Role of Gasoline Specifications in the Control of Environmental Pollution

Gasoline is a mixture of about 100 hydrocarbon compounds. Molecular carbon numbers range from C6-C12 and evaporating between ambient temperatures to about 220°C. Gasoline is used in spark ignition engines (cars and motorcycles). The grades and types of gasoline are usually defined in terms of octane numbers. The specifications of gasoline is based mainly on physical properties, which can be related to performance such as volatility and octane number. Chemical components such as oxygen, sulfur, lead, and benzene are also significant. The present trend is to incorporate generic fractions such as aromatics and olefinics in the specifications. How these parameters (specifications) relate to the various fuel requirements and subsequently affect the environment is described in this article.     

Constitutive modeling of concrete in finite element analysis

Approaches generally used in defining constitutive relations for concrete are reviewed. A computer program developed for the three-dimensional finite element analysis of complex reinforced, prestressed, and refractory concrete systems is described. The constitutive models based on isotropic elastic, orthotropic elastic, and plasticity formulations, which are implemented in that program, are discussed in detail. The program incorporates nonlinear material properties, cracking in concrete, shear transfer in cracked reinforced concrete sections, and time dependent effects such as creep, shrinkage, and transient temperature distributions. A wide range of structural problems are analyzed to demonstrate the applicability of the computer program. Comparisons between predictions with different constitutive models, and between predictions and test results are made.     

An approach to locational marginal price based zonal congestion management in deregulated electricity market

Congestion of transmission line is a vital issue and its management pose a technical challenge in power system deregulation. Congestion occurs in deregulated electricity market when transmission capacity is not sufficient to simultaneously accommodate all constraints of power transmission through a line. Therefore, to manage congestion, a locational marginal price (LMP) based zonal congestion management approach in a deregulated electricity market has been proposed in this paper. As LMP is an economic indicator and its difference between two buses across a transmission line provides the measure of the degree of congestion, therefore, it is efficiently and reliably used in deregulated electricity market for congestion management. This paper utilizes the difference of LMP across a transmission line to categorize various congestion zones in the system. After the identification of congestion zones, distributed generation is optimally placed in most congestion sensitive zones using LMP difference in order to manage congestion. The performance of the proposed methodology has been tested on the IEEE 14-bus system and IEEE 57-bus system.     

Investigating the wear characteristics of engineered surfaces: low-temperature plasma nitriding and TiN + MoS x hard-solid lubricant coating

Significant progress has been made in the past decade in plasma nitriding with a majority of the research work focusing on improving hardness and wear resistance of the nitrided surface through the reduction of nitriding temperature, pressure or time. Hard-solid lubricating coatings have also been extensively studied for lowering the wear rate and coefficient of friction of traditional hard coatings such as TiN by the combined effect of hardness and solid lubrication. In this study, the wear characteristics of low-temperature plasma-nitrided steel substrate performed using a Saddle-field fast atom beam source and TiN + MoS _x hard-solid lubricant coating deposited by a closed-field magnetron-sputtering technique have been investigated. The thin hard layer in plasma-nitrided substrates exhibited much higher hardness and lower wear compared to the untreated substrate in pin-on-disc wear testing. In addition, the study of the wear track morphology of the nitrided samples evidenced significant reduction of deeper ploughing and plastic deformation due to higher hardness and load supporting of the nitrided layer. On the other hand, due to the incorporation of MoS₂ in TiN coating, the wear resistance and coefficient of friction were greatly improved in TiN + MoS _x coating compared to pure TiN coating. In contrast to TiN coating, a relatively smoother wear track with less abrasive wear also supported the beneficial effects of adding MoS₂ in TiN coating.     

On the quality of VoIP with DCCP for satellite communications

We present experimental results for the performance of selected voice codecs using Datagram Congestion Control Protocol (DCCP) with CCID4 congestion control over a satellite link. We evaluate the performance of both constant and variable data rate speech codecs for a number of simultaneous calls using the ITU E‐model. We analyse the sources of packet losses and additionally analyse the effect of jitter, which is one of the crucial parameters contributing to Voice over IP (VoIP) quality and has, to the best of our knowledge, not been considered previously in the published DCCP performance results. We propose modifications to the CCID4 algorithm and demonstrate how these improve the VoIP performance, without the need for additional link information other than what is already monitored by CCID4. We also demonstrate the fairness of the proposed modifications to other flows. Although the recently adopted changes to TCP‐Friendly Rate Control specification alleviate some of the performance issues for VoIP on satellite links, we argue that the characteristics of commercial satellite links necessitate consideration of further improvements. We identify the additional benefit of DCCP when used in VoIP admission control mechanisms and draw conclusions about the advantages and disadvantages of the proposed DCCP/CCID4 congestion control mechanism for use with VoIP applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Molecular Beam Epitaxy of Graded-Composition InGaN Nanowires

We report the growth of graded InGaN nanowires by plasma-assisted molecular beam epitaxy. Wire composition is linearly graded from InN to GaN along the length of each wire. The large lattice mismatch between GaN and InN (11%) introduces tensile strain in the graded region, which results in cracking of the wires. Growing with reverse grading (i.e., GaN to InN) results in crack-free nanowires. The composition is measured by energy-dispersive x-ray spectroscopy of individual nanowires performed in a scanning transmission electron microscope, and strain is measured by high-resolution x-ray diffraction.     

Analysis of phase transition,structural and dynamical properties of R290 using molecular dynamics simulation

Propane (R290), a hydrocarbon refrigerant, is an excellent choice of cooling fluids for use in refrigeration and air conditioning systems considering the environmental point of view and system performance. The phase transition phenomenon and structural and dynamic properties of R290 were analyzed through a molecular dynamics (MD) simulation. The densities, isobaric heat capacities and viscosities were computed and the variations of density, volume, potential energy and the nucleation process were examined to investigate the effects of condensation temperature on the phase transition rate. The mean square displacement and velocity autocorrelation function for different temperatures were simulated for dynamical analysis. Radial distribution functions were investigated to get insight into the structural analysis at the atomic level. Shear viscosity and isobaric heat capacity obtained by the present simulation showed a good agreement with the REFPROP data. The structural analysis revealed that the phase transition of R290 did not affect its intramolecular structure.

     

Effects of an ozone-generating air purifier on indoor secondary particles in three residential dwellings

The use of indoor ozone generators as air purifiers has steadily increased over the past decade. Many ozone generators are marketed to consumers for their ability to eliminate odors and microbial agents and to improve health. In addition to the harmful effects of ozone, recent studies have shown that heterogeneous and homogeneous reactions between ozone and some unsaturated hydrocarbons can be an important source of indoor secondary pollutants, including free radicals, carbonyls, carboxylic acids, and fine particles. Experiments were conducted in one apartment and two detached single-family dwellings in Austin, TX, to assess the effects of an ozone generator on indoor secondary organic aerosol concentrations in actual residential settings. Ozone was generated using a commercial ozone generator marketed as an air purifier, and particle measurements were recorded before, during, and after the release of terpenes from a pine oil-based cleaning product. Particle number concentration, ozone concentration, and air exchange rate were measured during each experiment. Particle number and mass concentrations increased when both terpenes and ozone were present at elevated levels. Experimental results indicate that ozone generators in the presence of terpene sources facilitate the growth of indoor fine particles in residential indoor atmospheres. Human exposure to secondary organic particles can be reduced by minimizing the intentional release of ozone, particularly in the presence of terpene sources. PRACTICAL IMPLICATIONS: Past studies have shown that ozone-initiated indoor chemistry can lead to elevated concentrations of fine particulate matter, but have generally been completed in controlled laboratory environments and office buildings. We explored the effects of an explicit ozone generator marketed as an air purifier on the formation of secondary organic aerosol mass in actual residential indoor settings. Results indicate significant increases in number and mass concentrations for particles <0.7 microns in diameter, particularly when an ozone generator is used in the presence of a terpene source such as a pine oil-based cleaner. These results add evidence to the potentially harmful effects of ozone generation in residential environments.     

Nanostructure and mechanical properties of aromatic polyamide and reactive organoclay nanocomposites

Aromatic polyamide/organoclay nanocomposites were synthesized using the solution blending technique. Treatment of montmorillonite clay with p-phenylenediamine produced reactive organophilic clay for good compatibility with the matrix. Polyamide chains were prepared by condensing a mixture of 1,4-phenylenediamine and 4-4′-oxydianiline with isophthaloyl chloride under anhydrous conditions. These chains were end capped with carbonyl chloride using 1% extra acid chloride near the end of reaction to develop the interactions with organoclay. The dispersion and structure–property relationship were monitored using FTIR, XRD, FE-SEM, TEM, DSC and tensile testing of the thin films. The structural investigations confirmed the formation of delaminated and disordered intercalated morphology with nanoclay loadings. This morphology of the nanocomposites resulted in their enhanced mechanical properties. The tensile behavior and glass transition temperature significantly augmented with increasing organoclay content showing a greater interaction between the two disparate phases.     

Influence of ferrite-martensite microstructural morphology on tensile properties of dual-phase steel

The influence of ferrite-martensite microstructural morphology, volume fraction of martensite, epitaxial ferrite on the tensile behaviour of dual-phase steels, was studied. It was observed that increasing the martensite content and its aspect ratio raised tensile strength and ductility. Epitaxial ferrite in rolled material strongly reduced the strength and improved the ductility, suggesting that substructure strengthening of material, as well as increased stress transfer to the hard phase, contribute to the strength of thermo-mechanically processed material. Mettallographic analysis of deformed samples revealed that void nucleation occurs predominantly along the ferrite-martensite interface. The void density in the necked region increased towards the fracture surface in all samples and was higher for samples which exhibited localized necking.