Resource and energy management of synfuels production with hydrogen and oxygen requirements from electrolysis

The Resource and Energy Management System (REM) is an integrated self-sufficient system for the efficient and clean recovery of synthetic crudes at high yields from a variety of heavy hydrocarbon deposits. The system integrates the following: heavy oil/tar sand bitumen/shale oil/coal recovery; upgrading by “hydrogen addition”; residual oil/coal gasification; and combined cycle electricity generation for water electrolysis.Recovered heavy hydrocarbons are upgraded by “hydrogen addition”. Hydrogen is available, in the REM system, from electrolysis, from gasifying the waste carbonaceous residues from upgrading and from gasifying coal. Gasification is efficiently carried out with oxygen, available from electrolysis. Gasifier synthesis gases are also used in a combined-cycle power system to generate power. Power, produced economically by this means, is used to electrolyse water which is the source of hydrogen for upgrading and of oxygen for gasification.Favourable technical and economic circumstances now prevail for the commercialization of large-scale electrolytic units in the synfuels industry according to a technical and economic analysis.The Government of Canada and the Province of Alberta through the Alberta Oil Sands Technology and Research Authority and Norcen Energy Resources Limited are jointly funding a feasibility study of the REM system, as applied to small-scale hydrogen addition synfuels plants on the Canadian tar sands and heavy oil deposits. Canadian Patent 1065780 and U.S. Patent 4 160 479 have been issued with patents pending in Venezuela and Mexico covering the REM system.     

Dissolved air flotation in hot water

The effects of increased water temperature on dissolved air flotation have been measured. At temperatures up to 80°C the efficiency of air dissolution by spraying water over proprietory packing, bubble size distributions and the air-solids ratios required for iron floc flotation were found to be close to the values commonly found for those obtained at ambient temperature. Bubble rise rates at 80°C were three times faster than at 20°C and the onset of severe bubble coalescence at 80°C occurred at air dissolution pressures above 350 kPa.     

D.C. measurement of the space charge capacitance and impurity profile beneath the gate of an MOST

An analysis of the MOS Transistor with bias between the source and substrate has shown that when the surface is weakly inverted, the silicon space charge capacitance over a wide range of temperature and bias can be obtained from the change in gate voltage required to maintain a constant channel current. The substrate impurity profile beneath the gate oxide can then be calculated from capacitance-bias measurements.     

Alternate and new brominated flame retardants detected in U.S. house dust

Due to the voluntary withdrawals and/or bans on the use of two polybrominated diphenyl ether (PBDE) commercial mixtures, an increasing number of alternate flame retardant chemicals are being introduced in commercial applications. To determine if these alternate BFRs are present in indoor environments, we analyzed dust samples collected from 19 homes in the greater Boston, MA area during 2006. Using pure and commercial standards we quantified the following brominated flame retardant chemicals using GC/ECNI-MS methods: hexabromocyclododecane (sigma HBCD), bis(2,4,6,-tribromphenoxy)ethane (BTBPE), decabromodiphenyl ethane (DBDPE), and the brominated components found in Firemaster 550 (FM 550): 2-ethylhexyl 2,3,4,5-tetrabromobenzoate (TBB) and (2-ethylhexyl)tetrabromophthalate (TBPH), the latter compound being a brominated analogue of di(2-ethylhexyl)phthalate (DEHP). The concentrations of all compounds were log-normally distributed and the largest range in concentrations was observed for HBCD (sum of all isomers), with concentrations ranging from <4.5 ng/g to a maximum of 130,200 ng/g with a median value of 230 ng/g. BTBPE ranged from 1.6 to 789 ng/g with a median value of 30 ng/g and DBDPE ranged from <10.0 to 11,070 ng/g with a median value of 201 ng/g. Of the FM 550 components, TBB ranged from <6.6 to 15,030 ng/g with a median value of 133 ng/g; whereas TBPH ranged from 1.5 to 10,630 ng/g with a median value of 142 ng/g. Furthermore, the ratio of TBB/TBPH present in the dust samples ranged from 0.05 to 50 (average 4.4), varying considerably from the ratio observed in the FM 550 commercial mixture (4:1 by mass), suggesting different sources with different chemical compositions, and/or differential fate and transport within the home. Analysis of paired dust samples collected from different rooms in the same home suggests HBCD, TBB, and TBPH are higher in dust from the main living area compared to dust collected in bedrooms; however, BTBPE and DBDPE levels were comparable between rooms. This study highlights the fact that numerous types of brominated flame retardants are present in indoor environments, raising questions about exposure to mixtures of these contaminants.     

Environmentally-relevant forms of the prion protein

Scrapie and chronic wasting disease (CWD) are prion diseases of particular environmental concern as they are horizontally transmissible and can remain infectious after years in the environment. Recent evidence suggests that the N-terminus of PrPSC, the infectious conformation of the prion protein, plays an important role in the mechanism of sorption to soil particles. We hypothesize that, in a prion-infected animal carcass, a portion of the N-terminus of PrPSc could be cleaved by proteinases in the brain at ordinary temperatures. Hamster (HY transmissible mink encephalopathy-infected), transgenic mice (CWD-infected), and elk (CWD-infected) brain homogenates were incubated at 22 and 37 degrees C for up to 1 month and then analyzed by Western blot using N-terminal and middle region monoclonal anti-PrP antibodies. For all three systems, there was a very faint or undetectable N-terminal PrP signal after 35 days at both temperatures, which indicates that full-length PrPSc might be rare in the brain matter of animal carcasses. Future studies on prion-soil interactions should therefore consider N-terminal-degraded PrPSc in addition to the full-length form. Both mouse and elk CWD PrPSc demonstrated greater resistance to degradation than HY TME PrPSc. This indicates that the transgenic mouse-CWD model is a good surrogate for natural CWD prions, but that other rodent prion models might not accurately represent CWD prion fate in the environment.     

Modelling the propagation of social response during a disease outbreak

Epidemic trajectories and associated social responses vary widely between populations, with severe reactions sometimes observed. When confronted with fatal or novel pathogens, people exhibit a variety of behaviours from anxiety to hoarding of medical supplies, overwhelming medical infrastructure and rioting. We developed a coupled network approach to understanding and predicting social response. We couple the disease spread and panic spread processes and model them through local interactions between agents. The social contagion process depends on the prevalence of the disease, its perceived risk and a global media signal. We verify the model by analysing the spread of disease and social response during the 2009 H1N1 outbreak in Mexico City and 2003 severe acute respiratory syndrome and 2009 H1N1 outbreaks in Hong Kong, accurately predicting population-level behaviour. This kind of empirically validated model is critical to exploring strategies for public health intervention, increasing our ability to anticipate the response to infectious disease outbreaks.     

Fiber Reinforced Layered Dielectric Nanocomposite

Polymer dielectrics find applications in modern electronic and electrical technologies due to their low density, durability, high dielectric breakdown strength, and design flexibility. However, they are not reliable at high temperatures due to their low mechanical integrity and thermal stability. Herein, a self‐assembled dielectric nanocomposite is reported, which integrates 1D polyaramid nanofibers and 2D boron nitride nanosheets through a vacuum‐assisted layer‐by‐layer infiltration process. The resulting nanocomposite exhibits hierarchical stacking between the 2D nanosheets and 1D nanofibers. Specifically, the 2D nanosheets provide a thermally conductive network while the 1D nanofibers provide mechanical flexibility and robustness through entangled nanofiber–nanosheet morphologies. Experiments and density functional theory show that the nanocomposites through thickness heat transfer processes are nearly identical to that of boron nitride due to synergistic stacking of polyaramid units onto boron nitride nanosheets through van der Waals interactions. The nanocomposite sheets outperform conventional dielectric polymers in terms of mechanical properties (about 4–20‐fold increase of stiffness), light weight (density ≈1.01 g cm^?3), dielectric stability over a broad range of temperature (25–200 °C) and frequencies (10³–10⁶ Hz), good dielectric breakdown strength (≈292 MV m^?1), and excellent thermal management capability (about 5–24 times higher thermal conductivity) such as fast heat dissipation.     

Few‐Layer GeAs Field‐Effect Transistors and Infrared Photodetectors

The family of 2D semiconductors (2DSCs) has grown rapidly since the first isolation of graphene. The emergence of each 2DSC material brings considerable excitement for its unique electrical, optical, and mechanical properties, which are often highly distinct from their 3D counterparts. To date, studies of 2DSC are majorly focused on group IV (e.g., graphene, silicene), group V (e.g., phosphorene), or group VIB compounds (transition metal dichalcogenides, TMD), and have inspired considerable effort in searching for novel 2DSCs. Here, the first electrical characterization of group IV–V compounds is presented by investigating few‐layer GeAs field‐effect transistors. With back‐gate device geometry, p‐type behaviors are observed at room temperature. Importantly, the hole carrier mobility is found to approach 100 cm² V^?1 s^?1 with ON–OFF ratio over 10⁵, comparable well with state‐of‐the‐art TMD devices. With the unique crystal structure the few‐layer GeAs show highly anisotropic optical and electronic properties (anisotropic mobility ratio of 4.8). Furthermore, GeAs based transistor shows prominent and rapid photoresponse to 1.6 µm radiation with a photoresponsivity of 6 A W^?1 and a rise and fall time of ≈3 ms. This study of group IV–V 2DSC materials greatly expands the 2D family, and can enable new opportunities in functional electronics and optoelectronics based on 2DSCs.