拉赫马宁海浪谱的再认识

利用拉赫马宁海浪谱的有理函数形式在谱的峰值、峰值频率和总能量三个方面对工程上广为应用的Pierson-Moskowitz海浪谱进行了有理化逼近,给出了一个较为理想的有理海浪谱,并利用该有理谱构造了成型滤波器.结果表明:本文给出的有理海浪谱是一个非常理想的海浪谱,它为海浪的模拟与船舶控制工程领域海浪为有色干扰的变换问题均带来了极大的方便.     

任意四边形薄板自然频率的加权残值法计算

本文采用变换的办法解决了加权残值法在计算任意四边形薄板问题时边界条件不易处理的困难,拓广了加权残值法在处理非规则外型固体力学问题方面的应用范围,使工程人员更易掌握板的自然频率的计算。     

药用植物白芍愈伤组织中产芍药双苷的研究(英文)

In order to facilitate the preparation of paeoniflorin (PF) and albiflorin (AF), two chief bioactive constituents in Paeonia lactiflora Pal (PL), induction and culture of callus from PL were studied. With a modified woody plant medium supplemented with 0.5 mg·L?1 6-benzylaminopurine, 1.0 mg·L?1 naphthylacetic acid, 0.1 mg·L?1 thidiazuron and 30 g·L?1 sucrose, callus was induced from four kinds of explants:leaf, stems, petiole, and root. The potency to form callus varies between different explants and leaf explants exhibits the highest capacity (100%). On the other hand, root-derived cal us (R-callus) produces the highest level of total amount of PF and AF, 31.8 mg·g?1 dry mass, which is higher than the corresponding level in the root of field cultivated PL. Further-more, the time needed is only 40 days, remarkably shorter than the cultivation time of PL, about 4–5 years. Higher accumulation levels of PF and AF with shorter production time indicate that cal us culture of PL is a promising powerful tool for production of PF and AF in the future.     

A novel thermoplastic polyurethane scaffold fabrication method based on injection foaming with water and supercritical carbon dioxide as coblowing agents

Injection foaming is an method for mass producing lightweight, foamed plastic components with excellent dimensional stability while using less material and energy. In this study, a novel injection foaming method employing supercritical CO₂ (scCO₂) and water as coblowing agents was developed to produce thermoplastic polyurethane (TPU) components with a uniform porous structure and no solid skin. Various characterization techniques were employed to investigate the cell morphology, crystallization behavior, and static and dynamic mechanical properties of solid injection molded samples, foamed samples using CO₂ or water as a single blowing agent, and foamed samples using both CO₂ and water as coblowing agents. When compared with CO₂ foamed samples, samples produced by the coblowing method exhibited much more uniform cell morphologies without a noticeable reduction in mechanical properties. Moreover, these TPU samples had almost no skin layer, which permitted the free transport of nutrients and waste throughout the samples. Such a mass‐produced, skin‐free structure is desirable in tissue engineering. In this study, the biocompatibility of the scaffolds was confirmed and the effect of these blowing agents on the TPU foaming behavior was studied. POLYM. ENG. SCI., 54:2947–2957, 2014. © 2014 Society of Plastics Engineers     

超滤离心在双水相萃取大肠杆菌谷氨酸脱羧酶中的应用

建立聚乙二醇(PEG)/磷酸氢二钾(K2HPO4)双水相体系,通过对大肠杆菌(Escherichia coli AS1.505)细胞进行超声波破碎制得谷氨酸脱羧酶(glutamate decarboxylase,GAD)酶液,并利用双水相萃取对GAD进行分离纯化,然后,采用超滤离心对双水相上相中的GAD与PEG进行分离并分别回收。实验结果表明,大部分GAD分配于上相,其纯化倍数为55.60,酶活率为97.78%。通过响应面分析,对超滤离心工艺参数进行优化,确定了超滤离心转速为10 000 r/min,离心时间为20 min,混合液的稀释倍数为5倍,此条件下GAD的回收率为81.52%,PEG的回收率为84.41%。     

The toughening effect and mechanism of styrene‐butadiene rubber nanoparticles for novolac resin

In this article, phenolic nanocomposites were prepared using styrene–butadiene rubber (SBR) nanoparticles with an average particle size of about 60 nm as the toughening agent. The mechanical and thermal properties of phenolic nanocomposites and the toughening mechanism were studied thoroughly. The results showed that when adding 2.5 wt % SBR nanoparticles, the notched impact strength of phenolic nanocomposites reached the maximum value and was increased by 52%, without sacrificing the flexural performance. Meanwhile, SBR nanoparticles had no significant effect on the thermal decomposition temperature of phenolic nanocomposites. The glass‐transition temperature (T_g) of phenolic nanocomposites shifted to a lower temperature accompanying with the increasing T_g of loaded SBR, which showed there was a certain compatibility between SBR nanoparticles and phenol‐formaldehyde resin (PF). Furthermore, the analysis of Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy indicated that there existed a weak chemical interaction between SBR nanoparticles and the PF matrix. The certain compatibility and weak chemical interaction promoted the formation of a transition layer and improved the interfacial bonding, which might be important reasons for the great enhancement of the toughness for phenolic nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41533.     

Microstructure and characterization of electrospun poly(vinyl alcohol) nanofiber scaffolds filled with graphene nanosheets

Graphene nanosheets (GNSs) have attracted significant scientific attention because of their remarkable features, including exceptional electron transport, excellent mechanical properties, high surface area, and antibacterial functions. Poly(vinyl alcohol) (PVA) solutions filled with GNSs were prepared for electrospinning, and their spinnability was correlated with their solution properties. The effects of GNS addition on solution rheology and conductivity were investigated. The as‐spun fibers were characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC). The results revealed the effects of GNS on the microstructure, morphology, and crystallization properties of PVA/GNS composite nanofibers. The addition of GNSs in PVA solution increased the viscosity and conductivity of the solution. The electrospun fiber diameter of the PVA/GNS composite nanofiber was smaller than that of neat PVA nanofiber. GNSs were not only embedded at the fibers but also formed protrusions on the fibers. In addition, the crystallinity of PVA/GNS fiber decreased with higher GNS content. The possible application of PVA/GNS fibers in tissue engineering was also evaluated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41891.     

金属有机骨架膜的制备与应用进展

膜分离技术因其高效节能的特点,被认为是最有前景的分离技术之一。由于众多待分离的混合组分在物理性质（如尺寸）上极为接近,实现精确的膜分离仍具有极大的挑战。金属有机骨架材料具有孔径精确可调、孔隙率高等优点,使其有望实现对尺寸相近分子的精确筛分,因此可以作为理想的膜材料。本文对传统的多孔膜材料进行了比较,并对基于金属有机骨架材料的多孔膜进行了分类,包括支撑型金属有机骨架膜和混合基质膜。同时,系统地总结了两大类金属有机骨架膜的制备方法及其发展历程,对先进的膜制备技术进行了展望;总结了金属有机骨架膜在气体分离、纳滤及海水淡化、渗透汽化等方面的应用。最后,针对支撑型金属有机骨架膜提出了改善其透量和选择性的思路。