Effect of dual-scale microstructure on the toughness of laminar zirconia composites

Numerical study by the finite element method (FEM) is performed to investigate the effect of dual-scale microstructure on the toughness of laminar zirconia composite. The computation is based on the micromechanics constitutive model of polycrystal transformation plasticity developed by Sun et al. [10] where both transformation induced shear and softening effects during autocatalytic transformation are taken into account. The numerical simulation presented in this paper successfully reproduced the experimentally observed two effects of the dual-scale microstructure on the toughness of laminar zirconia composite, i.e., the truncation of the elongated transformation frontal zone that forms in single phase Ce-ZrO₂ and the propagation of the transformation zone along the layers normal to the crack plane. Quantitative analysis on the role of microstructure in transformation toughening of laminar zirconia composite is first carried out in the present work which will provide a starting point for the microstructural design of this novel advanced composite in the future.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids. 4–7 July 1994 in Xi'an, China.     

实验应变／应力模态分析若干问题的进展评述

本文评述了实验应变／应力模态分析进展的若干基本问题。主要是：应变响应与位移响应的关系；应变频响函数矩阵的特点及其测量方法；应变模态的加权正交性及其识别方法；以及其他问题。     

铈和磷对中碳锰钢低温回火脆性的影响

本文采用冲击试验和断口扫描电镜，俄歇谱分析等方法，研究了铈对不同磷含量的中碳锰钢低温回火脆性的影响。结果表明，磷在奥氏体晶界偏聚是导致含磷锰钢产生低温回火脆性的原因，而铈的加入，可减少磷的偏聚程度，增加回火马氏体的冲击值，从而降低中碳锰钢的回火脆性。     

新型迷宫式气锚及其应用

新型迷宫式气锚将重力分离原理和离心分离原理有机地结合在一起，其基本型气锚主要由上、下两级组成。上级为离心式螺旋气锚，下级为重力分离式和离心分离式综合气锚，可使油气流经同一长度锚筒时，达到双倍的分离效果。可根据油井气量的大小（气液比值）组成任意级数，实现油气的高效分离。还可对低产能井、沉没度易出现负值的油井进行油气分离，维持油井一定时间的生产。现场28口井的应用表明，新型迷宫式气锚油气分离效果理想，能有效地提高泵效，平均泵效由原来的28．9％提高到43．8％。     

快速烧结法制备连续碳化硅纤维

通过熔融纺丝，不熔化处理制得连续聚碳硅烷（ＰＣＳ）不熔化纤维，采用快速烧结方法制备出性能较好的连续ＳｉＣ纤维。探讨了气封条件的选择，以及烧结速度对ＳｉＣ纤维的组成，结构及性能的影响。结果表明，快速烧结条件下，可以实现向纤维上施加张力以及纤维的无机化转变，烧结速度加快会降低纤维的Ｃ／Ｓｉ（原子比），同时有利于提高纤维的抗拉强度和热稳定性。     

波导短程透镜球差特性分析及其焦距精确测量方法的研究

本文研究短程透镜的焦点位于端面外的球差特性。对焦点位于波导外部（包括端面）的情况给出了一种精确测量焦距新方法，采用这种方法简单易行，测量精度取决于读数显微镜的读数精度（０．０１ｍｍ）。     

Galvanic cell measurements on supersaturated activities of oxygen in Fe-Al-M (M=C, Te, Mn, Cr, Si, Ti, Zr, and Ce) melts

Using a mullite (3Al₂O₃ · 2SiO₂)-tube and ZrO₂-9 mol pct MgO-plug type solid electrolyte galvanic cells, the activities of supersaturated oxygen in Fe-0.0017 to 0.41 mass pct Al-M (M=C, Te, Mn, Cr, Si, Ti, Zr, and Ce) alloys were measured as a function of total Al or M contents at 1873 K in an alumina crucible. Based on these results, the effects of alloying elements on the supersaturated oxygen activity with respect to alumina precipitation were studied. In the Fe-Al-M (M=C, Te, Mn, Cr, and Si) alloys, the supersaturated oxygen activities for a given Al level approach the equilibrium values with increasing contents of alloying elements. However, the oxygen activities for a given Al level are still supersaturated in the Fe-Al-M (M=Ti, Zr, and Ce) alloys even in the presence of considerable amounts of the alloying elements.     

滑移线场近似作图法的原理

给出了滑移线场近似作图法的原理、证明以及近似滑移线场的特点，为进一步利用计算机求解应力分布和变形规律，尤其是为近似滑移线的计算机绘制奠定了基础．     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。