyclopentadienyl). The block copolymers had two separate melting temperatures of constituent blocks. The modulus of PHD–PP block copolymer was enhanced as the content of sequentially polymerized PP block was increased. The elongation at break showed positive deviation at the intermediate compositions from the simple additive values of constituent homopolymers. Shape memory effect which utilizes the crystalline PHD block as a reversible phase and the crystalline PP block as a fixed structure was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1709–1715, 2002; DOI 10.1002/app.10551     

32位和8位单片机的无线传感器网络系统

采用STM32F10X系列的芯片为主芯片、SH79F32为辅芯片,温度传感器DS18B20做采集工具,PTR8000无线模块做通信工具,实现无线传感器网络功能。通过Altium Designer Release 10进行原理图设计及PCB板的绘制,并制作电路板、焊接电路板,之后利用Keil软件设计程序,实现不同单片机之间的无线传感器网络通信,并完成了无线通信平台的设计与制作。     

网络安全评估方法分析

近年来,网络攻击事件时有发生,给社会和企业带来巨大威胁和损失,对于网络安全评估方法的研究成为了热点,文中介绍了网络安全评估方法的研究现状,分析了网络安全评估相关技术,进而探析了网络安全评估方法。     

不同助烧结剂及造孔剂对SiC多孔陶瓷的影响

采用真空烧结方法制备了SiC多孔陶瓷，研究了不同助烧结剂Al2O3-Y2O3、Si以及不同造孔剂丙烯酰胺聚合物、羧甲基纤维素（CMC）对SiC多孔陶瓷形貌和气孔率的影响。结果表明：与Si相比较，Al2O3-Y2O3更有利于促进SiC的烧结；以Al2O3-Y2O3为助烧结剂的试样比以Si为助烧结剂的试样具有较高的气孔率。     

Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part III. The importance of the interactions between volatiles and char at high temperature

A novel two-stage fluidised-bed/fixed-bed reactor was designed to investigate the effects of volatile-char interactions on the volatilisation of alkali and alkaline earth metallic (AAEM) species during the pyrolysis of Victorian brown coal at 900 °C. With the two-stage reactor configuration, the AAEM-free volatiles generated from the pyrolysis of the H-form coal in the fluidised bed came into direct contact with the char from NaCl-loaded or Na-form coals in the fixed bed. The results indicated that the interactions between the volatiles, especially free radicals in the volatiles, and the char particles enhanced the volatilisation of Na from the char drastically. However, such radical-char interactions resulted in little volatilisation of Mg and Ca, indicating the importance of valence of the AAEM species. The degree of the volatile-char interactions was also related to the ageing of the char and the chemical form of AAEM species in the coal substrate. The volatiles interacted more strongly with the nascent char than the aged char, indicating that the AAEM species existed in the aged char in more stable forms than in the nascent char.     

信息不对称下的建设项目组织界面管理

建设项目的各参与方隶属于不同的组织体系,界面双方（多方）就会存在极度的信息不对称。以业主和施工承包商为例,分析了二者之间的信息不对称所造成的影响。最后,通过对信息不对称的产生原因分析,从组织层面上提出了一些可能的解决措施,包括：设计合理的契约、应用新的承发包模式、建立统一编码的界面管理信息系统、合理设计组织内部各职能部门界面。     

Numerical simulation on bolted rock joint shearing performance

A Double Shear Model(DSM)was used in a numerical simulation on bolted rock joint shearing performance.An entire bolt deformed as the letter"U"under a shear load between two joints.Near the bolt-joint intersection,the bolt partly deformed as the letter"Z".There were two critical points along the bolt: one was at the bolt-joint intersection with zero bending moment and the other at the maximum bending moment(plastic hinge)with zero shear stress.The blocks on two sides slid along the bolt as it deformed.A separation area was found between the two joint contact surfaces of the middle rock block and sided block.This area of separation was related to bolt diameter and external forces.We assume that this area is related to the work of external forces.Further research is needed.     

挠性转子磁力轴承系统LQ最优控制研究

在高温气冷堆氦气透平发电系统（HTR—IOGT）的相似性模拟实验装置AMB—PⅡ上,开展针对磁力轴承支承下挠性转子系统的优化控制研究。采用离散质量的集总参数法建立了相应转子动力学模型,通过适当模态截断简化获得了转子系统的状态方程。研究了LQ最优控制方法,分析了权重参数的选择对控制器的影响。仿真实验表明,输出反馈LQ结合相位补偿的控制器,具有物理意义清晰、系统结构简单和参数易于调节等优点。在AMB—PⅡ实验台架上不仅实现了转子的稳定悬浮,而且能够有效地抑制转子的高阶挠性模态振动,使转子顺利通过了二阶挠性临界转速,最高达到450Hz。该方法的研究为今后高温气冷堆氦气透平工程的磁力轴承实际应用提供了良好的设计参考。     

机械力化学改性硅灰石/聚丙烯性能的研究

利用气流磨对硅灰石进行机械力化学改性，并用IR分析对改性效果进行了预评价；对比了用改性前后的硅灰石填充聚丙烯(PP)的性能。结果表明：改性后硅灰石分别为由亲水疏油性变为亲油疏水性；硬脂酸质量分数为1．5％时，改性硅灰石／PP复合材料的拉伸强度和冲击强度最好。     

破乳+Fenton试剂法处理高浓度废乳化液的研究

采用破乳-Fenton试剂法对机械厂磨床车间废乳化液进行处理(原水CODcr=290000mg／L，BOD5=28000mg／L)。结果表明：使用合适的破乳药剂，破乳后废水的CODcr去除率达到97．8％；之后投加适量的Fenton试剂进行氧化处理，最终出水CODcr为684mg／L；BOD5／COD由0．094增至0．47，可生化性大大提高。