Semiconductor Nanowire Light‐Emitting Diodes Grown on Metal: A Direction Toward Large‐Scale Fabrication of Nanowire Devices

Bottom‐up nanowires are attractive for realizing semiconductor devices with extreme heterostructures because strain relaxation through the nanowire sidewalls allows the combination of highly lattice mismatched materials without creating dislocations. The resulting nanowires are used to fabricate light‐emitting diodes (LEDs), lasers, solar cells, and sensors. However, expensive single crystalline substrates are commonly used as substrates for nanowire heterostructures as well as for epitaxial devices, which limits the manufacturability of nanowire devices. Here, nanowire LEDs directly grown and electrically integrated on metal are demonstrated. Optical and structural measurements reveal high‐quality, vertically aligned GaN nanowires on molybdenum and titanium films. Transmission electron microscopy confirms the composition variation in the polarization‐graded AlGaN nanowire LEDs. Blue to green electroluminescence is observed from InGaN quantum well active regions, while GaN active regions exhibit ultraviolet emission. These results demonstrate a pathway for large‐scale fabrication of solid state lighting and optoelectronics on metal foils or sheets.     

Insights into cadmium induced physiological and ultra-structural disorders in Juncus effusus L. and its remediation through exogenous citric acid

This study appraised cadmium (Cd) toxicity stress in wetland plant Juncus effusus, and explored its potential for Cd phytoextraction through chelators (citric acid and EDTA). Cadmium altered morphological and physiological attributes of J. effusus as reflected by growth retardation. Citric acid in the presence of 100 μM Cd significantly countered Cd toxicity by improving plant growth. Elevated Cd concentrations reduced translocation factor that was increased under application of both chelators. Citric acid enhanced Cd accumulation, while EDTA reduced its uptake. Cadmium induced oxidative stress modified the antioxidative enzyme activity. Both levels of citric acid (2.5 and 5.0 mM) and lower EDTA concentration (2.5 mM) helped plants to overcome oxidative stress by enhancing their antioxidative enzyme activities. Cadmium damaged the root cells through cytoplasmic shrinkage and metal deposition. Citric acid restored structure and shape of root cells and eliminated plasmolysis; whereas, EDTA exhibited no positive effect on it. Shoot cells remained unaffected under Cd treatment alone or with citric acid except for chloroplast swelling. Only EDTA promoted starch accumulation in chloroplast reflecting its negative impact on cellular structure. It concludes that Cd and EDTA induce structural and morphological damage in J. effusus; while, citric acid ameliorates Cd toxicity stress.     

Effects of varying forage and concentrate carbohydrates on nutrient digestibilities and milk production by dairy cows.

Five Holstein cows with ruminal cannulas were used in a 5 x 5 Latin square design to determine the effect of replacing forage NDF with soyhull NDF and varying concentrations of nonstructural carbohydrates on nutrient digestion and milk production. Diets in which NDF percentage from forage (corn silage: alfalfa hay, 1:1) was 80 (control), 70, or 60 were formulated by substituting soyhulls for forage; total forage was 43.2, 36.7, and 31.1% of the diets, respectively, but total NDF was 31%. Nonstructural carbohydrates were formulated to be 47 (control), 35, or 25% by substituting soyhulls, roasted soybeans, and Ca soaps for concentrate. Ruminal acetate: propionate ratio decreased linearly when diets lower in forage NDF were fed, but it increased quadratically when dietary nonstructural carbohydrates were reduced. Apparent digestibility of OM increased quadratically, but NDF digestibility and lactation performance were unaffected when diets lower in forage NDF were fed. Digestibility of NDF increased linearly when nonstructural carbohydrates were reduced, perhaps because of greater digestibility of soyhull NDF and smaller negative associative effects. Fat from soybeans and Ca soaps was increased as nonstructural carbohydrates decreased. Added fat probably increased fatty acid digestibility and decreased milk protein percentage. Greater FCM production without correspondingly greater feed intake or BW loss increased feed efficiency as nonstructural carbohydrates decreased. In dairy rations containing soyhulls, 60% of dietary NDF from forage should maintain lactation performance, and decreasing nonstructural carbohydrates to 25 to 35% of feed DM, coupled with adding dietary fat, may decrease negative associative effects and improve efficiency of milk production.     

A NON-FICKIAN SURFACE EXCESS MODEL FOR CHEMICAL TRANSPORT THROUGH FRACTURED POROUS MEDIA

The transport of a solute through fractured rock domains is of major concern in various disciplines. The transport of chemicals in a porous medium is not a very well understood phenomenon, especially if the meidum is fractured. A study was conducted to invertigate the transport process of three selected chemicals in a fractured porous medium. A series of laboratory flow experiments was conducted in silica sand packs using a single fracture. Forty six runs were conducted to investigate the effects of chemical concentration, flow rate, and fractures in the transport process. A numerical model was developed that employed a one-dimensional transport equation combined with the surface excess concept to describe absorption equilibrium in the solid/liquid interface. Functional forms of the dispersion parameter (λ) and the kinetic desorption constant (k₂) were used to take into account the effect of the fracture on the porous medium. This non-fickian simulation results showed excellent agreement with experimental results. The developed model accommodates various interactions between the solid and the liquid phases. Therefore, it can be used for different chemical and rock types with little modification.     

X-ray structure of 5-aminolaevulinate dehydratase, a hybrid aldolase

5-Aminolaevulinate dehydratase (ALAD) is a homo-octameric metallo-enzyme that catalyses the formation of porphobilinogen from 5-aminolaevulinic acid. The structure of the yeast enzyme has been solved to 2.3 A resolution, revealing that each subunit adopts a TIM barrel fold with a 39 residue N-terminal arm. Pairs of monomers wrap their arms around each other to form compact dimers and these associate to form a 422 symmetric octamer. All eight active sites are on the surface of the octamer and possess two lysine residues (210 and 263), one of which, Lys 263, forms a Schiff base link to the substrate. The two lysine side chains are close to two zinc binding sites one of which is formed by three cysteine residues (133, 135 and 143) while the other involves Cys 234 and His 142. ALAD has features at its active site that are common to both metallo- and Schiff base-aldolases and therefore represents an intriguing combination of both classes of enzyme. Lead ions, which inhibit ALAD potently, replace the zinc bound to the enzyme's unique triple-cysteine site.     

Quality Assessment of Furnace Oil with Special Reference to Trace Metals

Furnace oil is the residual product of petroleum. All the impurities and metal content of petroleum are concentrated in it. Fluctuation in properties and contaminations, either deliberately or accidentally, are very frequent in this product. Physical and chemical test methods are used to access the quality of the furnace oil alongwith instrumental analytical methods. Various instrumental techniques such as atomic absorption spectroscopic, emission spectroscopic, and flame photometric methods have been used for determination of trace metals. A comparison of the results of trace metals has been drawn. Salt content of the furnace oil has been related to the total metal content. Sixteen imported furnace oils have been studied and compared against standard specification.     

The protein quality of some enteral products is inferior to that of casein as assessed by rat growth methods and digestibility-corrected amino acid scores

Protein digestibility and quality of six enteral nutrition products sold in Canada were studied by rat balance and growth methods. Casein+L-methionine, 0.2 g/100 g diet (control) and six enteral products (freeze-dried) were fed as the sole source of protein in diets containing 8.61-9.12 g/100 g protein (N x 6.25) to weanling and 18-mo-old rats for a period of 2 and 1 wk, respectively. A protein-free diet was also included in the feeding studies to permit calculations of true protein digestibility and net protein ratio values. Values for true digestibility of protein as determined in old rats for the control diet and the test products were 95 and 89-93%, respectively. Compared with old rats, protein digestibility values were 5-7 percentage units higher in young rats. The 2-wk relative protein efficiency ratio values (42-56%) or the relative net protein ratio values (61-74%) of the enteral products were considerably lower compared to those of the control (100). Supplementation of an enteral product with cysteine, cysteine + tryptophan, cysteine + threonine or cysteine + tryptophan + threonine caused significant improvement in protein quality; suggesting that the product was limiting in these three amino acids. The protein digestibility-corrected amino acid scores for the enteral products were 43-46, 69-75 and 86-93% by using whole egg, casein and the FAO-WHO (1991) pattern as reference proteins, respectively. The results indicate that these enteral products are inferior to casein in protein quality.     

Evaluation of the Chiral DIANANE Backbone as Ligand for Organolithium Reagents

Novel endo,endo‐2,5‐diaminonorbonane‐derived tertiary C₂‐symmetrical diamines were synthesized via the one‐pot reductive amination of enantiomerically pure norbornane‐2,5‐dione. These ligands were applied to various catalytic reactions such as asymmetric deprotonation, asymmetric bromine‐lithium exchange, and enantioselective addition of aryl‐ and allkylithium reagents to aromatic aldimines.     

Novel aromatic and aromatic–aliphatic poly(thiourea‐amide)s for the extraction of toxic heavy metal ions

A series of novel aromatic and aromatic–aliphatic diamines [isophthaloyl bis(3‐(3‐aminophenyl)thiourea), terephthaloyl bis(3‐(3‐aminophenyl)thiourea), adipoyl bis(3‐(3‐aminophenyl)thiourea), sebacoyl bis(3‐(3‐aminophenyl)thiourea)] were synthesized starting from the dinitro compounds. Spectroscopic and elemental analyses were carried out for the structure elucidation of the monomers. Three series of poly(thiourea‐amide)s (PTAMs) bearing C?S groups were prepared through the condensation of new diamines with the diacid chlorides such as isophthaloyl, terephthaloyl and adipoyl chloride. The ensuing PTAMs were characterized using FTIR, ¹H‐NMR and ¹³C‐NMR techniques. Physical properties of the polymers such as solution miscibility, crystallinity, solution viscosity, molecular weight, and thermal properties were measured. Consequently, good organosolubility of these polymers was experiential in amide solvents as DMAc, DMF, DMSO and NMP. Moreover, PTAMs exhibited η_inh in the range of 0.92–1.56 dL/g and GPC measurements revealed M_w around 607 × 10²‐851 × 10². DSC served to envisage the glass transition temperatures (T_g) of poly(thiourea‐amide)s located between 232 and 258°C and the initial decomposition temperatures (T₀) probed by thermogravimetry were in the range of 305–419°C. Structure‐property relationship of these polymers was also studied. Eventually, solid?liquid extraction tests of the selected poly(thiourea‐amide)s systems revealed excellent results because these polymers show nearly 100% elimination of lead and mercury cations from water media. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Characteristics of Dioxane Lignins Isolated at Different Ages of Nalita Wood (Trema orientalis)

Abstract

Nalita (Trema orientalis) is one of the fastest growing trees in the tropical countries. The structural characteristics of lignin isolated at different ages of Nalita wood (Trema orientalis) by acidolytic dioxane method were examined by UV, FTIR, ¹H‐NMR and ¹³C‐NMR spectroscopy, alkaline nitrobenzene oxidation, molecular weight determination, elemental and methoxyl analysis. The data were compared with aspen lignin. The structural analysis revealed that Nalita wood lignin is syringyl‐guaiacyl type. The methoxyl content in Nalita wood lignin was lower than aspen lignin. The C₉ formulas for 30‐months‐old Nalita was C₉H_9.31O_3.13(OCH₃)_1.27, whereas that of aspen was C₉H_8.94O_3.15(OCH₃)_1.47. The weight average molecular weight of Nalita wood lignin was decreased from 36,500 to 25,500 with increasing tree age from 12 to 30 months, whereas weight average molecular weight of aspen was 20,000. Both alcoholic and phenolic hydroxyl group in Nalita wood lignin is lower than aspen lignin.